Usage Experience of LMC ARMS RACE 200W— Cool not only outside but also inside

The new products release time of LIMITLESS (called LMC below) always attract a crowd of followers due to its edge-cutting design.  Appearance has always been an killer of LMC to surpass other products, and the coexistence of its actual functionality and edge-cutting design is also the reason why it’s liked by players.

No matter in which period or place, the military style will never be out of fashion and can attracts lots of followers. Recently, LMC released a box mod ARMS RACE powered by dual batteries of big power and based on the design element of “bullet box”. Here below I will bring the actual usage experience of this mod to you.

The package of ARMS RACE box mod adopts the style of hat box. The wide range of gilding Medal pattern really shines the eyes. The back is printed with some information of the LMC brand but without detailed specifications. Since the one I have is just a sample of it, there is only a mod with a brand card, in the package, none any spare parts.

The mod is painted with rubber paint, giving it really nice hand feel. The whole shape of it is very close to the bullet box of ruffle. The camouflage pattern of the bottom attaches a shining point to its appearance. No relative materials has been published officially. The light body should be made of plastic. There is completely no pressure to carry it around.

The black part  on which side shows the sign of LMC is the screen. The screen of the mod is a little bit dark. The two sides of the small cross section are processed with the shape of semi-circle and square separately.  On the semi-circle side, there is a gilding medal pattern for decoration. On the square side, there is the switch and adjusting buttons.  In the light of the hand feel, the ARMS RACE box mod is of very good quality.

The camouflage pattern part at the bottom is the lid of battery compartment, adopting the light-weighted alloy material.  On the side where the eight pressure-releasing holes is on, there is a switch-pusher of the battery cabin. The lock of Arms Race box mod’s battery adopts the way of clamping but not strong magnet, further simulating the operation of military bullet box. The USB port is on the side of the switch and can realize the direct charging of the box mod.

The 510 thread on the top adopts the gold-gilded spring electrode, but at the connection, there is none integrated scabbing-proof plate. If it is in long-term usage, unavoidably, there will be scratches. The concave-convex on the top and the oblique petal pattern by the 510 connection both fortify the military style.

As for the workmanship, you can hardly find faults or weaknesses. There is a reasonable assembling gap between the “510”connection and the top of the mod.  Though the gap is not caused by faults of workmanship, it will have the problems of stocking dust or liquid. Once there appears such problem, it will be hard for cleaning.

When the lid of the battery compartment is pushed in, it will connect with the mod perfectly. The buttons of the mod are all of light elastic force.  The camouflage paint is the rubber paint. Though it can give the mod a nice hand feel, it can easily have the problem of peeling off. This is the defect of rubber paint.

When you open the lid of the battery compartment, you can see the thoughtful design for the positioning of the lid—two round holes. When you install the lid, you only need to push up the lid.  When you hear a slight sound of “click”, it indicates that they match well. In all the aspects, this ARMS RACE box mod imitates the real military device and gives a feeling of military experience.

The mod can match tanks of 25mm diameter maximally. On the appearance, there is nearly no edge exposure problem due to that the petal-shaped arc plate can encircle the atomizer in it. When using the fire button, the slide proof combining the rubber paint gives the mod very good hand feel. Every click for firing is very crisp.

The ARMS RACE box mod adopts the chips that is costumed for LMC. The operation of such chips is of slight difference to those in the market. Users will need some time to adopt to it. Here I will give you a brief introduction of the key combinations.

Click the fire button five times to switch on/ off the box mod.

The mod will automatically recognize the resistance, and the new atomizer will indicates the choice of new or old. Adjusting the button to switch between them and press the fire button to confirm it. In the TC mode, when you install the atomizer of A1 coil. After recognizing, the mod will default back to the Wattage mode.

If you press the two adjusting buttons simultaneously, you can lock or unlock the wattage adjusting button.

When you press the “+”button and the fire button simultaneously to step into the mode selection situation and when you press the adjusting button to chose the mode, the mod will switch between the “Wattage Mode”, “ Autonomous TC Mode”, “Automatic TC Mode”, and you can press the fire button to make confirmation.

Under the wattage mode, the mod can be adjusted to 200w maximally. For the moment, there is none relative information illustrating the supporting range of the minimized resistance. I installed a A1 RDA of 0.09 Ω and found out that it could be used with this mod. As regard to the firing performance of the mod, ARMS RACE box mod has no firing delay problem. Under the low resistance of 0.09Ω and the balanced wattage of 150W, the performance can be described as firing if you pressing. The heating stability is good.

Though the TC mode has become common after being a flash in the pan for a while, this mod still remains the TC mode and even sets two different types of TC modes. Since this mode doesn’t have official instruction, here I will give some brief instruction based on my usage experience.

When you switch the mod into the TC mode with the J logo, the mod will indicate to choose the material of the coil (NI/SS316/TI) before getting into the mode. When getting into the mode, the mod will completely get into the automatic situation. When you fire the mod, it will automatically match a proper J value corresponding to the resistance of the atomizer. When in this mode, the mouth feel will be soft. For the test, I used the atomizer of 0.4Ω single coil, the mod automatically matches a heating wattage of 20-30J(you can not adjust the resistance manually). But the actual situation of this function needs to be introduced officially. This time is only a simple experience.When you switch the mod into the TC mode with logo “TC”( namely the common TC mode), before the mod gets into the mode, you will need to confirm the wattage, the material of the coil (NI/TI/SS316/TCR) and the temperature, then the mod will get into this TC mode. The way of using it is of very little difference to that of the common TC mode. Users can set different specifications to change the mouth feel.

