FIRELUKE RTA Review–Huge Vapor and Cool Flavor!

Since 2017, the trend of Electronic Cigarettes becomes more and more weird. Dragon Ball RTA released by Fumytech was once jokingly called “ cucurbit flute”. Some vapers even match the  Dragon Ball RTA with Pokemen Mod,  making it a Calabash Brother Kit.

More interestingly, this weird atomizer performs pretty well both in vapor and flavor.

Coincidentally, Freemax focusing on huge-vapor finished RTA also released a ball-shaped Fireluke RTA. It’s called lantern atomizer by the vapers. It also performs excellently in taste and vapor, proving again the theory that “the weird is the excellent”.

In 2015, when the “TC” trend of electronic cigarettes just began, with its super huge vapor and good flavor, Starre Pro aroused high degree of attention among the vaping group.

In 2016, FreeMax released a new atomizer named Starre Pure with finished ceramic core, which shows excellent flavor.

With its abundant experience collected from huge-vapor finished atomizers, Freemax also shows its unique taste in research and development of finished atomizers.

In 2017, Freemax shows a brand new Fireluke RTA with RBA accessories. Any new highlights in the taste and vapor? Let’s see!

[Package]

Fireluke RTA adopts black paper box. There is printed with the picture and name of the atomizer and its background is a fire leopard. Below the picture, there is printed a motivational sentence: “FireLuke Never Limits Your Vaping ”

Besides the regulated packing list, anti-fake QR code, there is the color matching information–black, stainless steel and black resin, red resin, yellow resin, blue resin, green resin, and purple resin.

When you open the cover, the shape of Fireluke RTA is very similar to that of “Dragon Ball”. But its top and base are very different to those of “Dragon Ball”. The sample I tested is in resin purple.

 

 

When you open the pad at the bottom, you will see an inter-layer in the box where you can see cotton, screwdriver, accessory bag, spare glass tube and a pair of finished coils.

There is a “RBA Kit” inside of a little bottle. This also means FireLuke RTA is not only a finished tank, but can also be used as a RTA, which fits more for the habits of the experienced vapers.

There is another glass tube in the accessories which is not a spare one. It shows in a vase shape and has a different capacity as the pre-installed one.

Though they both adopt the shape of ball, the difference between the shapes of FireLuke RTA and Dragon Ball is quite big. The metaphor of “Lantern” is very visual.

The measurements of FireLuke RTA as below: 59mm long, 28mm diameter of the base, 32mm largest circle diameter of the glass tube.

The space inside of the “big-bell” tank are mostly occupied by the atomizer. In truth, the actual capacity of the tank is not as big as we imagined. The pre-installed tank has a capacity of 5ml and the spare tank has a capacity of 4ml.

[Structure]

Fireluke RTA can be completely disassembled into drip tip, top cap, glass tube, coil and the base. Its structure is quite simple for disassembling and cleaning.

The finished coil of FIRELUKE RTA adopts a vertical triple coil. It measures 31mm long and its atomizer reaches 18mm with a huge size.

The electrode at the base and the electrode of the finished atomizer are both processed with silver-plated technique, which can improve their stability and electroconductivity.

Since Smok released TFV series, the size of finished coil has stepped onto the road of “huge”. Such size can enlarge the space for atomizing and can contain more coils. Its diversified structure has an obvious effect on the flavor and vapor, but it will also improve the manufacturing cost and use cost of the users. It is really wasteful to just throw it away after using.

Good news is that Freemax includes a RBA kit in the pack. DIY vapers can set the data according to their own taste preference and can also lower the use cost.

The packing bottle of the kit can also used for storing the finished coil. In daily use, vapers can use the RBA kit. When going out, you can take with you a finished coil for urgent time. It avoids the inconvenience of carrying tool, cotton and heating coil.

There are differences between the RBA kit and the finished coil. The electrode of the RBA is a cylinder. It is processed with gold-plated technique and the inflow holes are set beside the electrode.

In the light of its structure, the RBA kit of FIRELUKE RTA is completely a RDA with bottom inflow system and dual-post and four-hole electrode.

The kit can be disassembled into two parts. When you unscrew the atomization tube, you can build the coil on the base. After you build the coil and install the atomization tube, you can use it for vaping.

The screws for fixing the coils are cross screws, which are more reliable than the hexagon screws.

After building the “Clapton dual-wire coils” in the package on the base, the resistance is roughly 0.15 Ω.

The liquid passage of FIRELUKE RTA is very different from the common ladder-styled passage. Deflecting the liquid into the space below the base then guiding it to the cotton. Such structure is just like building a “liquid tank” below the cotton which can ensure the speed and efficiency of the liquid.

Another advantage is that it’s very simple to process the cotton. Refer to the length between the coil and deflecting hole. Leave the cotton ends much longer and then plug it into the base and then adjust the cottons beside the coils to smooth the fiber. It’s so easy that even new vapers can handle it soon. As long as the cotton is enough to plug the deflecting hole, it will not have the problems of leakage or short supply.

Vaping under 4V, 100w, 0.15Ω dual coils

The huge-vapor RTA adopts the structure of RDA,  totally  forming a new “RDTA”. The procedures to install FIRELUK RTA is very visual–Build the coil, install the atomization tube, then a “RDA” is formed. Adding a “T”(Tank) to it, it forms a “RDTA”

Though the size of FIRELUKE RTA is big, except for the space occupied by the coil, the actual liquid capacity is only 5ml. If you install the other glass tube, the capacity will become 4ml.

