For Sale: Uwell Nunchaku 80W TC Kit

The Uwell Nunchaku 80W TC Kit is a vape pen that houses a single 18650 battery, which is pretty unique, usually vape pens come with built-in batteries to keep the size down. The removable battery means you can carry a spare around with you and replace whenever needed.

Despite the fact this is Uwell’s first entry into the vape device market, it is a refined piece of hardware that is easy to use. It has an 80w output, powered by a single 18650 vape battery (sold separately) and includes the Nunchaku tank. Pairing with the device is the new Nunchaku Sub-Ohm Tank, featuring an ambitiously designed 25.2mm tank with dual slotted bottom airflow, 5mL juice capacity, threaded top-fill, and the adoption of the new plug-pull Pro-FOCS Coil Technology (Professional Flavor Optimizing Core System) which increases the quality of flavour.

Safety as ever is a paramount concern for Uwell, and the Nunchaku includes low voltage protection, short circuit protection, low resistance protection, and an 8 second cutoff. All ensuring a safer and better vape experience. When it comes to charging the 18650 battery, it can either be easily removed from the Nunchaku and charged externally; or it can be charged internally via USB.

Uwell Nunchaku 80W TC Pen Mod Features:
Dimensions – 94.5mm Tall, 27.4mm Diameter
Single High-Amperage 18650 Battery – Not Included
Wattage Output Range: 5-80W
Voltage Output Range: 0.7-7V
Minimum Atomizer Resistance: 0.1ohm
Temperature Range: 200-600F
Versatile Temperature Control Module
Supports Ni200 Nickel and Stainless Steel Heating Elements
Power Mode
Bypass Mode
Superior Stainless Steel Construction
Elegant Design Element
Intuitive OLED Display
Oversized Firing Mechanism
MicroUSB Port
510 Connection

Uwell Nunchaku Sub-Ohm Tank Features:
25.2mm Diameter
5mL Juice Capacity
Superior Stainless Steel Construction
High-Grade Quartz Glass Reinforcement
Elegant Metal Sleeve
Convenient Threaded Top-Fill Design
Dual Adjustable Airflow Control at Base
Black Delrin Widebore Drip Tip
Pro-FOCS Coil Technology – Professional Flavor Optimizing Core System
Plug-Pull Mechanism
0.25ohm Claptonized A1 Coil – rated for 40-50W
0.4ohm Claptonized A1 Coil – rated for 45-55W
510 Connection

You can get it with $72.95 from Urvapin, just following this link: Uwell Nunchaku 80W TC Kit

justfog minifit pod kit

For the health-conscious cannabis enthusiast, finding a shiny new vape inside their stocking will surely light their face up with a smile. But you don’t have to break the bank to bless a cannabis consumer with endless amounts of joy. Here’s all-in-one Pod list from AVE40 in January 2018, which will get you covered with all the best enclosed-system devices to match your budget.

Today I’d pick the newest one for you. As the first pod type device newly released by Justfog, ”Minifit Kit” is the stunning and noteworthy pod to meet various needs of vapers, especially for newbies.

Lovely as its name, the Mini Kit is quite tiny with the size of the only 21*15*70mm and the weight of 19.9g! It is a rather portable pocket device. So long as you are pursuing convenience and lightness, it must be your solid choice, whether on formal occasion or leisure time.


Justfog Minifit comes with a built-in 370mAh battery and a 1.5ml pod cartridge. The battery supports constant voltage output with 3-level remaining battery indicator. Battery protection functions (5 Circuits) will prolong its life period.

Besides, things get easier. There is a 5 pin USB cable included in the package. You can recharge it via the power bank or your computer.

With a 1.5ml cartridge, it is 100% EU TPD compliant. At TPD levels, the nicotine in e-liquid doesn’t carry any significant danger for vapers. However, the 2ml limit on nicotine levels will make it harder for new vape users to switch, and make things difficult for many vapers who prefer higher level nicotine.

The pod adopts 1.6ohm coil with Japanese organic cotton coils, which brings the pure flavor. Minifit POD has got a built-in rather durable 1.6Ω coil in it, which is 100% Japanese Organic Cotton Coil—perfect vaporization of high nicotine e-liquid. Now you would not worry about the purity of the flavor thanks to the organic cotton coil.

The POD itself is simply refillable. I really appreciate the tightness on the connection between the mouthpiece cover and the body. The e-liquid leaking or spilling rarely appears during vaping.


The interesting thing is that the best is always the same. Similar to the power lock of VZONE Simply Squonk Kit, the childproof opening system with smart battery protection is applied on the Justfog Minikit to prevent power-on accidentally.