LMC adopts the military style to design this ARMS RACE box mod, and uses the chips with satisfying performance to make it not cool in its appearance. In today’s competition of mods, besides the chip performance, overall quality, simple operation, players also need some “cool” products. LMC is such a product targeting these products. But whether on earth you will place an order on this product, it will  depend on whether you can resist the charm of the military style.

Article Source: Usage Experience of LMC ARMS RACE 200W Box Mod — Cool not only outside but also inside

Secure Link: 

Recommended Products:

Remark on Five New RDTA and Skills for Using

Intro: Review of Five RDTA atomizers– Smoant Battles Tar RDTA/Serpent RDTA/Merlin RDTA/Merlin RDTA/ Limitless 25mm  Gold RDTA 4.75ml tank

From the year 2016 to the present, experiencing a slack period for a while, RDTA atomizers largely emerge in the market again. Today, we pick out five newly-emerged and distinctive RDTA atomizers to present to you and also will provide some using skills.

The RDTA atomizer we are talking about is not defined with complete accuracy. I will divide them into two parts. One is that it has the common rda atomizer structure on the top and oil tank at the bottom (strictly speaking, this should be classified as RBA atomizer ). I call such atomizer as RDTA in a broad sense (after all, such type has been accepted by the public). The other one is that it can be changed between RDA and the general-sensed RDTA, namely RDTA atomizer in a narrow sense. The lists below contains such two types of RDTA atomizers. What exactly are the details? Let’s talk about them separately.

 Smoant Battles Tar RDTA

The structure of this atomizer is very similar to that of the Limitless RDTA Plus appeared in an earlier time. But compared with Limitless RDTA plus, it strengthens the tightness. At the cap of the atomization warehouse, the dome is designed to be gathered inward, thus enhancing the density of the vapor and make the flavor  much thicker.  The color of this Smoant RDTA synchronizes with the color of the mod.  It can be said that they are officially  matched.

After the improvement of the weaknesses of the previous RDTA, this Smoant RDTA atomizer can be called an excellent RDTA atomizer.

Serpent RDTA

This atomizer adopts many structures that are different to other RDTA atomizers. So to speak, this RDTA is very unique among all the RDTA atomizers. No matter its presser-styled electrodes, o-ring sealing to two filling holes, and the middle-to-bottom inflow system, all of them makes this RDTA very special. The tiny atomization warehouse can produce extremely compressed vapor and bring dense flavor.  The special structure can well support the user to vape at a standard flavor data with high power for a long time without any  oil defecting problem.


So to speak, this RDTA atomizer is a flavor-oriented atomizer and can store oil. It has excellent flavor and good capacity. Surely, its anti-leaking is also a very important strength.

Merlin RDTA


This atomizer is made lots of efforts on the appearance. No matter the Logo on the atomization warehouse, the net carve pattern on the top cap and the base, and the gold-plated hollow carve parts in the oil tank, all of these structures endows this atomizer with a primitive feel of totem. The filling hole adopts the way of filling in the middle.  The filling hole can be sealed by the plug component on the top cap. The cotton hole adopts the arc open type design. Each side has a cotton hole. (It really tests the skill of wicking. If the cotton hole is not plugged well, it will surely results the oil leaking from the cotton hole. )  The electrode adopts the design of dual posts and dual holes. The width of the oil locking holes is enough to install the combined fancy coil which is comparatively wide. The bottom inflow system strengthens the performance in flavor.

From the appearance and the unique structure, this atomizer is full of creativeness. In using, since the space between the two electrodes is very wide and the size of the coil locking holes is big, this atomizer actually matches the combined fancy coil and can ensure good flavor. But it’s really hard for the new players to do the wicking.

 Limitless 25mm  Gold RDTA 4.75ml tank

The first narrow-sensed RDTA atomizer we mentioned here can choose to install or not install the oil tank through changing the connections of the components (RDTA or RDA).  It also provides multiple electrodes for the players to satisfy different needs on building the coil and different coils. The appearance is very simple without many complicated lines or patterns. The diameter of the atomizer reaches 25mm, stunning! Such long diameter brings huge atomization space and accordingly can meet different installing needs of the fancy coils. But the problem also comes. The huge space cannot compress the vapor well. The user can only use the ordinary low-resistance coil that can produce huge vapor and the fancy coils to gain a good usage experience.

In summary, this RDTA is of very high playability.  The only defect is that its sealing is not very good, and it sometimes has the  leaking problem.


This RDTA is also convertible on its shape. But the converting method is a little bit different to the NEW LIMITLESS RDTA.  To fill this atomizer, you will need to disassemble the oil tank.  After filling the tank, then you assemble the electrode base back to the atomization warehouse. The operation is hard, but it completely avoid the leaking problem caused by bad sealing (Oil leaking caused by bad procession of the cotton is not counted in ).  There is bottom inflow hole and top inflow hole, both of them are adjustable. When adjusting the  bottom inflow hole, it will absolutely influence the inflow direction on the top.

All in all, the playability of this atomizer is slightly higher with nice stability. Especially the changing of the inflow direction can  produce a better flavor. Moreover, the fact that it can be changed into the form of RDA also add fun to it.

