Stentorian AT-7 100W MOD Review– A water-cooling Case in Hand!

Water-cooling case has always been the ideal choice for those PC (personal computer) players. Water-cooling function is mainly for balancing the heat on the chipset, and secondly for lowering the noise when the PC is on operation.

Then why this newly released Stentorian AT-7 100W mod is special?

Why it’s called water-cooling case in hand? Let’s check it out!

AT-7 is designed by the team named Stentorian from California, USA.

  1. Water-cooling radiatingtube: The inspiration of design comes from the temperature-lowering circulatory system of the water-cooling tube on the high-end game DIY PC.

 

  1. Original super-large scale motherboard, enlarged heat dissipating area, stable performance, longer life span.

 

  1. Special pressure-boosting chipset board to stabilize the voltage and maintain the constant wattage output of the mod. Its performance can compare favorably with intel i7 CPU.

  1. Unique color design of the lights

The lights indicate the remnant power of the battery.

When the remnant battery is between 70%-100%, the color is white.

When the remnant battery is between 30-70%, the color is blue.

When the remnant battery is less than 30%, the color is red.

  1. The whole-board button is very durable and conforms to the ergonomics. Vapers can play it with variable gestures at will.

6.Self-adaptable smart wattage output

Output wattage≤ 100w, resistance≥0.1Ω

RDA, RTA and TANK can all be supported.

Auto-match optimum wattage according to the different resistances of the atomizers.

Better experience of both flavor and vapor.

  1. Strong protective function

Over-time vaping protection: if vaping time is longer than 10 seconds.

If the battery indication light is off, when you take a second draw, the light will be on immediately.

Low battery warning: when the battery is lower than 3.3v, the red light will flash 10 times every time when you take a draw.

Output short-circuit protection: When the output end is short-circuited, the red light will flash 5 times for indication.

Name: AT-7

Measurements: 75*30*90mm

Battery: 3500mah imported RC battery

Current: 3500A continuous discharge

Charging: USB fast charge

RC battery is the basis for continuous discharge.

Power bank, the supportive representative of USB fast charge technique, can be used for charging Stentorian AT-7 100w mod.

Use coupon code AT10 at Urvapin to get 10% off for a Stentorian AT-7 100w mod ! To buy electronic cigarette online, Urvapin is always your best choice to find bountiful cheap vape deals!

electronic cigarette

ijoy captain pd270

smok stick v8

tesla terminator

USV L 75W Box Mod Review–Design of Simplicity

United Society of Vape, shorted for USV, seems to be pretty exciting about releasing their new product USV L 75W Box Mod with loads of photographs being posted on their social platforms. Just like its simple design, let’s make it simple here and get to the point. Read on!


USV L 75W Box Mod is packed inside of a square black box. On the box, you can see the brand name USV on the front side and on its back side, there is printed with the conception of its design some basic information of this vaping world newcomer, contents and warning information. I like its saying “chuck flavorful clouds all day”.


When I opened the box, I was surprised with two points. First is that the color of the mod is quite attractive and second is that what’s the dice for? Well, you can make a guess and tell me below. Besides, there is a USB cable inside of a small black box. Below the sponge interlayer, there is a user manual and a warranty card.

The color of the mod that I have should be accurately called Tiffany Blue. Surely a pretty color! USV L 75W is totally in the shape of rectangular with only a fire button on it. On the top of the body, there is the 510 connector and beside it, there is carved with the brand name USV. Also on the front side and the back side of the mod body, there are both printed with its brand name USV.Excuse me?? Isn’t it too simple? No screen, no fire buttons? And, where is the battery compartment?


USV has actually meant to design a device with all the adjustment buttons and ports being concealed. The plates are designed to be removable as shown above. On one side, there is a fire button which you can see even with the two plates on, a screen, two fire buttons and a USB port. For vapers who have been long used to have the screen outside of the mod, it will take time to get accustomed to it.


USV L 75W box mod is powered by single 18650 battery. When removing the two plates, the battery compartment is totally exposed without side panels. Quite special!

By pressing the fire button five times, you can turn on the device. This mod totally has three modes for selection, VPC mode(VPC is shorted for Variable Power Control ), TC mode, Power Mode and Bypass mode. Detailed operations are instructed in the User Manual.