When filling the liquid, you will need to close the two inflow holes at the bottom to avoid leakage.

Though FIRELUKE RTA has two huge inflow holes, the actual inflow is depended by the coil and RBA kit. If the inflow hole is opened completely, there will not be an empty feeling.

When the spare glass tube is installed on, the tank looks much normal as the common tanks, but its capacity is lowered to 4ml.

No matter huge vapor or small vapor, as a RTA, I think the biggest advantage is that its atomization tube can adjust the flavor. Or, what is the difference between RDA and RDTA?

Though the electronic cigarettes and atomizer structure have been developed very mature, different devices still have difference in the “style”.

Freemax keeps making gradual progress on taste. Naturally, taste is the biggest advantage of FIRELUKE RTA. The structure of the finished vertical triple-coil produces very dense flavor. Even when the vapor is huge and the wattage is high, Fireluke RTA can still produce good flavor.

When using the RBA kit and the Clapton coils in the package, with its 0.15Ω resistance, 100w output and 4V voltage are the balance between vapor and flavor. The vapor is huge and dense, the taste is strong, the flavor is restrained and the layering is clear.

Of course, when using the RBA kit together with fancy coils, if you don’t care the volume of vapor very much, it will bring you even better taste under 60-80w.

The performance of the finished coil of FIRELUKE is very stable and I found no obvious defect. Used together with RBA kit, its reliability relies a lot on the processing of the cotton. Though its structure is very easy to handle, you should pay attention that the cotton should completely block the liquid deflecting hole, and the length should be long enough to fully absorb the liquid and will not oversupply to cause leakage.

When you use the RBA kit, you need to pay attention that there might be condensation collected on the air hole, base and other parts. You should clean them regularly.

How do you like this FIRELUKE RTA Tank? It’s now available at Urvapin! Sold only $25.69!

 

First Look at Snowwolf Vfeng 230w

When I first looked at Snowwolf Vfeng230w, the thing came to me is the transformers. It is officially said that Snowwolf Vfeng 230w TC Box Mod has a Robbot design and is made of stainless steel and zinc alloy. Powered by dual high drain 18650 batteries, the maximum output of Snowwolf Vfeng 230w TC Box Mod is 230W. Let’s check its elegance out!

 

 

Features & Specs.

Measurements: 46mm x  34mm x 87mm

Weight: 460g

Materials: stainless steel and zinc alloy

Colors: black, stainless steel, yellow

Robot shaped form factor

Snowwolf logo with changeable LED

LED colors: pink, yellow, blue, purple, red, green

Over-sized hexagon fire button

1.3″ TFT display with color changeable font

Utilizes dual 18650 cells

Micro USB charging

Power output range: 10W to 230W

Full temperature control suite

Resistance range: 0.1Ω to 3.0Ω

SnowWolf Vfeng 230w is available for preorder at Urvapin, both the mod– SnowWolf Vfeng 230W TC Box Mod and the kit–SnowWolf Vfeng 230W Starter Kit

To buy electronic cigarette online, Urvapin is always your best choice to find bountiful cheap vape deals.

Official Website: www.urvapin.com

Best Seller:
ijoy captain pd270
lmc 200w box mod

Voopoo Demon RDA Review

Intro: Recently, Voopoo’s RDA made its debut in the vaping market with the release of Voopoo Demon RDA.

Since Voopoo released its Voopoo Drag 157w TC Box Mod, its advantages and performance price ratio have both been widely accepted and it gives great strength to Voopoo.

Recently, Voopoo’s RDA made its debut in the vaping market with the release of Voopoo Demon RDA. Today I will share this Voopoo Demon RDA with you.

Package is showed in the picture. The official said this RDA has eight colors in total, ivory black, moon grey, rose gold, red, rose red, champagne gold, emerald green, royal blue. The one I have is in rose gold. Its diameter is 24mm. It is featured with side airflow system, aluminum atomization cover, POM insulation spacer and PEI drip tip.

There are two Clapton coils inside of the package. There are several spare screws. Surprisingly, you will find that the two cottons in the package have already been trimmed well to match the finished coils, which is pretty considerate to the new vapers.

Besides, you can also see a gold-plated electrode screw and screw driver, but there is no spare sealing ring.

In daily use, this RDA can be disassembled into three parts as showed in the picture. The side airflow system can be noticed clearly.

Demon RDA adopts airflow system with four strip-styled holes on the two sides.

By spinning the top cap, you can adjust the span of the inflow holes. The two lower holes can be used separately by spinning to close the two upper holes. But it’s not possible to use the two upper holes separately.

Below the gold-plated base, there is an insulation spacer made of POM material.

If the black insulation spacer is changed into the yellow PEI material, it might look more harmonious. But it is certain that the insulation effect of this black spacer is much better.

There are several anti-sliding grooves on the PEI top cap to increase the frictional force when you adjust the airflow.