Skills for using:

Next comes the skills for using. There is no need for us to regard the oil tank at the bottom of RDTA as the oil tank of RTA. There are several factors for my viewpoint. First, due to the structures of many RDTAs, if the cotton is too long, it will be hard to put in the cotton, and it’s easy to involve the cotton end into the screw thread. Second, if the cotton is too long, it will influence the speed  and volume of oil deflecting. Third, the cotton itself will occupy the space of the tank (Also the oil remnant on the cotton will also result the waste of oil, and many other problems as well.  )

Thus, we can only regard the oil storing space below the electrodes as a portable oil filling system. As regard to the building of coil, we can completely copy the way how we build coil on RDA. The only difference is that the reserved length of the cotton should be longer on the RDTA. In this way, we can assure that the cotton ends could be inserted into the oil tank completely and that the leaking problem could be reduced.

Experienced RDA players can easily feel the remnant. When you feel that the oil on the cotton is not sufficient, you can invert the atomizer (When there is enough oil in the oil tank, you don’t have to invert the atomizer. Since that when you are vaping, the atomizer is tilted. The oil will naturally fill into the coil through the cotton) to make the cotton end touch the oil.  Only two or three seconds are needed to fill enough oil into the coil.

Article Source:Remark on Five New RDTA and Skills for Using 

Recommended Products:

What is your most fashionable ecig in your stock?

Ecigs to vapers are what lipsticks to girls. How many ecigs you have in stock?

And what is the most fashionable ecig you have?

Fashionable in its appearance, Joyetech eGo Aio Starter Kit is liked by many youngsters. The designer endows this stunner ten colors in total , four with different crackle patterns and the other six are brushed gunmetal, wood, chinoiserie,  brushed bronze, dazzling and camouflage.

eGo AIO applies all-in-one style with atomizer inserted inside, looking like a pen and similar to the Smok Vape Pen Plus in shape. They are both convenient to use. Though petite, eGo AIO is powerful enough to produce vapor.

Though eGo Aio is pretty in its appearance, the designer also attaches great importance to its security, proving that the designer is quite practical.  eGo Aio applies  dual circuit system, realizing overall battery protection of over-charging, over-current and over-discharging, which makes eGo Aio more advanced and reliable. The atomizer cap is equipped with child lock so that one should press the cap to screw or unscrew the atomizer cap.

It comes in two ways, the standard Kit and easy package, appealing to different needs of different vaping people.

Vaping friends really should keep an eye on Urvapin’s online shop!  Don’t miss on it! If you have any question, you can leave your comments below!


Article Source:

Recommended Products:



Usage Experience of Tesla Terminator

New Vapers check out the device we are going to talk about today —Tesla Terminator!  

“What wattage should I choose?””What voltage should I choose?”

In the daily communication, new vapers usually have such questions. In spite that vapers are free of the trouble to build coils when using the finished coils, they still have confusions on choosing the wattage.

Surely, there are lots of cigarette alternatives applying” fool-style operation”, but most of them are positioned as “cigarette alternative” and adopt designs that can not be compatible with other atomizer devices. Today I will share a starter kit from Teslacigs with you guys. You don’t need any basic knowledge to operate this starter kit—.



The Tesla Terminator Kit adopts white roll-shaped package. In the package, there is a terminator box mod, a finished atomizer, a spare glass tube and sealing rings, spare finished coils, a USB cable, a certificate of qualification and separate instruction books of box mod and atomizer.

The Terminator box mod is supported by a single 18650 battery. Though its size is compact  with only 80*36.5*22mm, it still features the same strong industrial style as Tesla Invader 3.  Compared with Invader 3, Terminator has an extra 2A fast charging and supports vaping while charging. In using, it is more human.

It is said officially that the box mod is painted with black metallic paint and comes in four colors. At the two sizes of the box mod, there are heat emission holes connecting directly to the compartment. There are LED indicator lights and USB charge port on both sizes (beside the TESLACIGS LOGO). The compartment cover is carved with the TERMINATOR LOGO and the five convex lines on it  which can add the friction force of the hand and can also play a role of decoration.


When you take a full look at the Terminator, it’s not hard to find that there is only a fire button on it. The silver-lighted fire button is somewhat incompatible with the body. The operation of terminator adopts the “machinery concept “. Your operation only need a fire button and the mod will automatically match output wattage for you.

The 510 thread is silver-plated. At the bottom, there is carved with relative information, max 90w, supports 0.1Ω, designed by Teslacigs, input 5V-2A.

The well-made compartment utilizes the combining form with strong magnets. When you open the cover, you can see the negative and positive signs (if the batteries are not installed right, the box mod will not be able to turned on normally.) Though the box mod is not equipped with the auxiliary bar to disassemble the battery, there is a sunken slot at the X position. Vapers can use fingers directly to get the battery out easily. There is no connection gap between the compartment and the cover, but slight wobbling appears sometimes.

Terminator is a box mod features single 18650 battery. It has stronger generality than the ordinary cigarette alternative and can connect any atomizers with 510 thread. However, if the diameter of atomizers are equal to or bigger than 24mm, the edge will be exposed. Picture above is a RDA of 24mm.

The matched finished atomizer is also named Terminator. The structure and style are both very similar to the previous Captain and Blade made by Teslacigs. From the  Glass tube, you can see the huge filling hole of the finished coil. There are four such holes in total. For testing, I fill the tank with 60% VG oil fully and stand it for a night. It was found that only slight oil frying appears and no leaking appears.

Terminator Tank is still the ordinary structure of TESLACIGS RDTA atomizers. The coil connects directly to the top cap. Such structure decreases the length of the vapor flue and makes the vapor get into mouth through a shortest journey. In the light of the workmanship of the atomizer, there is no big problems. However, there is no burs on the black sealing ring at the bottom of top cap, but you might have a not very good hand feel.

The popular gold-plated electrodes are very common, while this  unique TESLACIGS brand uses the silver-plated electrodes. When you disassemble the atomizer, you will see just several parts (not very many) which is convenient for cleaning. After you finish a tank and want to clean it, you can disassemble the coil and wipe the condensed liquid inside the base with tissue.

The terminator atomizer adopts the top filling system. The official instruction book suggests that the air inlet be closed before opening the top cap for filling.  The inflow of the atomizer is positioned by a post. When you look into the inside of the airflow hole, you can see there is a buffer space. In actual use, the  suction resistance of this atomizer will not be to empty. When the inlet hole is half closed, the feel of suction is very comfortable.

In the light of flavor, the reducing capacity of the oil by using the 0.2Ω coil is very satisfying. The overall reducing degree is very even. For example,  when you use the fruit oil flavored mint blackcurrant,  this atomizer will not amplify the flavor of mint, neither the sweet flavor of blackcurrant. All the flavors are very even.

There is no ignition delay. The simple single button operation is really basic. On the instruction book, there is the detailed information introducing the instruction lights. It can instruct the remaining capacity of battery and malfunction by different colors and glittering.

In the light of the atomizer of Tesla Terminator, there is no leaking problem and the oil deflecting speed is also satisfying to most new vapers.

Secure Link: 

Recommended Products:

“Mech Mod Users”—Reviews on 5 Mods of Teslacigs

With its unique output mode, short delay, stable and secure functionality, and easy-to-operation, Semi-mech mod has always possessed a unique position in the market of ecig mod. Teslacigs has never stopped its research and innovation on mec mod. Here, I’m going to review the history of Teslacigs’ evolvement with you guys!

Looking back to the history of Teslacigs’s products releasing history, it seems that since its first built-in mod Stealth, Teslacig has gone far on the road on Semi-mech mod, from the initial chip voltage-stabilizing mod, step to step, to potentiometer-regulating-voltage semi-mech mod.

Let’s start from its first built-in voltage-stabilizing mod Stealth!

Teslacigs Stealth

The built-in design conception of Stealth is not originated from Teslacigs, but this Stealth Kit is the real one that brings this design conception to such a situation.

Teslacig has compressed the atomizer and mod to a much smaller size, giving the mod a size of 7(height)*5(length)*5(width). Only one hand can grab the whole body of the mod, a very mini feeling. Rubber Paint brings fine and smooth hand feeling, combined with tiny mellow and full arc and fine workmanship, making the hand feeling of this mod a bright spot.

The most important point, also the theme of this article “constant voltage output”, since it features the mech output mode, the mod has  no  other buttons other than the firing button, no screen either. Which is very easy for operation. Combined with the Kit-matched atomizer, the mod can give a very good usage experience.

The other feature of the mech-styled output mode is that it is easy to ignite  and the explosion time is extremely short, which is another plus index for user experience. Of course, the output mode of constant voltage is very unique. The specific output power is decided by the resistance value of the coil, calculation formula U²÷R=P, which can give the atomizer a constant output. However, the atomizer of Stealth is configured with the 316 stainless heating coil. The resistance value of the 316 stainless steel heating coil will increase gradually with the rising temperature, thus resulting a curve output. The low temperature on ignition results a low resistance value, accordingly bringing strong current and rapid temperature rising. When the temperature rises to some extent, the resistance value will increase and the current becomes weak, consequently the output power is lowered.

Teslacigs allocates this atomizer with two finished coils, 0.28Ω and 0.6Ω. The 0.28Ω coil can bring huge vapor and the 0.6Ω coil can be used for small air inlet. They are fit for different users with different habits. This mod can support a minimized 0.1Ω coil and can match up to most RDTA tank with the capacity of 22mm. But the appearance design of the mod decides that it can match up with most of the 22mm RBA. But the design of the mod has decided that it cannot match with the RDA and RDTA atomizer which is very pitiful.  The battery capacity is also the short slab of this mod. After all, you can not sell the cow and drink the milk. When owning its small size, you can not ensure that it will have a long battery endurance. Its battery capacity is 2200mah, which is equivalent to a Sony C4. However, with the charging current of 1A, it will only take 3 hours to charge the mod to the full, which can be a makeup to its battery durance.

 Teslacigs Invader 3

Since the first two generations of the Invader styled with the wooden gunstock shape didn’t appear in the inland market, I can not find a way to review on them. Let’s start our review from the third generation! The Teslaecigs Third Generation can be regarded as the masterpiece in all the semi-mech devices. In the situation that ecig mods develop rapidly, after nearly one year competition in the market, with its violent output, simple operation and rapid response, the third Generation is still popular among the vapers, becoming a symbol representing semi-mech ecig mods in Chinese vapers’ hearts.

Except for its constant voltage box, this mod is also equipped with a setting of potentiometer, which can adjust the voltage in some extent. In this way, the output mode is not single voltage output. The user can adjust it to a  proper mouth feel and vapor volume. The potentiometer can separate the voltage into 5 gears and it’s pretty easy to operate. Moreover, the operation mode that clicking the ignition button five times continuously to start the mod can also well avoid the mindless touch  on the ignition button when carrying with it.  Meanwhile, it features fast ignition bringing by mechanical power supply and rapid explosion, together with the lowest voltage 3.6V to the highest voltage 6.6v, making the violent output of this mod to a stunning degree!

This third generation Invader adopts a design that dual batteries in series connection, when increasing the voltage, it also increases its battery durance. The durance of the dual batteries are pretty good, and the endeavor is made on the matching of the mod body and battery compartment. Among the dual batteries mods, the body of this mod is pretty mini.