Here, without further ado, let’s talk about its appearance. Everyone could face obsessed but I prefer the device that has tactile appeal. According to the manual, the pod is made of Polycarbonate. Honestly, I can’t explain what exactly it is about the material. It’s just like the frosted surface on which no fingerprint after long-time using. Of course, the high durability owes to its avant-garde material.

Minifit is one of the smallest e-cigarette devices in the market showing strong performance. This thumb-sized device will allow our e-cigarette users to carry and vape. We look forward to providing a perfect solution for daily users who have been searching for a simple but device for their better and easier vaping experience.


JUSTFOG Minifit Vape Pod Kit Features and Specs:
Constant output voltage
Remaining battery displaying
Power on/off function
Smart battery protection
Easy and safe refilling system
Japanese organic cotton
Tank Capacity : 1.5ml
Battery Capacity : 370mAh
Output Voltage: 3.4V
Coil Resistance 1.6Ω (Built in)
Dimension: 21 x 15 x 70mm
POD Material: Polycarbonate
Charging Type: Micro USB
Color: Black, Silver, Red

JUSTFOG Minifit Vape Pod Kit Package Includes:
1 * MINIFIT battery
1 * POD
1 * USB cable
1 * Manual


How to Clean and Re-use your Coil Heads?

How long do you usually use a coil head? You ever complain of high consumption on them? Inspired by a video made by Rip Trippers,  I made the test below. This article might relieve you from the pain. Check it out!

The main reason that cause the scrapping of finished coil is not the color changing of the cotton, but the carbon deposit causes uneven heating and burned cotton, then produces burned flavor. Accordingly, the volume of the vapor also decreases.

What you need to prepare is alcohol. In this test, I used alcohol with 75% density.

First, I poured some alcohol into the container, just to overwhelm the coil head. Then I put the coil head into the alcohol and soaked it there for a few hours.

As soon as I put the coil head into the alcohol, the effect showed immediately. There was some black carbon deposit floating on the surface.

The second day after 15 hours later, the color of the alcohol has become deepened, and the cotton at the liquid guiding holes has become whitened.

After getting the finished coil head out of the alcohol and I found the liquid remnant on the cotton had been completely dissolved into the alcohol and the cotton became pretty white. The carbon deposit in the coils also decreased.

(The two lower pictures were shot with the flashlight open, thus they presented in yellowish color. Actually, they were in the same color as the two pictures above. Similarly hereinafter.)

From the picture, you can see the carbon deposit on the coil has been cleaned away completely.

The liquid guiding cotton outside of the coil also became white.

Then I flushed the coil head under the water faucet over and over again. After I cleaned the alcohol out of the coil head with clean water, I let it dry naturally or you could dry it with a hairdryer.

[Contrast Experiment]

From the present testing result, alcohol surely can clean the remnant liquid on the cotton and the carbon deposit on the coil, but the inner condition could not be observed easily. Thus, I carried out another test with a RBA coil, the effect of which was more obvious.

Warm Hint: The pictures below might disgust you. Please be cautious! Don’t view them after meals! (laughing~)

From the picture above you can see, the coils are covered with carbon deposit. The cotton has been turned into deep brown color by several kinds of liquid.

I put the electrode into the alcohol, I found the same effect. Just as what happened to the finished coils, carbon deposit floated onto the water immediately.

After being soaked into the alcohol for about 12 hours, the cotton became white just as the finished coils did. The carbon deposit on the coil also became less, but it wasn’t cleaned completely as the finished coils were.

I think it’s because the structure of the finished coils and RBA coils are different. Most finished coils adopt ordinary wires with a polished surface and the carbon deposit can easily drop from it. However, the structure of the fancy coils is more complicated and the cleaning effect are not very good.

The fancy coils in the right picture has a simpler structure than the coils in the left picture. The cleaning effect of the coils in the right picture is better than that of the coils in the left picture.

Cut off the cotton and pull it out. You can see that even though the liquid on the cotton has been cleaned away, the burned part can not be recovered. (Everyone knows! Laughing~)

By contrasting, you will see it has a better effect when applying this alcohol cleaning way to the ordinary coils than the fancy coils.

After a few hours, the coils were dry completely. I didn’t smell the alcohol or the chlorine of the water. I dripped liquid onto the cotton of the coil and install the coil onto the base, then turned on the mod. It worked normally and could heat and vaporize the liquid.

After cleaning and drying, the finished coils didn’t  perform very well on liquid guiding. When moistening the coil, you will need to drip sufficient liquid on it to make sure it’s soaked totally.