USV L 75W POWER/BYPASS/TEMP/VPC Box Mod Features & Spec:
510 Spring Connection
Single 18650
Concealed LED screen
Powered by the VO chip
Swappable panel doors
Temp Control 212-572 °F or 100-300 C
VPC with 5 separate memory settings
USB charging with pass thru vaping
Customizable screen logo
USV L 75W POWER/BYPASS/TEMP/VPC Box Mod Package:
1 * USV L Box Mod
1 * Micro-USB Cable
1 * Collector’s Dice
1 * User Manual
1 * Warranty Card
USV L 75W Box Mod is designed into a simple-look vaping device, but it performs pretty well with its innovative Vo chipset and variable mode options. For the light vapers and the fans of simplicity, USV L 75W can be a pretty good choice!
Use coupon code USV10 at Urvapin to get 10% off for a USV L 75W! To buy electronic cigarette online, Urvapin is always your best choice to find bountiful cheap vape deals!
Stay tuned! Soon come the Review of Vapeman Steam Engine 75w Mod!

cheap vape deals

osub 80w baby

asvape michael mod

snowwolf vfeng

iJoy Captain PD270 234W TC Box Mod Review–Adaptable with Both 20700 and 18650 Batteries


It is packed in a drawer-style package with a hat box in it. On the surface of the package, there is a picture of Captain PD270 on it. The one I have is in black color. The hat box is is white color. In the first layer of it, you will see the Captain PD270 box mod. Under it, you will see a USB cable, a manual, a 18650 adaptor, and a warranty card. If you choose the battery version, there will be two 20700 batteries inside of it.

When you first get your hand on it, it feels pretty comfortable with its leather-like material on it and its ergonomically structure design. It measures 89mm high, 48mm wide and 32mm thick, very proper size to handle.

Its fire button has a pretty big pressing area which is easy to be found. But some vapers may think the same as me, big yet unnecessary. The screen is on the front side with detailed information displaying on it, including wattage, resistance, amperage, voltage, puff times, how long a puff take, remanent power of two batteries and mode. Below the screen, you will see two adjustment buttons and a USB port, the common design.


On the top of the mod, it is the design of the 510 connector. Since it measures 32mm thick, Captain PD270 is able to hold an atomizer of 30mm diameter without overhang, as showing in the picture.


To open the battery compartment, you need to pull open it with your finger. The battery compartment is firstly designed for dual 20700 batteries. With the 18650 battery adaptor in the package, it can also powered by dual 18650 batteries. With the instruction of pole direction on the lid, you can easily insert the battery in.

By pressing the fire button five times continuously, you can turn on the box mod. By pressing the fire button three times, you can choose the mode, set the screen time and reset the puff. It supports modes, such as power mode (norm, hard, soft and user) and temperature mode (TC-Ni, TC-Ti, TC-SS, M1, M2)There are several protections including PCB Too Hot, Low Battery, Shorted, No Atomizer, Ohms Too Low, Ohms Too High.

Of course, the detailed operation instruction can be found in the manual.

Product Features: 
Compact and portable
Bright and big size screen
Dual 20700 batteries box mod (batteries included)
18650 battery fit with adapter
Personalized design, with a unique experience
NI/TI/SS temperature control
TCR function
Unique Custom User Mode
Resistance Range: 0.05~3.0ohm
USB port charging support
Firmware Upgradeable

Packing List: 
1* IJOY Captain PD270 Box Mod (234w)
2*IJOY 20700 Batteries
1*18650 ADAPTOR
1*USB Cable
1*Manual
1*Warranty Card

PD270 VS Cloupor X3

Ijoy PD 270 mod, being quite favorably accepted by the markets, will surely satisfy your vaping needs. Place the order now! Use Coupon Code “captain10” to get 10% off!

To buy electronic cigarette online, Urvapin is always your best choice to find bountiful cheap vape deals.

Official Website: www.urvapin.com 

Best Seller:
snowwolf vfeng 

lmc 200w box mod 

 

Voopoo Drag 157w Box Mod Review–Excellent Design with Well-Built Quality

 When I first heard the name of Voopoo Drag 157w, I was actually surprised by both its name and the maximum wattage. As you can see, they both are odd, really. I’m going to disclose its reality here for you. Let’s check it out.

Package

Voopoo Drag 157w is packed in a hat box with the classic red-black color scheme. The material of the box cover is very similar to leather. On it, there is printed with its brand Voopoo and the name of this box mod, DRAG(with Genen Chip) on the front side. On one of the side faces, there is also printed with the brand name “Voopoo”.

Packing List 
 
When you remove the cover, you will see the box mod, really a box is in the middle of it. It feels , o me , a little bit heavyt(an 47kg young lady. ) From its weight, I can tell this box mod is made of very good material and of pretty good quality. I’ve tried to figure out what the material is, but did not find the exact answer yet. Under the interlayer, there is the accessories including a USB cable, a warranty card, a user manual and a gene chip card.