Of course, this mod is not that perfect. The baking finish is not strong enough to resist heavy abrasion and is easy to get abraded. And it is not harmonious to have a 22mm atomizer built on it. Moreover, the user can not know the battery reserve accurately except guessing, and the body is also heavy.  Apart from it has so many weakness, but its excellent performance and performance versus price ratio make this mod a big success!

Teslacigs three 150w

Teslacigs three mod is a mech mod with protective chipset. On hearing its name, you might think it’s the same mod as Invader 3, and in the ecig field, these two mods are always compared. Actually, their working mode are totally different! The Invader 3 adopting the  potentiometer structure can achieve the effects of increasing voltage and stabilizing voltage output! While, the output of Teslacigs 3 totally depends on the voltage of the battery. That is to say, the output voltage of this mod is the same with 18650 battery. Theoretically, the highest voltage is 4.2V, thus in the natural output of the battery, the real output will decrease, approximately 3.7V. However, the Invader 3 can reach the highest to 6.6V, thus, the performance and mode of the two mods are different fundamentally.

Also because of the output mode, it’s not proper for this mod to use the fancy coil made of ordinary A1 heating coil. Since the fancy coil of the A1 heating coil is featured with slow heating, and the mechanical output is relatively fixed and cannot make the coil heat fast just like the variable voltage mod by setting output curve or directly adjust the output power up. So, if the user wants to use the fancy coil,  a preheating process is needed to  achieve good effect. But in this mode , if the user uses the simple-structured and low resistance coil, it can perform pretty well, fast response, rapid explosion and huge vapor.

This mod uses the built-in battery, the capacity of the battery is 5000mah.  The highest charging current is 2A. When charging with an 2A charger, it only takes 3 hours for the battery to be full charged. Also, the most important feature of this mod is that it can be used as a power bank when other electronic devices are out of power.  Try to think that

when you are outside by yourself, what are you going to do when your cell phone is out of power while you are using the navigation. At this time, you can take out your ecig and connect it to your cell phone with a USB, then all the embarrassment is soon solved.

So, The advantage of this mod is its simple operation, no delay, low resistance explosion, long battery endurance, LED battery indication light and the power bank design, which are the unique features of mechanical mode. The weakness is also relative, the battery is irreplaceable, the output of the high-valued resistance doesn’t perform well, the fancy coil needs preheating, the mouth feel cannot be adjusted by adjusting the output and etc.  All in all, this mod fits well for the lazy people and inexperienced vapers.

Teslacigs Stealth Mini 

This mod is the compact version of the Stealth. On the basis of the original handy mod, this mod is further compressed to an extent of 4(length)*2(width)*6.5 (height). The coating is changed into painting, together with the round body, bringing this mod a very good grabbing feel.

The compressed body of the mod results that this mod can only use the matched original 16.5mm atomizer. The oil tank is only 1.5ml, the matched atomizer is a SS316 coil of 1 Ω, which is more inclined to the mouth feel, thus it can match with the matched atomizer of this mod regarding to the oil consuming of this mod!

The compressed body also brings imperfect performance. The maximal output current is decreased from 40A to 16.5A, and the battery capacity is also decreased from 2200mah to 1300mah. Even if the body is compressed, it can match up with the matched coil of the atomizer. And as regard to its endurance, the high resistance means low battery consumption, the actual endurance time does not shrink obviously.

Teslacigs Nano 120w Box Mod

This mod is a new release from Teslacigs. It’s an elegant mod with a special design. The pattern engraved on it gives it a very solemn industrial feeling. The metal-looked body weighs very heavily, totally 250g, not easy to carry around!

Different from other traditional mech mods with click buttons, Tesla Nano features a on-off switch, which is both secure and convenient, no need to worry about hit it by accident.

With an OLED screen, it is easy to monitor the wattage and battery capacity. This mod is not chargeable, instead, it has to be supported by two 18650 cells. The Max Output Voltage is 9v and the Max output current is 35A. In the VW mode, the resistance can lower down to 0.1 ohm, creating huge vapor. This mod is also different from the traditional box mod with a Taste Mode, 4 modes in total, norm, soft, hard, user.

With its multifunction, Tesla Nano 120w is much applicable to those ecig players.


According to these five mech mods, we can find the features of Teslaecigs products. The Teslaecigs products are separated into two parts, one is oriented to the ecig players, and the other part is oriented to the smokers who wants to get rid of smoking or find the substitute of cigarettes.  The products oriented to the players is gifted with pretty strong performance, more adjustment and using space, and comfortable operation experience.

The products designed for the smokers are simple for operation, can provide stable experience to users,  features with handy volume and comfortable grabbing feel.  I must say, such designs are much close to the original intention of ecigs. Ecigs were born for quitting smoking and replacing cigarettes. Nowadays, many devices when equipped with good performances and variable operation modes, they are also added with many complicated operations for using and too big volume and heavy weight.

These devices are OK for the players, but for those who only needs quitting smoking and replacing cigarettes, they are too complicated. On this basis, it is actually not good for the promotion and propagation of cigarettes. Especially in the situation inland, many elder smokers have bias to ecigs. The expensive prices of the high-end mods can scare people off, huge vapor easily leading people to think the bad side, complicated operation makes it hard for people to use it. DIY is also another problem that increasing the operation difficulty. All these can hinder the promotion to these people. So, actually these high-end mods can be only used in the player groups.

For promotion, we actually need those ecigs that are easy for using, can provide excellent experience for users and are portable.  Personally, the polarized concept of Teslaecigs are pretty good.  In one way, it satisfy the needs of the players, in another way, it can promote VAPE well and make more people envisaging and understanding it.

Article Source:  “Mech Mod Users”—Reviews on 5 Mods of Teslacigs


Recommended Products:


Coolvapor Lava RTA Atomizer reveiw

With the development of the ecig industry, many creation groups constituted by ecig players gradually emerged. They are full of enthusiasm to summarize the accumulated usage experience of devices and collect them together. Then based on the same design model and in the name of an independent group, they will launch some strong-targeted products.

The Lava RTA shared today was launched by a rising research team named Coolvapor. What a Lava Rta this research team constituted by experienced players and professional ecig practitioner will bring to us? Let’s move forward!

Lava Rta adopts a brief package,  and the brown paper sealed by a rope gives the package a slight of retro feel.  Apart from the sign of Coolvapor  and the QR code of the Official account, the side face is printed with a  diagram of the sectional structure.  When you open the package, the first thing into your sight is an scratch card with anti-counterfeit label. It is said that this scratch card can be used for the lucky draw and the gifts include Iphone7, limited Lava Rta as well as some other attractive stuff (subject to the final confirmation of the official information)

Apart from the Scratch card mentioned previously, when you open the package, you will also find a very intimate Chinese manual, which elaborates how to use the atomizer, how to make the heating coil and the detailed structure of the atomizer. The spare seal ring, Allen Key, glass tube and atomizer are fastened separately with dense cotton.  The reason why there is detailed description on the package is that before you use he Lava Rta, he or she can feel the full sincerity of the ground breaking work from all its aspects.

It features a diameter of 24 MM and there are two colors for choice, the SS original color and the electroplating black.  The brief straight outlook is matched with the short bold POM drip tip, and the slash on the side face can rightly echoes the strokes of its name LAVA. From the perspective of its outlook, the good looking of this RTA can please many players. No matter it matches the box mod or mech mod, it is pretty in both ways and appealing to the eyes!

The POM drip tip with big diameter conforms to the conception of integration. The cap on the top is made of POM materials and the lower part is made of SS metal gold.  The two parts are integrated into one and are inseparable. The one with the match color of SS metal gold can be clearly distinguished between the two materials. The drip tip adopts an incision of slope angle, giving the shape of the atomizer a strong feeling. During using, no condensation situation appears.  From the bottom, you can see the design mark of the group  and the serial number of the atomizer. The protrusion length of the gold-plating electrode can drive the mech mod securely and the overall workmanship is excellent.

The air inflow adjustable ring can be dissembled separately.  Structurally, it can make users to associate it with the radiant PETRI RTA released a  while ago.  And in the inner side of the bottom inflow adjustable ring, you can see the bayonet and the groove. The groove is convenient for positioning the base thus for applying force to dissemble them. The slot is speculated to have two usages. The first one is to give the adjustable ring a comfortable sense of damping, and the second one is to avoid leaking of air after closing the intake.

After you dissemble the atomizer, you will see the bottom part is a split type. It soon makes you to think of the Petri Rta which needs loosening and fastening the electrode screw, and the Pico Rta which needs to lock the ring on the unfixed split base and some other troublesome operation method.

But after the practical usage experience, we can find that the Lava Rta needs an extra step, but the step has never caused a “irritating” using feel. It will be elaborated in details below.

The atomizer tube and the base are the structural core of Lava Rta. There is a groove in the inner side of the gold-plating atomizer tube, which is used for positioning the filling hole and locking the electrode for spin assembling and disassembling.

As regard to the workmanship and finishing degree, it is difficult to find the workmanship weakness of this atomizer, especially the damp is appropriate when dissembling and assembling the parts, and the size of the sealing ring are just right.

The electrodes adopt the most common style of two poles with four holes. The locking hole can just allow in an entwining rod with the diameter of 1 MM. The bottom of the LAVE electrode directly adopts the standard 510 connection, not very many complicated procedures brought by the rotation-typed unfixed base of PICO RTA and the unscrew/screw positive electrode screw of PETRI RTA. The electrode of LAVA RTA is separate from the base. Coil making  and burning can be operated on the510 connection thread which is for connecting the mod and work table.

The electrodes adopt the most common style of two poles with four holes. The locking hole can just allow in an entwining rod with the diameter of 1 MM. The bottom of the LAVE electrode directly adopts the standard 510 connection, not very many complicated procedures brought by the rotation-typed unfixed base of PICO RTA and the unscrew/screw positive electrode screw of PETRI RTA. The electrode of LAVA RTA is separate from the base. Coil making  and burning can be operated on the510 connection thread which is for connecting the mod and work table.

Before making the coil,  you can observe the structure of the top.  The “L” seal ring can fix the glass tube more effectively and reach a more effective cushion effect. And the filling seal ring on the top is also slightly different from the ordinary type. LAVA RTA uses the embedded seal ring and the other side is the “outer convex” metal. The two parts connecting together to form a close “valve”.

If the mech mod is adopted, the material of NI80 can be used for the coil. If the mod is of ordinary power, the material of A1 can be used. Since the coil making table is of limited space, we suggest that you

choose the coil with a diameter of 24G, the circle diameter of 2.5 and twist into 6 to 8 loops, thus to bring a balanced taste experience.