[Actual Testing Effect]

After assembling the atomizer and filling liquid into it, I vaped on it. The first puff tasted pretty good. The originality of the flavor could reach 85%~90% of a brand new coil.

After I used it for several times, the volume of the vapor decreased and the flavor became worse, mixing with a slight of burned flavor, irritating the throat .

When I disassemble the atomizer, I found the liquid guiding cotton inside of the coil is quite wet, but the surface of the liquid inside of the tank decreases quite slow, slower than the normal situation. Irritation of throat and burned flavor also stands for bad liquid guiding. What on earth is the problem?

Then I remembered the guiding holes of the atomizer. Vapers who have disassembled finished coils should know that there are normally two layers of liquid guiding cotton inside of most finished coils. Except for the cotton layer wrapped outside of the coil, between the liquid guiding holes and the liquid guiding cotton in the inner side, there is another layer of cotton, which you can see from the liquid guiding holes. It’s mainly for limiting the speed of the liquid entering into the coil head, thus avoiding leaking caused by over-guiding.

When I disassembled this layer of liquid guiding cotton, the burned flavor disappeared, and it didn’t irritate throat any more. The flavor and taste was almost the same as that produced by a brand-new coil. It proves that the alcohol can destroy the fiber of this layer of liquid guiding cotton, thus the liquid can not enter into the inside of the coil head smoothly.

Since this layer of cotton is dismantled, when carrying the device around and refilling the liquid, you will need to close the airflow holes, or the liquid guiding will be too fast and a large quantity of liquid will leak at the inlet holes.

It is simple to solve this problem. We can insert a little liquid guiding cotton that we normally use. This will relieve the leakage effectively. But pay attention that don’t plug it too tight to avoid unsmooth liquid guiding.


After experiment, I found “alcohol cleaning method” is surely practical. Regarding its flavor, I think Rip is being a little conservative. In my point of view, I think it doesn’t show much difference from a new coil with regard to the flavor. It can re-alive some lightly-used and medium-used finished coils.

But when you do the cleaning, several tips need to be paid attention:

  1. Be patient. The longer you soak it, the better it will be cleaned. Irecommend 24 hours.
  2. After soaking it in the alcohol, you will need to flush it with clean water. You’d better choose big water flow. It can not clean away the alcohol, but can also bring away part of the carbon deposit.
  3. You must dry the finished coil after cleaning it. Though you can dry it with hairdryer, I think it’s better to let it be dry naturally.
  4. After cleaning it, smell it to ensure that the smell of alcohol and chlorineare removed. Then dry it.
  5. After the finished coil is cleaned, when you reuse it, you must wet the liquid guiding cotton completely. Try it with low wattage first, then try the recommended wattage. If there appears insufficient supply of liquid, you can make analysis on the atomizers of different structures to find solutions. Dismantling or replacing the liquid guiding cotton at the liquid guiding holes is not adaptable to all the finished coils.
  6. When you disassemble the cotton at the liquid guiding holes, pay attention that it might leak because of overguiding the liquid.
  7. This method can be only applied to the slight-used and medium-used finished coils. The burned cotton is irreversible. Therefore, as long as the finished coils have not been dry-burned, have not been used under high wattage, and as long as the cotton around the coil are not burned, the fished coil can be cleaned several times and reused.
  8. The alcohol is flammable. Please keep it safely in case of fire.

If you have finished coils that you almost want to throw them away, try this method. It might surprise you and save you a great sum of money!

Let me hear your voice!

  1. I don’t even know such a method. I will surely try it. If it works, I shall come back again.
  2. Are you kidding me? In no way will it be a truth. I will try and prove that it’s just a fake saying
  3. I don’t use finished coils. I just come and see.
  4. I have an audacious idea. I will tell you in the comment.

Keep tuned! More practical articles will be on!

Cheap vape deals

smok t priv

wismec rx gen3

aspire breeze

PUFF AVATAR RS 75W Box Mod Review–Fashionable LED Light with Changeable Colors!

From the picture above you can see, the package is very special. It comes in a square box. When you pull open the upper layer that covers the box, you will find the packing box is pretty innovative. The first layer is hollowed-out with the shape of the LED of the box mod. On the box, it is printed with the LED light. You will find it’s pretty interesting. When you take of the top cap, there you will see the Puff Avatar RS DNA 75w and a manual. Personally, I really like the box.

As you can see in the picture, the shape of Puff Avatar RS DNA 75w mod is just a rectangular. The first thing you see on the mod is the LED light. The LED light goes through three sides of the mod. On the fourth side, there is the screen and the buttons. The fire button is on the upper part of the screen. Below the screen, you can see the two adjustment buttons, the USB port and the color changing button.