Appearance 

From the picture you can see, Voopoo Drag mod is totally a box mod with two diagonal corners cut off. It’s said that the material of the front side is made carbon fiber. On the opposite side, there is engraved with the name of the box mod–DRAG. The shape of it just echoes the carbon fiber panel of the opposite side.

 

On the top, as you can see,  there is the 510 connector with two screws fixing it firmly to the mod. I tried with screwing my new Coilart Dpro RDA on it and I pulled the integrated top cap off from the RDA with great force. The result is that the the 510 connector stayed unswervingly on the box mod. Thought I didn’t try to pull it with pliers, I’m sure there would be completely no worry of a loose connector in normal use. At the bottom, there are two lines of needle-styled venting holes, totally twelve. Besides, there is also engraved with not-to-mention-here information.

On one of the side faces, there is the fire button, screen, two adjustment buttons “+” “-”, and the USB port. The fire button is pretty ergonomically designed and the feedback of pressing is very ringing. The screen is not very big, displaying corresponding information and battery remnant power under different modes. The two adjustment buttons are in vertical arrangement.

Battery compartment   
 
The panel with the character “Drag” on it is actually the cover of the battery compartment. On the inner side of it, there are two magnet strips on it. (see picture) In the battery compartment, the negative and positive poles are clearly designated, and two of the electrode points are spring loaded with pretty strong elastic force. At the side, there is a draw cord as you see on many other box mods.

Operation Intro: 
 
 
 
 
 
The detailed information has been depicted in the user manual. Here I still want to give a brief introduction.

To press the fire button five times continuously, you turn on the box mod. Long-pressing the fire button to take draws. Press the fire button three time continuously, you can switch between the different mode, VW mode, TC-SS mode, TC-Ti mode and TC-Ni mode. By pressing the “+”and”-” button simultaneously for 1.5 seconds, you will enter into the selection interface, including W (normal mode), M (customization mode, totally ), SN (Serial Number), Software version.

To some new vapers, the operation can be pretty simple. To the experienced vapers, it will bring much of fun with the customization mode and its up-gradable firmware.

Likes & Dislikes:

Likes:

  1. Very very good quality
  2. Operation is easy
  3. Battery compartment is well designed

510 connector is firmly fixed.
One-Watt adjustment increments.

Dislikes:

  1. The hand feel of the mod body is sharp.
  2. It’s heavy to carry around.


Well, the truth is the truth, and the experience is my personal truth. If you want to have a try on this Voopoo Drag 157W, better quick to place the order at Urvapin. It’s on sale now only sold $49.89.

To buy electronic cigarette online, Urvapin is always your best choice to find bountiful cheap vape deals.

Official Website: www.urvapin.com 

Best Seller:
snowwolf vfeng

lmc 200w box mod

Voopoo Drag 157w Box Mod Review–Excellent Design with Well-Built Quality

When I first heard the name of Voopoo Drag 157w, I was actually surprised by both its name and the maximum wattage. As you can see, they both are odd, really. I’m going to disclose its reality here for you. Let’s check it out.

Package


Voopoo Drag 157w is packed in a hat box with the classic red-black color scheme. The material of the box cover is very similar to leather. On it, there is printed with its brand Voopoo and the name of this box mod, DRAG(with Genen Chip) on the front side. On one of the side faces, there is also printed with the brand name “Voopoo”.

Packing List 
 
When you remove the cover, you will see the box mod, really a box is in the middle of it. It feels , o me , a little bit heavyt(an 47kg young lady. ) From its weight, I can tell this box mod is made of very good material and of pretty good quality. I’ve tried to figure out what the material is, but did not find the exact answer yet. Under the interlayer, there is the accessories including a USB cable, a warranty card, a user manual and a gene chip card.

Appearance 

 From the picture you can see, Voopoo Drag mod is totally a box mod with two diagonal corners cut off. It’s said that the material of the front side is made carbon fiber. On the opposite side, there is engraved with the name of the box mod–DRAG. The shape of it just echoes the carbon fiber panel of the opposite side.

 

On the top, as you can see,  there is the 510 connector with two screws fixing it firmly to the mod. I tried with screwing my new Coilart Dpro RDA on it and I pulled the integrated top cap off from the RDA with great force. The result is that the the 510 connector stayed unswervingly on the box mod. Thought I didn’t try to pull it with pliers, I’m sure there would be completely no worry of a loose connector in normal use. At the bottom, there are two lines of needle-styled venting holes, totally twelve. Besides, there is also engraved with not-to-mention-here information.