It’s worth mentioning that it’s also very simple to make the cotton of LAVA RTA, just trimming the cotton to the proper length and then put it in the cotton slot. When installing the glass tube, you can find the four filling holes are positioned very precisely by the groove. As long as the quantity of the cotton is not too little, leaking will not appear. When the cotton on the base is installed, you can aim the top part of the atomizer to the groove directly, insert it to the base and screw on the base.

Because of the sealing effect of the intake adjusting ring, there are completely no back flow in the process of using. To adjust the air hole has an obvious effect on the drawing resistance. The top lid is very thick, apart from its good insulation effect, biggest highlight of it is that you can completely put the drip tip of the atomizer much deeper into the mouth. In this way the huge vapor can reach the tongue tip directly, thus you can vape mouth-to-lung at your will. No matter the volume, the density and the reduction degree of the oil flavor, they can all give you a pretty good usage experience.

All in all, this LAVA RTA has a balanced performance on vapor and flavor. Excepting that you need to take one more step when making the coil, you can hardly find other weaknesses on its workmanship, reliability and taste. However, as a research team constituted by experienced players and professional practitioner,their ground breaking work can be really satisfying—endowed with good looking, but choose to stand out by functionality! Good both inside and outside is the feeling after using this LAVA RTA.

Article Source: Experiences bring out creation! Vape on with Cool Vapor Lava Rta!

Secure Link:

Recommended Products:


Stylish Vape Pen–Smok Stick V8 3000mAh Baby Starter Kit


smok stick v8/smok stick v8 kit/ smok stick v8 kit/ stick v8 baby kit

Brief introduction: Smok Stick V8 3000mah baby starter kit is the newest pen style starter kit from Smok.

Sometimes, I chat with vaping friends. Most of them agree that vaping can be a really cool habit in life. It’s healthier than smoking and can be a better cigarette alternative for the smokers. However, after you have deeper understanding on this device, you will realize it’s not only a alternative to replace cigarette. It’s actually a daily habit and a kind of fashion in life.

Recently, I have just had Smok Stick V8 Baby in my collection. After vaping on it for a few days, I have to say I really love it. Unlike other hefty ecig devices, this Smok Stick V8 Starter Kit is really convenient for carrying out. The only one button is pretty easy for operation.

Stick V8 is composed of the TFV8 big baby tank and the Stick V8 Battery. The TFV8  Big Baby tank features a juice capacity of 5ml, a medium level. The most unique design of Smok Stick V8 is its rotary filling system. When refilling the tank, you just need to screw off the drip tip.

The Stick V8 box mod adopts a built-in 3000mAh battery which is powerful and durable and can bring you massive cloud of vapor.  The voltage range is from 3.4v to 4.2v. Its charge time is about 2 hours and vape time turns out to be more  than 3-4 hours.

Last weekend, I was invited to join an outdoor trip. I was worrying about it might be boring there. So I grabbed this Stick V8 Starter Kit with me. It was during this trip that I thought this Smok Stick V8 Starter Kit was really suit for carrying out. When you go out,  you just put it in your pocket and when you need to use it, you just take it out and click the fire button five times to start vaping on. The 5ml juice capacity and 3000mah battery capacity can keep it operating for several hours.

In summary, this Smok Stick V8 is worth trying with the simple operation, especially the new vapers.  Most importantly, it’s a good ecig device to carry out.

Article Source:  Stylish Vape Pen–Smok Stick V8 3000mAh TFV8 Big Baby Starter Kit

Secure Link:

Recommended Products:


Preview of Wotofo Serpent RDTA

Hi, Vaping friends! Have you ever tried the Wotofo Serpent RDTA?  How is this new product? Let’s check it out!

Since the first RDTA emerged in the market, with its double oiling function, RDTA has become more and more popular in the vaping world.

Wotofo succeeds many strengths of the previous RDTA tank, and also optimizes the weaknesses. Most worthy of mentioning is that this RDTA is featured with dual filling  holes. Traditional RDTA only has one filling hole which is difficult for dripping and may squeeze out the cotton because of high pressure in the tank. Two filling holes can effectively avoid such problems.

The internal diameter of the drip tip is 8.5mm, which is for producing huge vapor.

The tank can be dissembled in two ways, daily dissembling for using, entirely dissembling for cleaning.

On the construction plate, you can build the coil and cotton. The atomization warehouse is very compressed to produce good-tasted flavor.

In the package, there is an atomizer, glass tube, heat-insulated drip tip, manual, a T-shirt card for exchanging for a T-shirt. Besides, the spare parts are very bountiful, a pack of heating coil,  a pack of rings and screws, a pack of cotton and a cross screwdriver.

What box mod do you think can match this Serpent RDTA? Leave your answer and reason below.

Article Source: Preview of Wotofo Serpent RDTA

Secure Link:

Recommended Products:

How do you like to DIY the Icon Box Mod?

How to DIY an ecig? Or do you ever want to own a personal ecig?

CKS Technology has just released a fancy design of Icon Box Mod. If you don’t remember, the Skull pattern on it will remind you of this unique box mod.


It seems the designer shows much partiality to the man vapers.  ╥﹏╥

Functionally, CKS Icon is a temperature control box mod with the control ranging from 212°F to 572°F or 100℃ to 300℃. It features a VV mode, output voltage ranging from 1.0v to 9.5v.It is supported by two 18650 batteries and the package is loaded with a USB cable. The battery compartment is slidable.

Personally, the functionality is quite appealing to me. If only the color could be more girlish!   (个_个)  How do you like it in this way? Ms and Mrs?