The inside part of the drip tip is designed with a crooked top which can effectively prevent the condensation from being sucked into the mouth.

https://www.urvapin.com/media/2017/07/Voopoo-Demon-RDA-08.jpg

If you look from the drip tip, you will find the “liquid outlet” of the bottom refilling system. If you use bottom refilling system, the liquid will flow from the “liquid outlet” to the cottons at the two ends. But this will happen only when the atomizer is totally at a horizontal level.

If you don’t use bottom refilling system, you should pay attention to drip the liquid on the two sides evenly.

There is a circle of groove at the drip tip. The drip tip is totally insulated by the PEI material. Its heat-insulation is beyond doubt.

By adopting the aluminum cover, it improves the heat-insulation performance and the atomizer becomes lighter.

More and more products start to use such “electrode wall”. Such structure can compress the space both at the left side and right side, thus there is no need to install this atomizer with very thick diameter to satisfy the explosiveness space.

The coil locking hole is quite big that fancy coils with non-extreme width can be comparable with the holes. But you can see the liquid sink of this RDA is not very deep.

You will need to center the coils on the electrode thus the upper and lower airflow holes can rightly face the coils. (The coil in the left picture is slightly low.)

When I use the coil with data of A1/22G/3.0/5, the result is pretty satisfying. If I use the Clapton coils in the package, the vapor feels more  granular and the temperature will be much higher.

But the liquid sink of this RDA is not very deep. If you drip too much liquid in it, and you have the habit of blowing at the first vape, then you will need to prepare a piece of tissue to wipe the liquid coming out from the airflow holes.

Regarding the airflow hole of this RDA, the regular method is to aim the coil to the upper flow holes. When you use it,  you can adjust their sizes according to the explosiveness of the coil, and leave the lower airflow holes open.

The multiple colors and compact size of Voopoo Demon completely follow the development tide of the atomizers nowadays. Personally, I think the liquid sink can be further optimized with much bigger size.

Order it from Urvapin now! Any comments, leave it below.

Official Website: www.urvapin.com 

Best Seller:
ijoy captain pd270
lmc 200w box mod

ASVAPE Michael Box Mod Review–The Fashion Product in the Vape World!

Intro: Featured with its fashion tags “independence, originality, swankiness, taste and attitude ”, I prefer to call Asvape Michael the “the fashion product in the Vape world” with both appearance and usability.

“Fashoin Brands” normally refer to those original brands who have their own designs that represent the designers’ unique thought quality, style and living attitude. The overall products are considered fashionable.” interpreted by the Encyclopedia.

There are lots of fashionable brands around us, mostly the garments industry. “Independence, originality, swankiness, taste and attitude” are all important tags to fashionable brands. When I first saw this Michael Box, I thought the illustration style is the tag of this “fashion brand”.

On the surface of the illustration of Michael Box, the touch feel of the paint is pretty good. During the time when I was using this mod, I didn’t give it any protection on purpose and didn’t ask the manufacturer what is the workmanship. After 10 days, there isn’t any scratch on it. Though it cannot prove how wear-resisting the paint of the illustration is,  it does prove that it’s not so weak to be easily scratched.

There is not very many difference between it and the Strider box mod. The point is the instruction book in it is written with detailed operation guide and parameters.

Through the visual impact of illustration on the mod, together with the gold sand-blasting metal frame, you can find Michael Box is really in the retro style of OLD SCHOOL. If you cannot search out any impression in your mind, you can google the retro tide of some European luxury brand to find related shadow.

As a dual 18650 battery box mod, Asvape Michael is not heavy even after it has the batteries in it. It measures 34mm wide, 51mm long and 91mm high. Compared with most of the mods in the market, its size is much bigger.

In fact, if you have ever hold the arc of the mod and the skin-like paint, you might say the touch feel and hold-feel of Michael box is very comfortable. “swanky”  is another outstanding feature of “fashion brand”. As a product designed with pretty good ergonomics, not only its full grip can satisfy your hand, the swanky style of its color matching makes you just want to show it around. The product is oriented to the vapers who like high-end products.

Since you can see from the picture above, I will just not give too much description to the heat emission holes at the bottom and the exquisite fire button.

There are lots of grooves and a mark of ASVAPE surrounding the 510 connector. From the connection gap near the connector, you can see the craft trail of connection between the illustration and the shell. I’m not clear how such craft works, you need observe carefully to find the trail near the connection. As for me, I can accept such craft, but whether some obsession-compulsive vapers might mind it, it will be their choice.

Another important tag of this fashion brand is “attitude”. The reason why I am over-blowing the “fashion brand”concept of this Michael Box, it’s because it has many features of fashion brand.

With the human-machine arc of the mod, when the vaper’s finger presses on the fire button, it can well feel the fullness of the button, and the ringing feedback of the fire button also makes the vaper feel comfortable. After actual test, atomizers of 24mm diameter can perfectly match this mod. With its 200w high output, it can match most of the atomizers of this atomizer.

The battery compartment cover is designed as push-open. It is attached with strong magnet and groove positioning. When installing the battery cover, you first need to aim the battery cover at the groove. When disassembling the battery compartment cover, you just need to press the cover slightly with your thumb and then push it outward. The inside of the battery compartment has insulation layer and gold-plated spring-loaded electrodes with perfect workmanship and quality!

Generally, some products are defined as only-good-in-appearance because of pretty appearance. Limited by techniques, it is unavoidable to see homogenization among the mods in the markets. The overall visual appearance, human-machine grip design, the fineness of details are all satisfying. Adding to the completeness of the “shell”, ASVAPE company equips this mod with the VO2OO chip of high maturity.

The adjustment button of VO200 is an integrated one with “+” on the left end and “-” on the right end, which is different from that of regulated mod chips. As a chip of high maturity and recognition degree, its explosiveness and maximum output are just beyond doubt.

The operation of this mod is instructed in details in the instruction book, thus I’m not going to show it here. Here I want to mention the Bypass mode of VO200 which is often misunderstood as “burnt after taking one vape”. The bypass mode is actually a function stimulating the mechanical device with dual batteries in series. If you want to experience the effect of this mode, you need to consider if the ventilation of the atomizers at your hand can satisfy its extremely high heating voltage, if the resistance and coil parameters in the atomizer can support the mod. This mode is completely designed for the experienced vapers who has very good knowledge on resistance and coil. New vapers should pay attention to this mode.

Asvape Strider is equipped with VP75 chipset. Depending on its good reputation, this product has been on sale in the market for a while. As the second mod of the ASVAPE brand, the visual illustration endows it a pretty high-end appearance,  its well-designed human-machine arc gives the vapers a very good hand feel, and the VO200 chipset ensures the mod with excellent usability. After experience, Asvape Michael Box is not only a mod with good appearance. Featured with its fashion tags “independence, originality, swankiness, taste and attitude ”, I prefer to call Asvape Michael the “the fashion product in the Vape world” with both appearance and usability.

Official Website: www.urvapin.com

Hot Seller: Smok T Prive 220W BOX MOD

Smok T Priv 200w Box Mod Review–Anime-Styled Vapor Beast!

Intro: The vaping device I bring today is the newest mod from Smok, the Smok T Priv 200w Box Mod.

The vaping device I bring today is the newest mod from Smok, the Smok T Priv 200w Box Mod. The appearance design of Smok T Priv is quite unique and different from the previous series.

As a 220w dual-battery mod, on its appearance,  Smok T Priv does not have very much difference from the mods sold in the market.

Its appearance has been processed with varnish painting technique. The paints attached with metal granules painted on the mod highlights its metallic appearance even more.

The workmanship of T-Priv is quite complete as a whole. As the picture above shows, the battery compartment which would not be noticed is also well painted.

In order to ensure the completeness of the mod body, the screen is designed on the top of the mod and is close to the 510 connector with a small gap between them. Such design enables some big fat atomizers to be used on this mod.

The fire button succeed the classic design of Smok, the “hold-press style” fire button. Since the box mod is quite wide, the fingers will not easily get tired after long time pressing the fire button. On the opposite side of the fire button, there are the two adjustment buttons “+” and “-”, which skillfully solve the inconvenience to adjusting the wattage.

But the features above are not what make me fond of this T-Priv. As a fan of Gundam and Transformers, the side face relief of Optimus Prime of this mod arouses the memory of my childhood deeply. Such design shows that the designer is also a fan of Anime.

Especially when the LED light bar flashes in the dark night, it’s hard for me not to associate it with the classic Gundam RX-O.Exactly, anime is the design element of this mod. The light bars shines in different colors, just like the lights brightening in the night club.

T-Priv adopts the traditional chipset of Smok. Pressing the fire button five times continuously to lock the screen. Pressing the fire button three times to enter into the menu. Pressing the “_” and fire button simultaneously to enter into the TC setting mode. The COLOR option on the main menu is for setting the lighting effect. Vapers can choose different colors and light changing speed according to the vapers’  costume matching in the nightclub. In the night lights, T-Priv can be the most shining Optimus Prime and there will be no worries for the vapers to find it in the nightclub.

With the classic 220w chipset, its output is beyond doubt. Matched with the domineering shell, Smok T Priv is full of violence.

SMOK T-Priv 220W box mod Features & Spec:

Colors: Red, Green, Blue, Yellow, Magenta, Cyan, White, RGB, Rainbow
Size:86.6*48.1*32
Power Range: 6-220W
Voltage Range: 0.5-9.0V

Multiple Protections: Intelligent atomizer recognition, short circuit protections, puff monitoring system, over-heating protection, 12 seconds cut-off, low battery warning.
Resistance Range: 0.1-3Ohm(VW)/0.06-3Ohm(TC)
Temperature Range:200-600℉/100-315℃

SMOK T-Priv 220W box mod Package:
1 * T-Priv Mod
1 * USB Cable
1 * User Manual

In the past, electronic cigarettes favor toward the Punk style. For this time, Smok brings us an anime style, just like a fresh air blowing into the vaping groups. With its high wattage 220W, Smok T Priv can bring you a wonderful vapor chasing experience.

Smok T Priv 220w is now available at Urvapin in full stock, and now its kit, Smok 220w T Priv box mod with TFV8 Big Baby Tank Starter Kit is also in stock now.  If you have any other question, feel free to consult our online service.

Official Website: www.urvapin.com

Hot Seller: Smok T Priv Box Mod

Wismec Reuleaux RX GEN3 300W Kit Preorder

Wismec company has just released Wismec Reuleaux RX Gen3 300w kit, which is the third generation of Reuleaux box mod. It is much smaller, lighter and more ergonomic than the previous versions.