On one of the side faces, there is the fire button, screen, two adjustment buttons “+” “-”, and the USB port. The fire button is pretty ergonomically designed and the feedback of pressing is very ringing. The screen is not very big, displaying corresponding information and battery remnant power under different modes. The two adjustment buttons are in vertical arrangement.

Battery compartment   
 
The panel with the character “Drag” on it is actually the cover of the battery compartment. On the inner side of it, there are two magnet strips on it. (see picture) In the battery compartment, the negative and positive poles are clearly designated, and two of the electrode points are spring loaded with pretty strong elastic force. At the side, there is a draw cord as you see on many other box mods.

Operation Intro: 
 
 
 
 

 

The detailed information has been depicted in the user manual. Here I still want to give a brief introduction.

To press the fire button five times continuously, you turn on the box mod. Long-pressing the fire button to take draws. Press the fire button three time continuously, you can switch between the different mode, VW mode, TC-SS mode, TC-Ti mode and TC-Ni mode. By pressing the “+”and”-” button simultaneously for 1.5 seconds, you will enter into the selection interface, including W (normal mode), M (customization mode, totally ), SN (Serial Number), Software version.

To some new vapers, the operation can be pretty simple. To the experienced vapers, it will bring much of fun with the customization mode and its up-gradable firmware.

Likes & Dislikes:

Likes:

  1. Very very good quality
  2. Operation is easy
  3. Battery compartment is well designed

510 connector is firmly fixed.
One-Watt adjustment increments.

Dislikes:

  1. The hand feel of the mod body is sharp.
  2. It’s heavy to carry around.

Well, the truth is the truth, and the experience is my personal truth. If you want to have a try on this Voopoo Drag 157W, better quick to place the order at Urvapin. It’s on sale now only sold $49.89.

To buy electronic cigarette online, Urvapin is always your best choice to find bountiful cheap vape deals.

Official Website: www.urvapin.com

Best Seller:
snowwolf vfeng

lmc 200w box mod

Asvape Michael vo200 Box Mod Devils Night Review–Artistic Appearance

Intro: With its artistic appearance and edge-cutting chipset,  Asvape Michael vo200 Box Mod is really a must to have in collection.

If you have no idea of the story of Devils Night, here I would like to share the story with you.


Devils Night is an old story originated from China and India and then was
transferring into Japan. It was combined with the local culture and formed a new version of it. There are totally one hundred devils in the story.


The size of Asvape Michael is 91.5mm*28*60mm. The pattern on the box mod is made
of some material, whose hand feel is very similar to human skin. The pattern adopts
stereoscopic water transfer technology.The cool pattern
matches with the stereoscopic surface, making it a perfect box mod.


The perfect combination of the visual sensation and hand feel
satisfies the daily use of vapers very well.


The frame of Asvape Michael is made of zinc-alloy. On the surface, it is processed with the sand-blasting technique and is dark golden-plated.The color and the mod complement each other. The fire button made of stainless steel matches with the integrated adjustment button, giving it an upscale look.


At the 510 connector, it adopts an embedded panel with the designer’s
signature on it. The purpose is to conceal the thread and gives the vaper a perfect sensual experience.
The connector is a spring-loaded electrode plated with mainstream gold. No matter it matches with atomizers of 22mm diameter or 24 to 25 diameter, they will all be a perfect match.


The battery compartment at the bottom adopts a pull-out cover. On the cover,
there is carved with the mark of positive and negative electrode signs. When
you press down the cover, just push it slightly to close it. The magnets on
the inner side of the cover can double fix the cover onto the mod.


The pressure dissipating holes at the two sides of the cover can effectively dissipate the heat inside of the mod. In actual use, there is no obvious heating from the mod.

There is no need for me to illustrate the vo200 chipset. The wattage can range from 5 to 200watt. The instant explosiveness of the by-pass mode and the accurate taste mode provided by the curve output has become the symbol of Vo chipset.


It’s no exaggeration to say the Asvape Michael released by Asvape company this time is a high and mid grade box mod with super high performance price ratio.

No matter the cost-ignoring art or the excellent hand feel, they both prove Asvape Michael Vo200 is of high and mid grade configuration.
It’s price is pretty affordable and sold only $69.79 at Urvapin.

To buy electronic cigarette online, Urvapin is always your best choice to find bountiful cheap vape deals.

Official Website: www.urvapin.com

Best Seller:
snowwolf vfeng

lmc 200w box mod