On the top of its bottom, there is the 510 thread. Since the mod is 28mm wide, the largest diameter of atomizer to be used on this mod without overhang can be 27mm after trying.

At the bottom, there is the battery compartment. To open it, you can simply use a key or even the handle of a spoon unscrew the thread. Then you will see the column-shaped battery compartment. It can hold only one 18650 battery. The thread is spring-loaded. On the inside part, there are four grooves and on the outside part, there are several venting holes.

After you installing the battery into the battery compartment, the screen will be on and shows the information of wattage, voltage, resistance, ampere and the battery remnant capacity. To vape on, you need to press the knurled fire button on the screen. By pressing the two “left”and ”right” adjustment buttons, you can quickly increase or decrease the wattage. Below the adjustment buttons, there is the USB port, with which you can use a USB cable to charge the mod.

Below the USB port, there is the color changing button. By pressing this button, you can change the color of the LED light. The light can be changed in seven colors, white, yellow, green, blue, orange, purple and red. You can adjust the corresponding color to match the clothes you’re wearing, and it is surely a pretty good choice to vape this mod in a nightclub.

For more operation instruction, the manual gives detailed instruction. I will not show it here.

This mod adopts a DNA75 chip. The mod can reach a maximum wattage output of 75w. Though its explosiveness is not so strong, it can still produce big vapor, even powered by only one battery. Pictures above show the vapor produced at 75w and 30w. Personally, when it’s under 75w, the vapor is much bigger; when it’s under 30w, the the flavor is much bigger.

In summary, Puff Avatar RS 75W Box Mod is absolutely a fusion of fashion and simplicity. For those chic vapors, this Italian-designed box mod will be a fabulous choice.

To buy electronic cigarette online, Urvapin is always your best choice to find bountiful cheap vape deals.

Official Website:

Best Seller:
ijoy captain pd270
lmc 200w box mod

What is the difference between RBA, RDA, RTA and RDTA? 

RBA, RDA, RTA and RDTA, what’s all the about? Do you know how to sort them out?

Just like shopping for a proper pair of shoes for a special occasion, there is also need for you to know how to choose a proper tank to satisfy your personal need.

Small knowledge to share with you ~

From the usage, atomizers can be divided into two categories, the huge vapor oriented atomizers and the flavor oriented atomizers.

If you vape for replacing smoking, you can choose the flavor oriented atomizers. If you vape for playing and you like huge vapor, you can choose the huge vapor oriented atomizers.

Structurally, tanks can be divided into two big categories, finished atomizer and RBA.

Finished atomizers always comes with finished coils and come into two types, the huge vapor oriented atomizers and the flavor oriented atomizers.

RBA tank means you can build your own coil on it, including RDA, RTA and RDTA.

RDA is short for Rebuildable Dripping Atomizer; RTA is short for Rebuildable Tank Atomizer; RDTA is short for Rebuildable Dripping and Tank Atomizer.

Structures of different atomizers:

A finished atomizer is composed of drip tip, top cap, oil tank, finished coil and base.

RTA is composed of drip tip, top cap, atomization warehouse, oil tank, electrode base.

RDA is composed of drip tip, atomization warehouse cap, atomization warehouse and electrode base.

RDTA is composed of drip tip, atomization warehouse cap, atomization warehouse, electrode base and oil tank.

Suggestions for purchase:

1.Due to the fact that finished atomizers maintains the strengths of stable flavor and easy operation, they are more suitable for the new vapers or the vapers who don’t have the time or don’t want to build coils.

2.After a long time development, RTA starts to polarize into two directions. One is the mouth-to-lung RTA that focuses on the flavor of the oil. Another one is the direct-to-lung RTA that focuses on huge vapor and long duration time. The simplest way to distinguish them is size of the air inlet.

3.RDA also polarizes into two directions, one is oriented to the huge vapor and the other one is oriented to the flavor. Vapers can distinguish them by the size of the warehouse and air inlet. Generally speaking, the flavor-oriented RDA has smaller atomization warehouse and air inlet.

4.RDTA is equivalent to a RDA with a oil tank. Such design is to improve problem of RDA that it has low oil storage in the cotton.

After evolving for so many years, there appear various atomizers in the market according to the different requirements of the vapers. All in all, all the innovative structures aim at bringing better vaping experience to the vapers.

Article Source: What is the difference between RBA, RDA, RTA and RDTA?