If the designer had a girlfriend, he might want to present it this way.  (ಥ_ʖಥ)

One vaper at home brings misunderstanding, two vapers at home make much of fun and communication. Why not buy a pair of them and DIY one of them to vape together with your spouse or would-be spouse? Vaping is fashion with no harm rather than bad addiction.

Let’s DIY CKS  Icon box mod together!

Article Source: DIY Ecig? How do you like to do it?

Recommended Products:


Simple refilling and Best Wicking–Review of Alpine RDTA

Alpine RDTA
Alpine RDTA

Entering the second season of 2017, the RDTA structured products are largely thrown to the vaping groups after the stagnation in last year. A large quantity of new RDTA emerged in the market. Echoing to development tide of RDTA tanks,  Syntheticloud company recently launched a RDTA, named Alpine RDTA, which is a RDTA of 24mm diameter with top and bottom airflow holes. Here below I will bring you guys the usage experience of this RDTA.

Alpine RDTA
Alpine RDTA

It is packed in an Acylic box. The sign of SC company and the atomizer can be seen clearly. At the bottom, there is labeled with some product information concerning the atomizer, for example, central fill, 3ml juice capacity, 24K gold plated internals and so on.

Alpine RDTA
Alpine RDTA

Simply in the light of appearance, Alpine RDTA still remains the appearance features of AEOLUS RDA.  There are no heating coils suggested by the official. Except for the atomizer, there is only the spare o-rings, electrode screw and glass tube.

Alpine RDTA
Alpine RDTA

To a large extent, the top airflow hole represents the series of AEOLUS RDA. But on the Alpine RDTA, you can find air inflow hole at the bottom. Generally, concerning air inflow holes like this both on the top and at the bottom, the bottom air inflow holes plays a main part and the top air inflow hole part plays a secondary part. In a greater extent, the top airflow hole plays a role in assisting the heat dissipation.

Alpine RDTA
Alpine RDTA

The daily disassembling is divided into six parts. The upper parts are the electro black ones and the lower parts are the electro gilding ones. The lower parts is very convenient for the daily operation. Under the situation that the glass tube and the bottom parts are not installed, you can also make the coil and heat the coil. And after you fill in the cotton, you can scatter the cotton and then install it back to the glass tube and the base parts.

The drip tip connects the air inflow slot. At the connection of the drip tip (POM) and the top cap (medal), there is no o-ring to produce damp. The top parts open totally with six round air inflow holes. Between the two lines of inflow holes, you can see the “plug”of the filling hole at the vapor entrance. In the using of this atomizer, the top of the glass tube can easily collect the condensate liquid. Every time when you finish the oil in the tube, you will need to clear the tube with tissue.

Alpine RDTA
Alpine RDTA

Totally, there are three components on the gold-plated plate, and the gold-plated plate has a “L” inflow  at the bottom.  You can see the filling post in the middle connecting to the juice tank at the bottom, and the “plug”of the top cap assures the bubble-tight closure to the flow. I believe,  such reliable and simple operation for refilling will be adopted by more RDTA manufacturers.  Namely, homogeneity will still appear.

The dual posts, cross-screw for locking the coil, the opening degree of the coil-locking hole shows that this RDTA can be compatible with the fancy coils. But in the light of the span of the bottom inflow holes and the space between the refilling holes, the designer seems to have limited the width of the fancy coil a little bit.

Under the tide of Clapton heating coil, according to the samples released by the official, you can see many high-end Clapton coils are used on this RDTA. Based on actual usage and from the angle of simple purchase, the 24G, 26G,38-40G Clapton Coils are used the most. The usage experience will be depicted at the end of  this article.

The A1 traditional single coil user can choose the 22G Coil. Using 22G coil on this RDTA can produce better original oil flavor than the 21G and 24G coils can do.  All the G points will only appear on the condition that the top inflow holes are closed completely.

After actual use of the Alpine RDTA, I feel it not only keeps its traditional design of top inflow, but also adds bottom inflow. Such design brings more playing methods to the coil choices to this atomizer. However, whether the top and bottom inflow holes need to be opened at the same time or how to be allotted, much reasonability is needed.

  1. Using the top inflow and bottom inflow separately, 90% players would choose the single bottom inflow. Thus, the method of single top inflow can be excluded.
  2. When playing the role for assisting lowering the heat, top inflow can help to lower the heat, but unavoidably it will have an effect on diluting the flavor of the oil and the density of the vapor. Such as the Clapton coils mentioned in the previous text, after 4 or 5 mouths of inhaling, you will feel the atomizer is heavily hot. After you open the top inflow hole to lower the heat, the heat can be well controlled, but the density of the oil and vapor will be greatly reduced.
  3. Using the traditional A1 coil of 22G can reach my best G point, on condition that the top inflow hole is closed. On such condition, this atomizer shows smooth resistance, the flavor of the oil can be restored evenly. After using for a while, the bottom part of the top cap will accumulate some condensed liquid and will need to be cleaned. Except for this, there is no other obvious defects.

After building the coil, I put in the wick and cut it off to a proper length.  Then I put the ends into the holes on the plate and use the tweezers to fluff the wick a little bit. Personally, the wicking technique of this Alpine RDTA is really impressive after my try on it.

In summary, the appearance of this Alpine RDTA can be matched with nearly all tanks. The appearance of this tank can cater to many players. Regarding to the inflow design of this tank , the single bottom inflow playing method can be better than the mixed top and bottom inflow playing method. The top refilling system is a very good example for RDTA and the wicking on this tank is the best!

Article Source:  Usage Experience of Alpine RDTA—Simple refilling and Best Wicking!

Secure Link:

Recommended Products: