Mage Colander: Mage RTA V2 by CoilArt

CoilArt has released the Mage RTA V2 tank. The device received a drainless base for one or two spirals, an adjustable bottom airflow and an increased flask of 5.5 milliliters.

On March 21, CoilArt presented the Mage RTA V2 device on instagram  . Tank made of stainless steel. Wide driptyp belted a metal ring at the base. Under the twisting lid hid two filling holes. The dome was decorated with branded engraving. Bottom positioned ring to adjust the blower. It, like topkep, received a narrow profile and a rough surface, for convenient interaction.


Bareless, gilded base is designed for one or two spirals. A semicircular “ramp” dotted with a multitude of holes will provide volume airflow – from the bottom and at an angle. On the sides are baths for laying cotton wool. The volume can be increased from 3.5 to 5.5 milliliters using an expanded flask.

The Mage RTA V2 package includes a spare glass, a screwdriver repair kit and instructions.

Main characteristics:

  • Height – 46 mm
  • Diameter – 24 mm
  • Volume – 3.5 / 5.5 ml
  • Decoupled base
  • One or two spirals
  • Adjustable bottom airflow

Now It’s Available :

Coilart Mage RTA V2

Hot Sale Recommendation:

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

Innokin EQ review

With this EQ, the brand explores a more vigorous vape, on the basis of an innovation: to use in a pod different coils, the plexus, constituted not by a wire, but by a grid. The result is interesting.

Is it really a pod?

Obviously yes: it has the format (8.8 cm) and the battery (800 mAh). Note aside that its finishes are good, and that its matt coating does not take fingerprints.

As on the other pods, the fillable tank contains the coilhead and slides on the battery.

To fill this tank, before inserting it, it is necessary to turn its lower part, to discover 2 holes. The tank is in two parts, to be filled separately. A USB plug recharges the battery in about an hour.

Before using it, you should remove the cap, pressing it on the side, to uncover a tip wide enough, but perfectly ergonomic for the lips. Vapor is inhaled indirectly, as on all pods.

Okay, so it’s a pod. How is it different?

While most pods do not have a button and only one operating mode, the EQ is not automatic, it has a firing button.

This button has 3 functions: firing to vape, switching on or off the pod in three clicks, and choosing between two powers: 13.5 and 15.5 W. To change the power, first switch off the pod, then press and hold the button until the LED changes colour : white = 13.5 W, red = 15.5 W. The difference seems small, but it is sensitive, we will come back to it.

But the main difference is not visible: it is the nature of the integrated coil in the tank. It uses a grid rather than a wire, promising more flavors and throat hit. And indeed, its hit is powerful, very powerful, while the defect of pods is often to offer a slightly weak hit.

Concerning flavours and vapor production, the grid does not seem to me to really change the deal compared to good classic pods: they are in the good average.
In the end, the difference is that the EQ is at the level of its best competitors, but more “fished”, much more fished.

Innokin also announces a longer coil life. I can’t confirm it yet, I don’t have enough vaper to rinse the resistance, but it seems right that in other systems, mesh or grid coils last much longer than their wire counterparts.

Focus On For More Vape Start Kit.

Technical review

The EQ is delivered in a white box, with a cable and instructions for use. There is no spare tank in the pack, they are sold separately, in individual boxes (in the foreground).

Essential features of the Innokin EQ Pod

  • Beginner kit type of equipment
  • Dimensions mod 88 mm x 35 mm x 15 mm
  • Battery 800 mAh
  • USB Charging
  • Tank capacity 2 ml
  • Operating range 13.5 or 15.5 W
  • Kit weight 53 g
  • Small technical observations

Strong vape

These grids are very thin, so they heat faster and over a larger area than regular wires, so they bring a stronger vape. Their resistance value is also lower, which increases the power, which must be controlled here. With a conventional 3.7 V battery, we would have a power of 28 W, which would be far too much for this kind of MTL vape style. Innokin has therefore equipped its pod with a battery and electronics that produces 2.6 V for 13.5 W power, or 2.8 V for 15.5 W.

To simplify, the EQ has more guts because it consumes more energy, and the 800 mAh battery will not last as long as on a conventional pod. We can count on 130 to 160 puffs, the equivalent of 10 to 15 cigarettes. This might not seem enough to last a day with a classic pod. But the strenght of it makes that one needs less puffs to satisfy its needs in nicotine, at equal rate in the liquid.

To sum up: if you like the hit and you want to vape harder but less often, it’s the pod you need! According to my personal experience, with a liquid nicotine salts dosed at 20 mg, you get your dose in 5 puffs with EQ, against 12 on average for a cigarette, and 10 to 15 with a conventional pod. In short, this pod is not only innovative, it is excellent, on one condition: love and support an important hit.

Little snide observation

Despite the obvious quality of design and production of this pod, Innokin forgot something very silly. When changing the vape power, the LED changes from red to white, or vice versa. But when you go, the button lights up white, to confirm the firing, whatever the power chosen. To know it, switch the pod off and on again: when it is switched on, the LED flashes white or red depending on the current power. It’s not a hindrance, just a little detail forgotten.

In Summary

This pod is excellent, and the only one of its kind to my knowledge by the strength of its hit. This can also be a flaw: it will not suit those who like a sweet vape, that’s what costs him half a point. It’s a strong pod, which can satisfy those who love the hit and need to find satiety quickly during a short break.

Innokin Endura T20-S Review – Endure

The Innokin Endura T20-S is a starter kit designed for mouth-to-lung vaping. It features a one-button design, a 1500mAh battery, and a 2ml tank. The kit includes two 0.8ohm coils, but there is no power flexibility or airflow control. Let’s see how it performs.

Review: Innokin Endura T20-S

Innokin Endura T20-S Review

Manufacturing Quality

The manufacturing quality of the Innokin Endura T20-S is average. While it feels solid and durable, the design is unoriginal and lacking in features – even if it is built with beginners in mind.

The only flexibility you have with this kit is choosing what liquid to fill the tank with. There is only one type of coil included, there isn’t any airflow, and you can’t adjust the power.

That means all you do is turn it on and take a draw. While beginners may like not having to mess around with power levels, even a complete novice might benefit from airflow control.

Innokin Endura T20-S Available Colors

The 1500mAh battery is pretty big for this style of vape, but you better get ready to charge it forever. When I use an internal battery mod, I prefer it to have 2A charging. This is currently the fastest type of micro-USB charging available in mods, at least to my knowledge. The next step down is 1A, and some have .8A. This only has .5A charging!

Another thing worth noting is that the coils are made from kanthal. Coil material is something that can be the cause of very heated debates, but I greatly prefer stainless steel over kanthal because it gives better flavor.

Flavor Quality

The vapor quality produced by this kit is average. It’s designed for mouth-to-lung vaping and maxes out at 18W with a full charge, so the vapor production is on the low side. This is arguably a good thing for beginners though.

The coils deliver good flavor despite being made from kanthal, although there are much better options out there. If you don’t have anything to compare them too, you won’t even realize that the flavor could be better – so I wouldn’t worry too much about this if you are looking for a first vape.

Vapor quality is a subjective thing – you may really enjoy vapor that I greatly dislike – and that’s exactly why flexibility is important. It allows you to dial in the experience to your exact preferences. With this, you are stuck with the stock configuration.

Focus On For More Vape Start Kit.

Power Flexibility

This doesn’t have any power flexibility at all. Like I mentioned above, the max wattage output is 18W. You’ll only achieve that with a full charge though. With this vape, the voltage will drop with the battery charge. Lower voltage means less watts, which also means less vapor.

The button on this has a backlight that indicates the charge level. Green means you are good to go, yellow means you’re around halfway, and red means you need to charge it ASAP. In my experience, you should charge it shortly after the light turns yellow because the performance will drop off quickly.

Both of the coils included with the same (0.8ohm), but there is supposed to be at least one other option available rated at 1.5ohm. I did not actually try it though because it doesn’t come in the kit.

Innokin Endura T20-S on back

Ease of Use

Considering there are no settings on this at all, it’s extremely easy to use. You just fill up the tank, turn it on by clicking the button five times, then click and hold the button to take a draw.

To fill the tank, you have to twist the top off. Make sure you only put juice around the outside and not in the center hole.

You have to twist the tank off to access the coil. Only changing the coil when the tank is empty, otherwise you’ll have a mess on your hands.


The portability of this is good. The size and shape make it comfortable to carry in your pocket, and the 1500mAh is enough to last a while without needing charged.

If you are replacing a smoking habit and this will be your only vape, you may end up having to charge this in the middle of the day.

Innokin Endura T20-S with tank detached

 Overall Experience

I don’t think the Innokin Endura T20-S is a good purchase.

If you are a beginner, you may be tempted by the simplicity. But it’s actually not the easiest to use vape setup you can get, and it lacks the versatility other vapes offer without being any more difficult.

Besides the simplicity, the biggest attraction is probably the price. But even on this front, there are cheaper vapes out there and you shouldn’t let a desire to save money prevent you from getting a vape you’ll actually enjoy.

Now It’s Available :

Innokin Endura T20 2ml AIO Starter Kit

Hot Sale Recommendation:

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

Aspire Pockex AIO Kit Review

Introduction – The Pockex AIO From Aspire

Of all the vaping companies out there I’m pretty sure the vast majority of you have at one time or another used an Aspire product.aspire pockex review

They do indeed cater to the mass vaping market with a whole range of fantastic devices and tanks and let’s face it you can probably count on one hand Aspire products that haven’t been well received.

So is their latest MTL [mouth to lung] device, the delightfully named the Aspire Pockex, one to attract both new and seasoned vapers?

Let’s delve down and have a closer look.

In the Box

The packaging is the usual fayre from Aspire – functional – black and everything packed into a relatively small space.

  • X1 Pockex AIO device
  • X2 O.6 ohm 316l atomizers
  • X1 USB cable
  • X1 User manual
  • X1 Warranty Card

I’m glad they supplied a spare coil because whilst taking the ‘in hand’ photos I hit the fire button to be greeted by the smell of burning cotton – so do fill your device before you hit the fire button! And give the juice a few minutes to soak into the cotton too!

You’d really think I’d have learned by now lol.Aspire Pockex vape pen starter kit

Pockex Specs

  • Diameter: 19.7mm
  • Length: 117mm

As I’ve said before there’s not a lot you can do to make a pen style vaping device look any different than what it is!

But the Aspire Pockex is very small – perfect for stealth vaping – and extremely light.Aspire Pockex Kit Contents

You’re looking at a simple top fill design with none-adjustable top airflow.

Aspire says the design is 100% leak proof and in the few days I’ve been vaping with it I can say that is indeed the case.

However it’s the changing of the coils that impresses the most. For once there’s no need to drain out your e-liquid when swapping them out as they simply screw into the top cap – a real bonus for me!

The tank is TPD compliant 2mls [booo!] which means plenty of refilling for heavy vapers – however filling is easy enough.

You can either slide off the stainless steel sheath and fill or [as I found out to my cost] keep the sheath on [always advisable lol] so you can see the unobtrusive ‘max fill line’.Pockex sheath tank

Go above that and you will flood e-liquid all over your fingers and more importantly the Pockex.

Design and Build Quality

As you might expect from vaping giant Aspire the build is first rate with silky smooth connections.aspire-pockex-in-review

However I couldn’t help but notice a quite loud rattle from the fire button.

Not a big issue but one I felt I needed to point out as it is also loose on the touch – which might suggest issues down the line.

But then again you’re going to be vaping on it not trying out for the percussion section of your local orchestra.

However the design is music to a design lovers ears. The funky looking cut outs on the sheath add a touch of class and the removable sheath itself is a nice protective touch.Aspire Pockex Vape Parts

The overall brushed stainless steel is smart with the non-removable black slim line Delrin drip tip the same size as a cigarette.

Overall the Aspire Pockex is a very nice looking piece of vaping kit slightly wider but shorter than the Bic biro I jotted down my notes with.

So yeah it will fit in your pocket – purse or handbag with ease.

Focus On For Best Vape Tanks.

Operating The Pockex Vape Pen

First up the operating.

It’s a 1500mah battery and fully charged I got almost two full days vaping out of this little beauty.

Five rapid clicks on the fire button turns you on and five off. You do get a bit of a disco light effect with blue LED flashes telling you it’s on and pink telling you it’s off.

The Pockex also lets you know how much power you have in your battery.

Pressing the fire button and seeing blue means you have over 30% power. When it’s less than 30% the light glows pink so time to charge up.Aspire Pockex Parts

The Aspire Pockex charges from the base and the smallish cable supplied allows pass through vaping [able to vape whilst charging].

As I’ve already mentioned mine came with enough juice in the battery to fire up – however I burned the coil as I hadn’t put any e-juice in – so be careful you don’t do the same.

Vaping Safely With in Built protection

As with any of the newer vaping devices safety features are built into the Pockex meaning you can vape safe.

After 10 seconds of use the device will stop firing – this is important if it’s in your pocket or bag and simply means there’s no chance of it dry burning.

It’s the same with any possible short circuit. As soon as the Pockex detects that most rare of events it simply cuts out.

You should never leave any of your vaping devices unattended whilst charging – however the Pockex once full charged once again cuts out automatically.

There’s not a lot more Aspire could have done to make the Pockex as safe as houses so well done them!

How Does The Aspire Pockex Perform?

As I’ve already mentioned filling is an absolute doddle. Simply unscrew the top cap and drip your 2ml of e-liquid into the tank – using of course the max fill line as your guide.How To Fill the Aspire pockex tank

I let my Honeywood e-liquid from Red Vapes  soak in for a good ten minutes and was absolutely delighted with the throat hit – flavour and vapour.Aspire Pockex tank top fill

I’ve always liked Aspire coils and tanks and the Pockex coils or Nautilus X U-Tech as they are also called – gave me a superb taste profile and throat hit.

The vapour was about the same as the smoke you get from a cigarette which when it comes to beginners and regular MTL vapers is all you really need.

Aspire Pockex U Coil swap

Is The Pockex U-Tec Coil Compatible With The Aspire Nautilus X Tank?

According to Aspire. For the Pockex battery, you can only use the 0.6 ohm coil as the vape pen has been designed for use with this.

This would say to me that the battery is a fixed wattage specifically for sub ohm vaping.

If you were to use the 1.8 Ohm coils, they would likely receive too much power/wattage from the Pockex battery which would in turn burn the 1.8Ohm coils.

But.. the 0.6 ohm coil is compatible, and can be used with the Nautilus X tank. Which is a great option for those wanting to try a sub ohm vape from the Nautilus X tank..

What I like

I like the design – size and weight of the Aspire Pockex and as vaping starter kits go it’s got it all.

This little guy does it all for you – all you need to do is fill and vape.

I love the fact you can swap coils without draining your e-liquid and you do great a superb taste and throat hit.

For me Aspire has brought out a great little device that will appeal to newbies and regular MTL vapers and at the bargain price you are getting a good device for your hard earned cash.

What I Don’t Like

I can’t really find fault with the Pockex but if pushed I’d maybe say the rattle from the fire button is a little annoying should you be a vape ‘n shaker.

Final Review Verdict

If I lost it via a hole in my pocket or man bag would I replace it?

Given its price is pretty much pocket change I definitely would.


  • Great taste
  • Good vapor
  • Superb safety features
  • Pass through vaping
  • Simple to use
  • Top fill
  • Clean coil swap
  • Battery lasts an age


  • Fire button loose and rattles

Now It’s Available :

Aspire Pocke X AIO Kit

Hot Sale Recommendation:

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

Aspire Nautilus 2 review

Aspire Nautilus 2

I think it’s fair to say that the original Nautilus was a very popular and widely used atomizer. Aspire followed that success by releasing the Mini Nautilus which featured the strengths of its predecessor only in a much more compact design.

We have lately seen the release of the Nautilus X and now the Nautilus 2 is here at last and people are understandably excited but given the fact that Aspire has had to ensure that the tank falls in line with the EU’s TPD regulations you may be worried that has reduced the appeal and have held off from purchasing. Given the popularity of the original tank you might also wonder if this is truly a worthy successor.

Those are both very valid reasons to wait for reviews so without further delay let’s cut right to it and see exactly what the new Nautilus 2 has to offer you!

Aspire Nautilus 2 features

  • 53mm Height
  • 22mm Diameter
  • 2ml Capacity
  • Stainless Steel and Pyrex Glass Construction
  • Adjustable Airflow

What’s in the box?

  • 1x Nautilus 2 Tank
  • 1x Pre-installed 0.7ohm Coil
  • 1x Spare Coil (1.8ohm)
  • 1x Spare Glass Tube
  • 8x O-rings
  • 1x User Manual
  • 1x Warning Card
  • 1x Stainless Steel Drip Tip
  • 1x Delrin Drip Tip

In my opinion the packaging and contents are excellent and thankfully the tank includes a choice of two coils suited to either a MTL or a Sub Ohm experience. The further inclusion of a nicely written manual and warning cards is also worth mentioning since it caters well to a new vaper. The inclusion of two different drip tips is definitely a nice bonus!

Aspire Nautilus 2 styling and build quality

The Nautilus 2 is a highly compact atomizer which stands 53mm in height. The design is beautiful featuring a brushed Stainless Steel finish and it looks truly elegant!

The tank features a domed top and this helps to ensure improved flavour. Given that the overall size of the chimney has been reduced due to the TPD compliant 2ml capacity I felt that also helped to promote better flavour. The construction is superb and the individual parts feel weighty and durable. Everything fits together extremely well and there are no unsightly gaps or roughly machined threads to be found.

Keeping ease of use in mind Aspire have kept the Nautilus 2’s individual parts to a minimum and the tank consists of a Stainless Steel outer housing which also works as a shield to prevent the glass from being accidentally damaged, a Pyrex glass tube, a base to which your coil is fitted and finally a choice of two drip tips; either a Stainless Steel or a Delrin one.

You can of course happily use your own drip tips since the Nautilus 2 features a standard 510 drip tip fitting.


The airflow is fully adjustable and consists of five individual holes that become progressively smaller. The airflow adjustment works well but straight out of the box I found it a touch stiff but if you use a little bit of juice or some VG to lubricate it you are unlikely to run into further problems.

Unlike the Mini Nautilus the Nautilus 2 airflow is quite varied and at its most open caters to a slightly restrictive lung inhale style or vaping. Closing down the airflow the vape becomes progressively more restrictive and very tight when limited to the single smallest hole so it will be absolutely ideal for anyone who enjoys a mouth to lung vape.

Focus On For More Vape Tank.

Ease of use

Installing coils is simple and fully detailed in the manual but thankfully the 0.7ohm coil is pre-installed so you can get vaping almost right away. Filling this tank is perhaps a little unusual because it is only top filling in a very general kind of way and the Nautilus 2 has no dedicated lid or top cap.

What you have to do is unscrew the Stainless Steel outer shell and this reveals the base with the glass tube fitted to it. Remember to keep the tank upright and you can leave it attached to your device if you wish. You then simply squeeze in juice to the indicate fill level before refitting the metal shell. You may need to press down slightly before tightening and take care not to over tighten it because I found it can stick on occasion. Aspire state that the tank holds 2ml of juice but in actual fact given that you don’t want to pour two much juice in there or the pressure will force it down the chimney and out of the air holes you are actually limited to about 1.8ml capacity.

How does it vape?

Given that the overall size of the tank is relatively short and compact you would expect flavour to be pretty decent and I am happy to report that it is absolutely on point and truly excellent no matter what juice you choose to use!

I have used Flavour Boss Mother’s Milk in it, Fallstreak Cirrus, a whole range of LDN LIQ E-Liquid and some Colonel Boom’s Lt. Ripley. I could find no fault at all with the experience I got from the Nautilus 2 coils. It made absolutely no difference whether I used 50/50, 70VG/30PG or 80VG/20PG liquids.

Vapour production when using the 0.7ohm coil is surprisingly good when the airflow is fully opened up and even though it is not excessive I am sure it will certainly satisfy most average users. Even if you don’t want to specifically use the 1.8ohm coil you can get an excellent mouth to lung experience with the 0.7ohm coil by heavily closing down the airflow to the point where it becomes a very tight and restrictive vape.

The 1.8ohm coil is a slightly different experience but will suit a mouth to lung user perfectly and thankfully also results in slower juice consumption. I personally thought the flavour from both coils was excellent but the 0.7ohm has superior flavour in my opinion and significantly greater vapour production as you would expect from a Sub Ohm coil.  The most noticeable difference is that the 0.7ohm tends to be a much warmer vape and is at its best around the 18-20W region but you can get a perfectly enjoyable vape at 14W if you prefer things to be a little cooler. The 1.8ohm coil on the other hand only needs between 7-9W of power which will result in far less battery drain should that be a concern.

I’ve been vaping the 0.7ohm coil heavily and it only just started to pack in after six days but keep in mind I am something of a serious chain vaper and you will likely get longer than that. I only have fitted the 1.8ohm coil for a short duration just to see how well it vapes and so I could provide a complete review but I would assume it will at least last a week or more if you are a more modest user.


While I personally have moved on from tanks that feature pre-made coils because I’m a tight Northerner and hate continually paying for them I still do have those occasional moments where I really cannot be bothered to wrap a coil and install it and I ideally prefer to have something to hand so I can just have a quick vape when I want to. I am pleased to say that much like my Nautilus Mini, the Nautilus 2 certainly fits that role ideally!

The 2ml capacity is a slight annoyance to me (as it is with all 2ml tanks) but then that’s the EU regulations for you and not Aspire’s fault but on the positive side of things I really don’t feel like I’m draining the juice ridiculously fast. Granted the 0.7ohm coil does get through the juice at a faster pace as you would expect but not as badly as many dual coil Sub Ohm tanks that have tried but in my opinion the 1.8ohm coil is pretty forgiving. Even though I do really enjoy the 0.7ohm coil vaping experience I think I would realistically stick to the 1.8ohm due to the benefits of less battery drain and lower juice consumption but I do think it’s really nice that Aspire have given users and a choice and the two included coils mean you can find out exactly which experience suits you best!

I can honestly find only two negatives with the Nautilus 2 and both of them are very minor. Ideally I would have preferred a dedicated top filling system because the current design causes the metal shell to stick if you accidentally over tighten it and the airflow ring can be a little stiff when you first use the product but that is quickly overcome by a little lubrication.

However despite that I think it is an awesome tank and its real advantages are that it vapes exactly like the Mini Nautilus but with now with a wider variety of airflow options, better flavour, improved vapour production when using the 0.7ohm coil and an elegant redesigned shell. In short I absolutely love this tank and find myself reaching for it often!

This is a truly superb offering from Aspire and if you are new to vaping or an existing fan of the Nautilus or just someone who wants an atomizer that also caters to a good mouth to lung experience then this is without a doubt something you should definitely pick up!

Now It’s Available :

Aspire Nautilus X Compact MTL Tank

Hot Sale Recommendation:

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

Wismec CB-80 Kit Review – Great For All Vapers!

Introduction To The CB-80 Kit by Wismec

Today we are looking at the Wismec CB-80 Kit which comprises of the CB-80 mod and the Amor NS Pro stock coil tank.

The CB-80 is a single 18650, 80w max device that has various firing modes including VW, Bypass and TC modes.Wismec-CB80-FrontThe Amor NS Pro Tank is a 2ml capacity, 22mm atomiser that can take a variety of coils. Two of which are included in the kit which are the WS04 MTL and WS01 Triple coil.Wismec-CB80-Side2

There are 5 colours to choose from, but today we will be looking at the rainbow/‘dazziling’ version.

This device was sent to us for the purposes of this review. As always, my opinions are honest and my own.

Wismec CB 80 Video Review


What’s In The Box


  • Wismec CB-80 Mod
  • Amor NS Pro tank
  • WS atomizer heads
  • USB cable
  • Spare parts
  • User manuals


  • Battery – 1 x 18650
  • Tank capacity – 2ml
  • Atomizer resistance – 1.3ohm / 0.2ohm
  • Output wattage – 1-80W
  • Dimensions – 126mm x 36.4mm x 22.6mm
  • Assembled weight exc. packaging (approx.) – 132g

Wismec CB-80 Kit Build Quality & Design

Amor NS Pro Tank

The Drip Tip:

The drip tip is 510 sized and in the popular ‘cobra resin’ or honeycomb style.Amor-NS-Pro-Full2

Top Fill Port:

The Amor NS Pro Tank is top fill, and to access the top fill part, just locate the little arrow.Amor-NS-Pro-TF-ClosedThen push the top of the tank sideways to reveal the port.Amor-NS-Pro-TF-Open

The Airflow Base:

On the base we have the airflow control ring. There is only one hole, but it provides perfect airflow for both direct lung and mouth to lung vaping. For direct lung I would recommend using the open airflow slot, and with mouth to lung, either of the airflow settings can be used depending on how tight you like your draw.Amor-NS-Pro-Airflow

Amor NS Pro Tank – Overall:

Overall, the construction and look of this tank isn’t too bad. The only thing that pokes out is the size of the top fill hole. It could be a bit bigger. Other than that, no complaints!

The Wismec CB-80 Mod:

At the top of the device we have the 510 connector that is located toward the back side of the device. It has stainless steel threading and a 510 pin with a nice amount of throw to it! I would say you could fit 22mm atomisers on here, maximum.Wismec-CB80-TopWorking our way to the front of the CB-80, we have a square fire button that is slightly spongy, but does have a nice click to it.

Either side of the fire button, there is a little LED that lights up when firing the mod. I think that it’s a nice little touch and doesn’t stick out like a sore thumb, nor does it light up the room when vaping.CB80-LightsBelow that we have the screen which is nicely hidden behind some smoked glass.Wismec-CB80-Screen-OffBut once lit up, it is nice and easy to read and navigate.Wismec-CB80-Screen-OnUnderneath the screen are the + & – buttons as well as the micro USB charge port.Wismec-CB80-ButtonsOn either side of the device we have the Wismec branding on the metal.Wismec-CB80-FullAt the back of the CB-80 there is a plastic grip with a honeycomb pattern on it. I think it looks awesome!Wismec-CB80-Back-CloseAt the base of the device we have the battery door that has the usual markings on it as well as venting holes in the event of a battery shorting out.Wismec-CB80-Battery-DoorOn the inside of the battery door we have the negative contact which is clearly marked.Wismec-CB80-Battery-Door-Open

Focus On For More Vape Kits.   

The Wismec CB-80 Mod – Overall:

Overall, The CB-80 is a lovely looking vape mod. All the buttons are in the right place and have a good feel to them. The screen is also very easy to read and navigate, which is a bonus, especially if you are new to vaping and are unsure about what you are doing. One thing that annoys me about the rainbow finish is that its a bloody fingerprint magnet!BC80-In-Hand

Amor NS Pro Tank Coil Performance

WS01 Triple 0.2Ω Coil (40-80w)

The WS01 Triple is the direct lung coil included in the kit and I have found that it is best at anywhere between 48w and 50w for me. It offers the right combination of flavour and clouds as well as extending that battery life a little more.WS01-Coil-SideEven at wattages around 60 the flavour is pretty good, but I feel that the coils are struggling to wick as efficiently as they do at lower wattages.WS01-Coil-Top

WS04 MTL 1.3Ω Coil (8-14w)

The WS04 MTL is the mouth to lung coil that is included with the CB-80 Kit and from a visual perspective, it has reduced wicking holes and a smaller diameter coil in the centre.WS04-Coil-SideI have found that wattages around 10-12w was best for me. At higher wattages, I prefer to have the airflow wide open, as I feel that this gives better flavour. But at anything below 10w, you’ll be fine on either of the airflow options.WS04-Coil-Top


  • Looks and feels good
  • Lightweight
  • Well designed
  • Good flavour
  • Appeals to MTL and DL users


  • Flavour diminishes at high wattage (WS01 Coil)
  • Top fill hole a little small
  • Device gets warm when chain vaping

Final Review Verdict

To round things off, I would say that the Wismec CB-80 is a great little kit for all types of vapers, but I feel that it is more aimed towards the new vapers due to it including MTL and DL coils. But, if you enjoy MTL or DL vaping, its pretty damn good!

Not really any major flaws or complaints about the CB-80 Kit. Just the odd bit and bob that I feel could have been done differently. Nice one Wismec!

Now It’s Available :

Wismec CB-80 with Amor NS Pro kit

 Hot Sale Recommendation:

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit



DeucesJack:What’s up everyone? DeucesJack at Yeah, I know we’ve been getting a lot of pods lately. Today, I got another pod system for you. I got the Wismec Motiv 2 second rendition, comes with 2 pods. Holds 3mls, 3 mls of Nic salt. I like that. Plug stays in, stays on the pod when you fill it. That’s a pro for sure.

Let’s cut downlow. Let me show you how to fill this thing up. I’m going to take a quick tour around the mod. I’ll show you the finish then we’re going to come back on top. We’re going to vape on it, we’ll talk about it, cons, pros and we’re out of here. See you downlow.


  • 1 MOTIV 2 Battery
  • 1 MOTIV 2 Pod Cartridge
  • 1 USB Cable
  • 1 User Manual

Alright everyone, welcome to the downlow portion of this video. Today, we’re going over the Wismec Motiv 2. As you can see I have a sample packaging. I don’t believe this is out just about yet. We got some social media on the box over there. A little bit of Wismec branding. On the back, tells you what we get. we get a Motiv 2 battery, USB cable, two Motiv 2 cartridges, a user manual, maximum output is 10W. There is your security check.

Wismec Motiv 2 Pod System Review

Let’s check this thing out. A little bit more Wismec branding. Let’s see what we got here. Here is your instruction manual. Goes over the light system, from 16 to 100 percent. The color of the LED is green. From 6 to 15 percent it’s yellow. Below 5 percent it’s red. So when you see yellow, basically time to start charging.

Here is the battery. We’re going to put that to the side for a second. Here is your pod. I’m going to put that to the side too because I’m going to show you how to fill it. And here is your spare pod. You also get a rather nice USB charging cable.


Here is the pod system. Nice gold plating over here. Check this out. See this little knob right here? They did a nice job making that little knob there so you can get your fingernail in there and get it off. You just kind of pull it up and pull it to the side and that’s how you fill. Once you’re done, see, there’s an air hole in right there and that’s where you fill. You want to make sure you get that little knob in the air hole first and then you push the big knob in. There you go.

Wismec Motiv 2 Pod System Review

I don’t know why they make these pods so dark. Kind of hard to see your juice level unless you hold it up to the light. Here is the battery part of the mod, beautiful paint job, nice and sparkly. Has that pearl finish to it. A little bit of subtle Wismec branding over here.

Wismec Motiv 2 Pod System Review

Inside, we have two gold-plated contacts that coincide with the contacts on the pod system itself. That’s a magnet right there so it kind of locks it in over here as well. On the back is where you’ll find your LED. I got a little bit of a ding right there. I’ve been using this thing a lot. It might have been in my pocket with some keys or something like that. You’ll also have some Motiv 2 branding over here. Nothing on the bottom. On the side is where you’ll find your micro USB port right there. So glad it’s a micro USB and not a proprietary charger. When you want to load this thing up, you simply take your pod and snap it in and that’s it.

Wismec Motiv 2 Pod System Review

On the pod, it’s very comfortable. Here is your draw hole right here. This side has kind of a curvature to it and then this side is much more flat. I don’t know if you can see that. It’s kind of flat like almost like- it’s not as curvy as this side. I don’t know if that’s actually showing up on camera but this side is curvy, this side is flat. So it makes it really really comfortable to put this thing in your mouth, it really does.

Wismec Motiv 2 Pod System Review

That’s it. that’s really all I got for you guys, on this one. let’s cut back on top. let’s vape on it. We’ll talk about it, cons, pros and then we’re out of here. See back on top.

Focus On For More Vape Kits.   


Alright everyone, we’re back on top with the Wismec Motiv 2 and I got to tell you, man. I love this little thing. I really do. 500 mAh internal battery. Weighs 58 grams so it’s really pocketable. It’s got a nice paint job on it. Almost like a pearlized paint. Really really nice, great capacity, 3mls. Drawer activated, LED battery indicator. I love the mouthpiece. The mouthpiece on this thing with the part that you put in your mouth, really really comfortable with that flat side thing going on that I showed you downlow. Has up to 10W of power. 3.5V constant voltage. I got to tell you, man. This thing hits nice. I get a really nice satisfying nic hit off of this thing. I’ve thoroughly been enjoying it. It’s one of my favorite pod systems right now. Very very impressed.

Wismec Motiv 2 Pod System Review

Let’s get into the cons and pros.


First con is going to be when you refill it, it does gurgle a little bit on the refill. Goes away after about 4 or 5 pulls but that gurgle is there. So don’t be scared when you get it but I just want to tell you about it.

Next con is going to be, there’s two kinds of pods, ok? You can get a TPD 2ml pod or a 3ml pod. But there’s no listing on what ohms the coils are. So I would like to see them come out with different pods with different ohms in the pod.

I think that would be really cool for something like this. I’d like to know what I’m ohming out at on this pod, Wismec so make sure you put that on your packaging because I can’t find it anywhere. That’s going to be a con too.


Let’s get into the pros. This thing hits nice and fast for a pod system. There’s no ramp up on this thing. It hits right away. Look, it’s nice.

It’s got nice flavor. It’s got a great finish on it. The paint is just superb. Awesome capacity. It’s 3ml capacity, that’s a pro. It’s a loose mouth to lung type of draw, That’s the type of airflow you’re going to get from this. Some people aren’t going to like it but I like it so I’m giving it a pro.

Very pocketable, shirt pocket, jacket pocket, jeans pocket, you’re good to go. Stealth vape, look at it, man. Just disappears in your hand. Kind of cool, man. I like that. You can definitely have this in your hand some place when you’re not supposed to and just take a quick hit off of it. Nobody will know.

Wismec Motiv 2 Pod System Review

I like that it’s got a three-color battery indicator LED. That’s cool.

It’s very comfortable, comfortable in the hand, comfortable to hold. Has a nice smooth finish to it. I like that. We’re going to give them a pro for that.

Easy to use because it’s drawer activated, pro.

Big pro, two pods included. Good on you, Wismec. You guys are listening. I like that. Awesome job with that.

Wismec Motiv 2 Pod System Review

Price point. 25 bucks and you get two pods. That’s awesome, man. That’s fantastic. Go out and get it. Believe me. You can thank me later at that price point. Pods run around $3 apiece. I don’t know if they’re sold singly or in a box like three in a pack. I only saw them on a Chinese website and it said in one account, I think it was $3.25. Hopefully, Wismec will change that and come out with like a three or five pack of these things. I think that would be a lot better.

The other pro I’m going to give it is pod longevity. So far, I’m on my fifth refill on this. I have no significant loss of flavor or vapor production. That’s a pro.

Joytech eGo ONE TFTA – another one in dogonka

eGo is the name that causes not the most pleasant associations for most parischikov, but Joytech still decided to continue to develop this series of devices model  ONE TFTA .

Joytech eGo ONE TFTA

Focus On For More Vape Kits.   

Joytech eGo ONE TFTA

The design of the battery box in the cell looks pretty nice, and the color scheme presented in five colors (white and black, black and gray, black and red, yellow and black, blue and black) only adds to the appeal.

Joytech eGo ONE TFTA design

When developing  Joytech eGo ONE TFTA, the  manufacturer made everything so that the device was disposable. The base is integrated with the battery pack, which does not allow changing the atomizer (at the same time the connection disappears, where the liquid can get into). The mouthpiece is not inserted into the top cover like everyone else (for example, the 510th connector), but is put on the tube with sealing rings like the  Aspire Cleito EXO .

Joytech eGo ONE TFTA

More recently, a box mod of the same line, all in one Joytech eGo AIO ProBox, was releasedand ONE TFTA  installed exactly the same card allowing it to work in two modes: direct output (like a mechanical mod) and constant output voltage. To switch between them, use the Fire button. Also built-in protection against overheating, too low and high battery charge.

Refueling and blowing Joytech eGo ONE TFTA

To fill the tank  Joytech eGo ONE TFTA  with a capacity of only 2 ml you need to unscrew the top cover and pour the liquid into one of the two round holes at the edges. Air is also drawn from above. Such a decision is most likely due to the reluctance to do blowout slots in the battery pack, although  this is exactly the case with  SMOK VAPE PEN Plus .

Evaporator Joytech eGo ONE TFTA

Unfortunately, the manufacturer did not suffer from the development of evaporators for  Joytech eGo ONE TFTA  and did not leave a choice. The only option is a stainless steel coil with a resistance of 0.6 ohms, and the allowable power range is 15-30 watts.


  • Height: 120.5 mm;
  • Diameter: 22.0 mm;
  • Volume: 2 ml;
  • Refueling: top;
  • Airflow: upper;
  • Battery: non-removable, 2300 mAh;
  • Weight: 117 grams (including atomizer);
  • Port: micro USB, for charging the battery;
  • Color: white-black, black-gray, black-red, yellow-black, blue-black;


  • Joytech eGo ONE TFTA;
  • Two evaporators ProCL 0.6 Ohm;
  • USB cable;
  • Instruction;
  • Coupon with warnings;
  • Spare parts.

Now It’s Available :

Joyetech EGo ONE TFTA 2300mAh kit

 Hot Sale Recommendation:

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

Sigelei T4 Resin Sub Ohm Tank – total recycling

Today I will start your day not with good news. No, everything is good – just somehow gray and boring. Although elected such news may please. By elected, I mean not those who were chosen by a special council of planet Earth or appointed by fate to save our galaxy from invasion by foreign invaders. But very different – simple fans of the resin material that has gained popularity.

For you, the company Sigelei tried from the heart. They thought, they thought – where else to push this multicolored plastic, and here at one of the brainstorming, one of the developers exclaimed – idea! So, it was decided to replace the usual glass of the tank with “glass” (I will still call it that way) from Resign.

And they got the following – Sigelei T4 Resin Sub Ohm Tank . “Oil Painting”.
Sigelei T4 Resin Sub Ohm Tank -
It turned out just some kind of a fairy tale))) I hope you will take my sarcasm with humor, no offense to the fans of the sigil.
By the way, foty squeezed, so satisfied with the render. Although in the photo live it would not hurt to assess the “scale of the tragedy”, so to speak.

Case Material: stainless steel + resin
atomizer type: Sealed
Evaporators: SM2-H / SM2 / SM4 / SM6
Volume: 2.5ml
Diameter: 24mm
Height: 51mm with Drip type
connector: 510, pin gilded
Weight: unknown
color: black, steel
Sigelei T4 Resin Sub Ohm Tank -
– T4 Resin Sub Ohm Tank
– replaceable evaporators 2pcs SM2-H (one is preinstalled)
– spare origings
– spare glass
– user manual

Focus On For More Vape Tank.
Design – well, that design – you can see everything. If you do not take into account the full “recycling” of the device, then our hero is not particularly different even from his fellows on the shelf, not to mention the proposals of competitors. In form, we have a standard case, except that a drip type with a decent exhaust pipe rises above it. Appearance to judge does not make sense, because he is an amateur – here or yes or no. I have a distinct no.
Sigelei T4 Resin Sub Ohm Tank -
Refueling tank top. Drip type removable. The capacity is frankly small, despite the impressive height and diameter. Replaceable evaporators that feed our “plastic predator” are the same. We have already seen them, we know them, and some even probably tried.
Sigelei T4 Resin Sub Ohm Tank -
The evaporators are blown from below, at the base of the tank there is a turning ring with notches for adjusting the air supply.
Sigelei T4 Resin Sub Ohm Tank -
It is gratifying that in the kit is a spare, but rather a replaceable glass. And here it looks like a usual way for us – it is transparent glass.
Sigelei T4 Resin Sub Ohm Tank -
Price $ 30 – for it, and even so many dollars … no, thank you.
Sigelei T4 Resin Sub Ohm Tank -
Advantages / disadvantages
+ design (for lovers)
– price
Sigelei T4 Resin Sub Ohm Tank -

Now It’s Available :Sigelei T4 Resin Sub Ohm Tank Atomizer

Hot Sale Recommendation:

Hellvape Dead Rabbit RTA

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

smoant naboo

Hellvape ReBirth RDA

Sigelei DP tank – Overview

Known to every self-respecting vaper manufacturer Sigelei, released another unattended tank. Rather, it is possible to make it serviced, but for this it is necessary to separately purchase an RBA base for one helix, By the way, visually and constructively, it resembles a base from kanger for a sub mini tank.

So, the new Sigelei DP tank , another of many …
Sigelei DP tank - expensive and no ...
Case material: stainless steel
Atomizer type: TANK (RBA base sold separately)
Evaporator: SM2-H / SM2 / SM4 / SM6 / RBA
Capacity: 3.8ml
Diameter: 24.8mm
Dimensions: 51mm with Driptyp
Connector: 510, brass pin, silver Plated
Weight: unknown
Color: black, steel

Complete set
– DP tank
– the single-spiral replaceable evaporator (preinstalled)
– spare origings
– user manual

Design, here is what to say. Everything usually, in the best traditions, no one wants to bother, naturally. There are probably hundreds of such tanks. Here, as they say, someone will sink into the soul, although whom I cheat, well, to whom can such a thing sink into the soul. Such a “piece”, if only in a whale, is sold, or by ardent fans of “gray work”. I do not want to offend anyone, just … it comes out so)))
Sigelei DP tank - expensive and no ...
So, the drip-tip, as you most likely thought incorrectly, it is not the 810th, but the 510th – this is such a turn, just wide at the end. It is made of a dolrin, is held due to one oring installed in it.

We get down to the top cap. It is metallic and is fixed with a threaded joint, the thread is not “long”. The producer did not take any risks, why …

So I’ll post a photo for you, and you yourself consider it, maybe you can see something. If anything, all claims to the manufacturer, but from me to them, as usual, hello.
Sigelei DP tank - expensive and no ...
Under the top cap is one hole for refueling. The rim rises, both around the mine, and along the “perimeter” – there should be no straits.
Sigelei DP tank - expensive and no ...
Capacity in 3.8 ml is a decent indicator, not for the sake of compactness is understandable.

Now for the evaporators. Replaceable evaporators SM2 for one helix, SM4 for two helix, SM6 for three helix are suitable. By the resistance of each, I will not orient you. Well, you understand someone hello …

The holes for the air intake are not the biggest, apparently, together with the 510th driptyp the manufacturer is trying to organize tight traction. Airflow, who did not guess – the bottom. Adjusting the air supply is a rotating ring, of course, without scratches. Upstairs there wasn’t, why would we do it downstairs then – is it logical? Of course … And then we’ll ruin the design with its smelly functionality …
Sigelei DP tank - expensive and no ...
Pin is silver-plated, stands out from the connector quite a bit, maybe it’s customizable, which I highly doubt.

Advantages / disadvantages
+ capacity
+ replaceable evaporators (variability)
– price

Now It’s Available :

Sigelei DP Subohm Tank 3.8ml

Hot Sale Recommendation:

Hellvape Dead Rabbit RTA

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

smoant naboo

Hellvape ReBirth RDA