Secure Link:

Recommended Products:


Usage Experience of Tesla Terminator

New Vapers check out the device we are going to talk about today —Tesla Terminator!  

“What wattage should I choose?””What voltage should I choose?”

In the daily communication, new vapers usually have such questions. In spite that vapers are free of the trouble to build coils when using the finished coils, they still have confusions on choosing the wattage.

Surely, there are lots of cigarette alternatives applying” fool-style operation”, but most of them are positioned as “cigarette alternative” and adopt designs that can not be compatible with other atomizer devices. Today I will share a starter kit from Teslacigs with you guys. You don’t need any basic knowledge to operate this starter kit—.



The Tesla Terminator Kit adopts white roll-shaped package. In the package, there is a terminator box mod, a finished atomizer, a spare glass tube and sealing rings, spare finished coils, a USB cable, a certificate of qualification and separate instruction books of box mod and atomizer.

The Terminator box mod is supported by a single 18650 battery. Though its size is compact  with only 80*36.5*22mm, it still features the same strong industrial style as Tesla Invader 3.  Compared with Invader 3, Terminator has an extra 2A fast charging and supports vaping while charging. In using, it is more human.

It is said officially that the box mod is painted with black metallic paint and comes in four colors. At the two sizes of the box mod, there are heat emission holes connecting directly to the compartment. There are LED indicator lights and USB charge port on both sizes (beside the TESLACIGS LOGO). The compartment cover is carved with the TERMINATOR LOGO and the five convex lines on it  which can add the friction force of the hand and can also play a role of decoration.


When you take a full look at the Terminator, it’s not hard to find that there is only a fire button on it. The silver-lighted fire button is somewhat incompatible with the body. The operation of terminator adopts the “machinery concept “. Your operation only need a fire button and the mod will automatically match output wattage for you.

The 510 thread is silver-plated. At the bottom, there is carved with relative information, max 90w, supports 0.1Ω, designed by Teslacigs, input 5V-2A.

The well-made compartment utilizes the combining form with strong magnets. When you open the cover, you can see the negative and positive signs (if the batteries are not installed right, the box mod will not be able to turned on normally.) Though the box mod is not equipped with the auxiliary bar to disassemble the battery, there is a sunken slot at the X position. Vapers can use fingers directly to get the battery out easily. There is no connection gap between the compartment and the cover, but slight wobbling appears sometimes.

Terminator is a box mod features single 18650 battery. It has stronger generality than the ordinary cigarette alternative and can connect any atomizers with 510 thread. However, if the diameter of atomizers are equal to or bigger than 24mm, the edge will be exposed. Picture above is a RDA of 24mm.

The matched finished atomizer is also named Terminator. The structure and style are both very similar to the previous Captain and Blade made by Teslacigs. From the  Glass tube, you can see the huge filling hole of the finished coil. There are four such holes in total. For testing, I fill the tank with 60% VG oil fully and stand it for a night. It was found that only slight oil frying appears and no leaking appears.

Terminator Tank is still the ordinary structure of TESLACIGS RDTA atomizers. The coil connects directly to the top cap. Such structure decreases the length of the vapor flue and makes the vapor get into mouth through a shortest journey. In the light of the workmanship of the atomizer, there is no big problems. However, there is no burs on the black sealing ring at the bottom of top cap, but you might have a not very good hand feel.

The popular gold-plated electrodes are very common, while this  unique TESLACIGS brand uses the silver-plated electrodes. When you disassemble the atomizer, you will see just several parts (not very many) which is convenient for cleaning. After you finish a tank and want to clean it, you can disassemble the coil and wipe the condensed liquid inside the base with tissue.

The terminator atomizer adopts the top filling system. The official instruction book suggests that the air inlet be closed before opening the top cap for filling.  The inflow of the atomizer is positioned by a post. When you look into the inside of the airflow hole, you can see there is a buffer space. In actual use, the  suction resistance of this atomizer will not be to empty. When the inlet hole is half closed, the feel of suction is very comfortable.

In the light of flavor, the reducing capacity of the oil by using the 0.2Ω coil is very satisfying. The overall reducing degree is very even. For example,  when you use the fruit oil flavored mint blackcurrant,  this atomizer will not amplify the flavor of mint, neither the sweet flavor of blackcurrant. All the flavors are very even.

There is no ignition delay. The simple single button operation is really basic. On the instruction book, there is the detailed information introducing the instruction lights. It can instruct the remaining capacity of battery and malfunction by different colors and glittering.

In the light of the atomizer of Tesla Terminator, there is no leaking problem and the oil deflecting speed is also satisfying to most new vapers.

Secure Link: 

Recommended Products: