IJOY Mercury Starter kit

IJOY Mercury Starter kit Review

Glory AIO called Orion, which was released by Lost Vape, does not give rest to many manufacturers. Therefore, they have adopted a similar form factor and now offer their own vision of this issue. In my memory, this is the fourth such project. 

IJOY Mercury kit 

IJOY Mercury Starter kit Review

Dimensions: 78.4 x 40 x 20 mm 
Weight: unknown 
Case material: zinc alloy + stainless steel + resin 
Power: built 1100mAch 
cartridge Volume: 2ml 
evaporator Resistance: 1.0 / 1.2Ω 
Output Power: 12W 
Voltage Range: 3.15V 
mode: POWER 
Protection:low / high resistance, overheating, short circuit, overcharge / overdischarge 
Screen / diagonal: no 
Micro-USB port / charging: yes, charging current is unknown 
Color: see photo below 

IJOY Mercury Starter kit Review

Package
contents – IJOY Mercury kit 
– replaceable evaporator 2pcs 1.0 / 1.2Ω (one preinstalled) 
– USB cable 
– user manual 
– warranty card 

IJOY Mercury Starter kit Review

Our hero looks quite nice. This is a medium sized box with slightly cut corners for better ergonomics. From the decor only resin – here it is with a vengeance – and the panel is colorful, and the type of drip echoes its coloring.

IJOY Mercury Starter kit Review

The complete tank has the following parameters – 16.8 x 55.2mm. It is fixed by a magnetic connector, but it is not the 510th. 

IJOY Mercury Starter kit Review

The tank will be refueled from above; it is enough to remove the drip type and uncork the silicone plug. Capacity, perhaps, standard. 

IJOY Mercury Starter kit Review

Accompanied there are two types of replaceable evaporators. Their resistance does not differ much, but the heating elements themselves are different. 

IJOY Mercury Starter kit Review

Also, the developers provided for adjustment of the blower. 

IJOY Mercury Starter kit Review

The main body hides in its womb an average capacity of the built-in battery. Unfortunately, the charging current is unknown, the connector for this purpose was placed at the very bottom of the control panel.

IJOY Mercury Starter kit Review

The control panel is made nicely – a large fire button, under it a “jackal” of LED indicators. By the way, at the very top, there was a lug for fastening the lanyard.

IJOY Mercury Starter kit Review

Naturally, holes are provided in the housing. The first is to control the liquid level in the atomizer, the second is for air intake – this is where the above-mentioned evaporator blowing ring is located. 

IJOY Mercury Starter kit Review

Check It Out: iJoy Mercury Starter Kit 1100mAh

Related products:
Voopoo Drag Nano Pod Starter Kit 750mAh
Smok Trinity Alpha Starter Kit 1000mAh
VZONE Scado Pod System Kit 500mAh
Hot Article:
Aspire AVP AIO Kit Review
Geekvape Frenzy Review: Another LostVape Orion?
VOOPOO DRAG Nano Pod Kit Review

Leave a Reply