Wismec Reuleaux RX Gen3 Kit comes with a Reuleaux RX Gen3 300w Box Mod and a Gnome Atomizer. The Gnome Atomizer comes in two versions, capacities of 2ml and 4ml.

All the parts of GNOME atomizer can be detached and reassembled, bringing much convenience in cleaning it. Simply by sliding the top cap, you can finish the refilling quickly and easily.

It is supposed to be powered by three replaceable 18650 batteries and the maximum output can reach up t0 300w, bring you an excellent vapor chasing experience.

The 1.3 inch large display with user-friendly interface can present all parameters in a more clear way.

The Gnome atomizer is equipped with brand-new WM coils: dual 0.15 ohm head and WM03 Triple 0.2ohm head,  providing you with different vaping experience.

The Reuleaux RX Gen3 box mod is featured with dual circuit protection and reverse polarity protection.

Reuleaux RX Gen3 box mod comes with up-gradable firmware, making it be always up-to-date.

The USB port at the bottom of the LED screen is for charging. You can charge it by connecting it with a computer or a wall adapter via USB cable.

WISMEC Reuleaux RX GEN3 300W Box Mod With 4ml GNOME Atomizer Features & Spec:
Size: 39.3*48.8*113.7mm
E-liquid Capacity: 4ml
Thread Type: 510 spring loaded connector
Cell Type: high-rate 18650 cell (discharging current should be above 25A)
Output Mode: VW/TC-Ni/TC-Ti/TC-SS/TCR mode
Output Wattage: 1-300W
Resistance Range: 0.05-1.5ohm for TC modes / 0.1-3.5ohm for VW mode
Temperature Range: 100-315°C/200-600°F (TC modes)
Maximum Charging Current: 2A
Maximum Output Current: 50A
Output Voltage Range: 0.5-9V

WISMEC Reuleaux RX GEN3 300W Box Mod With 4ml GNOME Atomizer Package:
1 * Reuleaux RX GEN3 (no cells)
1 * GNOME
1 * WM02 Dual 0.15ohm Head
1 * WM03 Triple 0.2ohm Head
1 * QC USB Cable
1 * Glass Tube
2 * User Manual
2 * Warning Card
Spare Parts

Wismec Reuleaux RX GEN3 300W Kit is now available for pre-order at Urvapin. More details will be on later. Only $69.79 for the moment. Two versions are both available!

WISMEC Sinuous P80 TC Kit Preview

Intro: Wismec Brand company has just released a flagship kit named Wismec Sinuous P80 Kit.

It is no exaggeration to say that Wismec is one of the biggest e-cigs company in this industry. Most of their products gives me a solemn feeling with their huge sizes. For this time, Wismec released the Sinuous P80 Kit with a really compact size.

The Wismec Sinuous P80 Kit comes in five colors totally, black, red-black, blue-black, bronze-black and silver-black. The one I got is in blue-black.

It is packed in a rectangular paper box. When you open the box cover, the first item you see is the Sinuous P80 mod. You might be wondering why there is only a mod inside of the box instead of a kit. No worries, when you take out the the sponge layer for placing the mod and the paper board under it, you will find there is an Elabo Mini atomizer, a user manual for the Elabo Mini atomizer and a user manual for the Sinuous P80 mod, a USB cable, a ws01 triple 0.2Ω coil head for 40-80w wattage.

Wismec Sinuous P80 Kit measures 33.5mm long, 28.5mm wide and 125mm high. It features a unique centered 510 spring-loaded connector. When you screw the Elabo Mini atomizer on it, they look quite a straight shape.

The Elabo Mini atomizer has a capacity of 2ml and can be disassembled into four parts totally, mouth piece, the integrated atomization tube and liquid tank, coil head and the base.

To fill the liquid into the tank, you firstly need to pull out the mouth piece with much force. Push the black top cap along the arrow direction, you will be able to fill the liquid in the tank through the white filling hole. On the base, there are two airflow holes which are adjustable.

The Wismec Sinuous P80 box mod features a side LED screen. Specially, its upper part is the fire button. At its bottom, there are two adjustment buttons and a USB port for charging.

The battery compartment at the bottom features a pull-open lid. When you pull open the lid, you will see the round-shaped battery compartment only for one battery. After you installing the battery, you press and push close the battery lid with a click sound.

By pressing the fire button five times continually, you turn on or off the mod. By pressing the fire button three times continually, you enter into the mode option interface. By pressing the two adjustment buttons, you can make choice between the mode options, including VW, bypass, TC-Ni, TC-Ti, TC-SS, TCR-M1. Under different mode, the screen displays different information, including temperature, watts, voltage, current, resistance and remnant battery capacity.

By pressing the right adjustment button, you can swift options of LED color, logo, preheat and time out.

Though its maximum power is 80 watt, it can still produce very big vapor.

In summary, Wismec Sinuous P80 Kit is well designed with its good hand feel and its compact size is very convenient for carrying around. Though it doesn’t have a very high maximum wattage like some other Wismec devices, it still produces big vapor.

Shop Wismec Sinuous P80 now at Urvapin!

Oumier Wasp Nano RDA Review– Compact Size and Strong Explosiveness

 

Intro: Wasp Nano RDA is compact-sized but can produce huge vapor.

“Hey,are you biting a box?” Not really! Of course I’m not biting a box. It has atomizer on it! Well, it’s too small to be noticed. This tiny atomizer has caught lots of eyes among us and today we are gonna to talk about it–WASP NANO RDA.

WASP NANO RDA is a single-coil RDA atomizer released by Oumier Vape in 2017.

It comes with two colors, gold and silver. The one I have is gold color. When you open the black “honeycomb” (packing box), there is a Wasp Nano atomizer, hexagon screwdriver, screws for locking the coils, Muji cotton, o-rings and a hollow 510 electrode screw.

The atomizer is faint yellow. The two black o-rings look very much like the bottom of a “wasp”, don’t they? Its name really matches the reality, but it spits vapor instead of poisonous stinger. Waps Nano RDA has a diameter of 22mm and it measures 22mm high. Even though in the RDA atomizers, there are crowds of RDAs, Waps Nano RDA can be a strong performer of compact size.

Wasp Nano is made of atomization cap and base. The amber-colored material of the atomization cap is PEI (Polyetherimide) Pei is strongly high-temperature resistant and erosion resistant. The Pei material is usually used for some dual-coil atomizer with huge calorific value.  The integrated atomization cap of Wasp Nano RDA also adopts PEI material. It can effectively insulate the heat from the coil.

Heat insulation is especially important to atomizers like Wasp Nano RDA, mini-sized but producing huge vapor. Besides, between the volcano-shaped drip tip and the electrode deck, there forms a small atomization tube, which is good for the gathering and emission of the flavor.

The silver-plated base is very simple and mostly occupied by two big kitchen-knife-shaped electrode deck. At their first sight, many vapers think it has a presser-styled coil lock. Well, it’s not the truth.

At the place where the “knife handle” of the positive and negative electrode decks are, there is a screw respectively for fixing the coil. Besides, there is a groove at the place for putting the coil, which can prevent the coil end from falling off when we build the coil.

Such design is easy for building both the thick fancy coils and ordinary round coil. The breach of the “knife handle” makes it quite easy to process the coil ends. No matter the holes or edges of this atomizer base, I did not find any defects like burrs. Its workmanship is quite good.

Since it doesn’t adopt the presser structure, why it has such a big electrode deck? Originally, in the center of the positive and negative electrodes, there is a inflow hole respectively, corresponding to the two inflow holes on the cap. The airflow passes through the inflow holes on the electrode deck and blow the coil directly. Such airflow system is more direct and fierce, which is good for lowering the temperature of the coil.

On the other hand, since the inflow holes are in the middle part of the WASP Nano RDA and the inflow holes are canceled at the bottom, which make the bottom be sealed more tightly and reduce the possibility of leakage caused by overfilling the cotton. Wasp Nano RDA is small-sized, but its liquid storage is unexpectedly large.

Correspondingly, center airflow system imposes harder tests on how the atomizer performs with the flavor. Then how Wasp Nano RDA performs with the flavor and vapor. Let’s have a test!

I have been expecting such a dripping atomizer with fancy single-coil for a very long time. Thus for this time, I choose the Clapton NI80 triple-wired fancy finished coils. Its circle diameter is 3mm, twisted in 6 circles and its resistance is 0.26Ω.

This coil is twisted by three A1 wires and wrapped with 40G N180 heating wires. Its heating area is very big and its width is very large which brings a high request on the electrode. The good thing is that Wasp Nano RDA is completely qualified to it.

Generally, the cotton ends of finished coils are in the same direction, but this is not the fact of Wasp Nano RDA. So, we need to process the finished coils before putting them into use. After installing the triple-wire Clapton coil with 3mm circle diameter on the atomizer, you will find the distance between the coil and the electrode deck is about 2mm. No need to worry that the coil might touch the electrode deck thus causing short-circuit.

Though the bottom space of Wasp Nano RDA is very large enough for inserting in more cotton. But after I tried several times, I found that if there were too much cotton inserted in the bottom and too much liquid stored in the cotton, it would be very easy to cause frying of the liquid. But if the volume of the cotton is proper, frying will not happen.

Thus, I suggest that the volume of cotton should be not overmuch. Picture above shows the most proper volume of the cotton.

The liquid for testing is the No.6 liquid of 562 type. Firstly, since the coil is fancy coil, the vapor it produces is quite satisfying. Wasp Nano has quite small a size but unexceptionally strong explosiveness. Its performance on the taste is also praiseworthy. The tobacco flavor of No.6 will be enlarged and its cooling flavor is slightly lowered, owing to the excellent airflow system. Such matching brings a pretty concentrated and soft taste.

But because it produces huge vapor, it’s quite easy for the vapor to be left on the atomization cap and the electrode decks, thus forming condensation piled up on the atomization cap and the electrode decks and needing cleaning.

Strengths:

  1. The design of a single-coil dripping atomizer is very innovative. At present, such atomizer is of very good play-ability but it’s very rare in the market.
  2. Its details of workmanship are well processed with no burrs. No findings of obvious Bug with the workmanship.

Weaknesses:

  1. It’s too compact to match the sub ohm resistance, and too high a wattage might result in too high temperature, thus burning mouth.
  2. Condensation will be easily piled up on the surface of the electrode decks and needing cleaning regularly.

Well, different minds think different. Is this WASP NANO RDA your type? Whether it fits for you? Try it and you will know. It’s now only sold at $14.99 at Urvapin! Shop now!

Official Website: www.urvapin.com

Best Seller:
ijoy captain pd270
lmc 200w box mod

Ijoy RDTA Box Review– All-In-One Kit

I believe you are not unfamiliar to the words- “ecig mod”. The mod you usually see is post-liked or box-liked. There is another product that would brighten the eyes of the vapers, the integrated ecig kit, that is what we normally say AIO kit. With products skyrocketing in 2016, more and more AIO kit comes into our sight.

Usually, the impression AIO gives us is a compact battery-built-in box mod with an atomizer pre-installed with finished coils. But today, the AIO kit I’m going to introduce to you is a big-sized kit–IJOY RDTA Box.

Inside of the pack, except for the iJoy RDTA BOX kit and some regular accessories, there is also the brush for cleaning, finished coils, two finished fancy coils, a 510 drip tip adapter ring and a bilingual specification.

  1. Atomizer

The big-sized RTDA Box mod is matched with an atomizer whose diameter is 25mm. The structure of the atomizer is the same as the regular RDTA, separable as  atomization tube for heating and the liquid tank. However, its body is much bigger than the RDTA we normally see!

Especially when you screw off the atomization tube, you will see one of  the RDTA’s highlights–a huge liquid tank (I think it can be called liquid depot). The capacity is 12.8ml! Though the connector of the atomizer and mod is also gold-plated, but they are not regular 510 spring-loaded connector.

When you disassemble the atomizer, you will find there is not very much highlight with its structure. By and large, it can be disassembled into drip tip, airflow ring, cap for atomization, electrode deck and base connection ring. “Base connection ring ” is actually the “hollowed” liquid tank of the regular atomizer. Here, it plays a role in connecting the electrode deck and the liquid tank at the base. In lots of RDTA atomizer, you can also find similar structure.

The atomizer of RDTA Box mod is pre-installed with a DIY electrode deck with dual posts and four holes. Besides, inside of the pack, there is a spare 0.15Ω triple-coil, with which huge vapor is also accessible to the new vapers.

  1. Mod

It measures 28*55*105mm and weighs 249g. If you install dual 18650 batteries into it, it will weigh 339g. With its big size and heavy wight, if you carry this ijoy RDTA box 200w around and put it into your trousers pocket, I guess it can drag down your trousers in a minute. Undoubtedly, its portability is not so good.

The entire mod is D-shaped. Its hand feel is average and is just the same as the regular dual-battery mod. On the upper part of the mod, there is a “huge” fire button. The key travel and the feedback force is proper. When you press it down, you will hear a clear “da’ sound. Below the 1.26-inch screen, you can see the “-” button and “+” button. There is a USB port on the mod, but it can only used for upgrading softwares but not for charging.

When you open the sliding-open battery compartment, you will find the electrodes are gold-plated. Closing to the electrodes at the bottom, there is a stealth spring design. The hollowed-out battery compartment is very convenient for vapers to take out the batteries.

Ijoy RDTA Box mod is equipped with a liquid tank of 12.8ml capacity (I should say liquid depot)! When you screw off the sealing lid of the refilling hole beside the atomizer, you can fill the liquid into it (I should say “pour the liquid”)! Since the diameter of the filling reaches 1.5mm, even if you don’t use the filling dropper, you can just screw open the lid and pour the liquid in. There is a LED light in the liquid tank for vapers’ convenience to observe the left liquid.

  1. Function of the mod

The displaying interface is clearly separated into 3 parts. Except for the regular wattage, resistance and voltage, it also displays how many times the vaper has vaped.

Regarding the function of the mod, except for the Ni-TC, Ti-TC, SS-TC and TCR function, vapers can also set the output mode under the common-used wattage mode. Press the fire button 3 times continuously to enter into the menu, then press the “+” and “-” button to switch into “output mode setting”, when you press the fire button to confirm it, you will see four different output modes, norm, hard, soft and user.

The User mode could be the most special setting.

The User mode enables the vapers to customize the output wattage in the first 3 seconds. On the setting interface, there are 6 energy bars similar to the sign of battery remaining capacity. Each energy bar stands for 0.5s work time. Initially, six energy bars all have 50% energy left. Each energy bar can increase or reduce 5 gears. Each gear stands for 10% initial wattage value.

Take the picture below as an example. My initial wattage value is 75w, when the first energy bar increases one gear, then the actual output at the first 0.5s after firing up is 75w*110%=82.5w. After setting the first energy bar, press the fire button to make confirmation to move to the next energy bar to do the setting, and the like.

The effect of this USER mode is very similar to that of the “taste curve”, but it’s more fool-styled. As long as the vaper operates it several times, they can be proficient with it. The entire procedures can be completed on the mod, no need to connect it with the computer for setting.

When I install the self-contained stainless steel fancy coils, I tried it. Under the norm mode of the wattage mode, the mod has 1 second output delay. The output doesn’t explode instantly but is acceptable. Regarding its taste, it is nearly the same as the huge-vapor atomizer, slightly lower density and layering. But the volume of the vapor is magnificent.

Summary:

iJoy RDTA Box is very different from the common “built-in”kit. No matter its shape, weight and sizes of all aspects, they all embody “big”. Dual-battery mod ensures a high-wattage output, at the same time it also has a long endurance.

Vapers can also use finished coils on it. Even if it’s for new vapers to use, it is pretty easy to operate. The most amazing feature of the mod is its fool-styled taste-curve adjustment–USER mode, which can satisfy the increasingly personified vaping habits of the vapers.

For example, some vapers like soft taste at the beginning then steady output. I like hard taste at the beginning then steady output. USER mode can satisfy both the two habits.

However, iJoy RDTA Box 200w also has some weaknesses.

It is not 510-threaeded connector. It can only adapt its self-contained atomizer and coils.

It’s too heavy and big-sized to carry around.

All in all, iJoy RDTA Box is a box mod of pretty good performance and great usability. It’s only sold $59.99 with free shipping. Shop now!

Official Website: www.urvapin.com

Best Seller:
ijoy captain pd270
lmc 200w box mod

Asvape Michael 200W TC Box Mod Devils Night Edition Review

Intro: Asvape Michael 200W TC Box Mod innovates the style of mod appearance!

At present, the industrial design of ecig mods in the market are mostly inclined to paint-sprayed panels or panels with carved patterns. Mods with a large quantity of patterns have never emerged in the mod market so far, thus many vapers choose to purchase mod stickers to greatly personalize the appearances of their mods.

The mod now in my hand has been rightly innovated with its appearance. Most area of the mod has been specially processed thus making the entire appearance more personalized. That is Asvape Michael 200W TC Box Mod (Devils Night)

–Packing–

When talking about ASVAPE, maybe lots of vapers don’t know this brand well, but I believe many vapers must know the box mod Asvape Strider. Asvape Michael 200w TC Box Mod succeeds the unique style of Asvape Strider box mod with the vertical-lifting paper box cover and the magnet flip top inside.

If you open the flip top, you will see the box mod embedded in the sponge. When you take out the box mod together with the sponge, you will see the product warning card, specification and USB below the mod.

–Appearance–

Ergonomically, it conforms to the round mod structure. When it matches with the unique mod sticker of devils night theme, together with the gold panel, endowing this box mod an unparalleled shinning appearance.

                  –Details–

The arc at the 510 connector can well match with atomizers with diameter of 22mm, 24mm or 25mm. The pattern surrounding the 510 connector is also full of a sense of science.

The theme color is covered on the mod by the technique of water transfer printing.

The industrial design of the button is very interesting. The fire button of the workmanship is very exquisite. In the middle of it, there is the logo of ASVAPE, surrounding it, there is printed with wheatears and words as “aequitas inasvape we trust”. The screen is in an Oval shape. The button is full of elastic force, and the feedback of clicking is very ringing.

In the light of craftsmanship, the battery compartment cover should be a casting part and is gold-plated on the frosted surface. The two batteries are connected in series, greatly improving the current passing rate. The inner wall of the battery compartment is made of insulation material, greatly avoiding the risk when using broken-sleeve battery.

               –Parameters–

VW Mode Range: 5-200w

TC Mode Range: 212-572℉/100-300℃

Bypass mode output voltage: total voltage output of dual batteries in series.

Supportable resistance range:

  • Bypass mode: 0.2-3Ω
  • Power mode: 0.08-3Ω
  • TC mode: 0.03-3Ω
  • VPC Mode: 0.08-3Ω

Since the manufacturer has provided the specification in the package, I will just list the basic operations.

On the upper left side of the screen, there displays the wattage/temperature. On the upper right side, there displays the working voltage, resistance, total voltage and battery status. At the bottom, there displays the mode and the system.

By pressing the fire button three times, you can lock the screen. By pressing the fire button five times, you will enter into the options. On the option interface, you choose the system and press “+” button to confirm the present mode, press “-” button to turn off the mod. Choose the mode and press “+” or “-” to switch between different modes.

–Actual Testing–                    

In using, I found the actual output effect is more violent than the displaying wattage on the screen. So, I suggest that vapers choose much lower output than the output they normally vape with in daily use.

The TC effect worths affirmation. It’s steady without very big fluctuation.

Under the mechanical output mode, the output voltage is the total voltage output of the two batteries, that is 8.4v. Since the voltage is too high, vapers should be cautious.

–Actual Experience and Problems Found Out–

The output is pretty violent and the TC mode is very steady. The working effect under curve mode is also satisfying and you can obviously feel the changing of output wattage.

It feels pretty good and the sticker is very comfortable for touching. The arc of the mod body can well fit the palm. The only defect is that the position of the firing button is a little bit low. For the vapers with big palm

In testing, I also found some problems. When the resistance is at 0.1Ω and the wattage is in full output, about 50 seconds later, the mod will be into over-heat protection. The mod burns obviously.

The 510 connector doesn’t have a protruding surface. After long-term use, the paint of the top will surely be abraded by installing and replacing the atomizer.

The firmness of the sticker is pretty good, but if it’s scratched by sharp objects or it falls down, abrasion will be caused. Vapers please be cautious with it.

–Summary–

This Asvape Michael 200W TC Box Mod really find a new path on the innovation of appearance, overthrowing the appearance style of the traditional mod. With its unique appearance and good performance, I believe lots of vapers will love it a lot!

Official Website: www.urvapin.com

Best Seller:
ijoy captain pd270
lmc 200w box mod