Tesla Invader 2/3 Box Mod Review—Multi-functional Voltage Scheme

Tesla Invader 2/3

Tesla Invader 2/3 is the latest creation from Teslacigs Invader series. It has been upgraded entirely, no matter its performance or functions, they both have been improved largely. Of course, its appearance is also improved. The most special part of Tesla Invader 2/3 box mod is its setting of the battery scheme, which can switch between dual-battery system and triple-battery system.


Tesla Invader 2/3

The package succeeds Teslacigs’s style, adopting the hat box made of paper. In the front side there is printed the brand LOGO, name of the box mod, features of the box mod and the lateral view of box mod.

At the right side of the package box, there is the instruction picture showing how to change the battery.  At the left side, there is printed the words “powerful & simplistic INVADER 2/3”. At the back side, there is the product instruction information. The most information surely is the anti-fake label.

The content of the package is also very simple. There is only one box mod, a piece of battery cover for dual-battery scheme, a manual, a drawstring of battery, warning card and certification (Supplementary Instruction, there is protective film both for the box mod and the battery cover.)


Tesla Invader 2/3

Under the triple-battery mode, the appearance is similar to most box mods that adopt triangle layout to batteries, which is accorded with the ergonomic design on appearance and has very nice hand feel. On its design of appearance,  Tesla Invader 2/3 succeeds the style of Invader 3. It’s angular but is also featured with round curve. At both sides of the box mod, there is a “X”mark respectively, and at the lower part of the box mod, there is a piece of skin made of carbon fiber and the name  Teslacigs.

Tesla Invader 2/3

The fire button is settled at the upper part of the front side. Such design is very convenient for users to find the position of the fire button and gain a more comfortable usage experience. Below it is the adjust plate of the potentiometer and LED light.

Under the dual-battery scheme, the size of the box mod is compressed largely, but the comfortable hand feel is by no means lowered (even improved slightly).

Tesla Invader 2/3

Let’s make a comparison between Invader 2/3 under dual –battery scheme and its predecessor Invader 3 (the size of Invader 3 is relatively smaller among dual-battery box mods). Apart from that it’s much thicker than Invader 3, its height and length are both smaller than Invader 3. Regarding the color, Invader 2/3 has more choices for color and the color matching of each box mod is proper.


Tesla Invader 2/3

In the manual, there is the information of the unit resistance 0.1Ω and the corresponding output wattages at different gears, but there is no detailed information of output voltages. Here I will show you the data that I have tested with instrument.

Tesla Invader 2/3

In the pictures, you can see the voltage values at 1/3//5 gears under triple-battery scheme, first gear-3.08v, second gear-3.46v, third gear-4.15v, fourth gear-5.59v, fifth gear 8.29v ( rough data.)

Tesla Invader 2/3

In the pictures above, there are the voltages at 1/3/5 gears under dual-battery scheme, first gear 3.07v, second  gear 3.46v, third gear 4.27v, fourth gear 5.41v, fifth gear 8.06v (rough data.)


Tesla Invader 2/3

The workmanship of the battery covers in the package is pretty good, and at the two sides of the bottom, there are nine heat emission holes respectively.  Inside of the battery cover, there are circuit connection points (the battery cover under triple-battery scheme is connected by the batteries ). When the battery cover is not closed completely, the box mod will not be energized.

Tesla Invader 2/3

Under triple-battery scheme, the connection points of the battery cover and the connection points of the battery both adopt the treatment of silver plating, adding the current conveyance rate and the antioxidant ability.

The lock for locking the battery cover and box mod is very carefully designed. The battery cover and the box mod is connected by a groove structure. At the bottom of the box mod is the positioning structure of the battery cover which can well fix the battery cover. The integrating degree of the groove is pretty high without loosening or shaking.

Tesla Invader 2/3

The workmanship inside of the compartment is also impeccable. The elastic force of the silver-plated connection points and the circuit connection points are both strong with comfortable operation experience.


The 510 connection point is upgraded with a bigger contacting area which can improve the current conveyance rate, but the firmness of the paint is not so satisfying.

–Actual test—

Tesla Invader 2/3

I use the Geometry RDA tank to test the output, the data  as below: Kanthal A1 coil, wire diameter 0.6, circle diameter 3, 6 circles, 4 coils and the resistance is 0.12Ω.

Pictures above are the output test situations under dual-battery scheme at 1/3/5 gear.

Tesla Invader 2/3

Pictures above are the output test situations under triple-battery scheme at 1/3/5 gear.

From the pictures above, we can see the difference between dual-battery scheme and triple-battery scheme. Under triple battery scheme, the output is obviously more fierce than that under dual-battery scheme. By comparison, we can know that this box mod has a relatively big limit to the current (after all, the wattage calculated by a 8.29V voltage and 0.12Ω resistance can reach a horrible value of 572wattage ).


Tesla Invader 2/3

The operation mode still succeeds the style of the Invader series—click 5 times continuously to turn on the box mod,  and the LED display screen as well. The adjustment of output is also very easy and simple for using (Start from the lowest gear, if you think the output is too weak, you can adjust it to a higher degree; if you think the output is too fierce, you can adjust it to a lower degree.)

The adjustable voltage of this box mod is very user-friendly to the new players. With it, new players can control the time to adjust the coil when burning the coil.

Tesla Invader 2/3

If the paint can be much firmer with strong abrasion resistance ability.

The switch of the dual-battery and triple-battery is extremely easy. Users don’t have to disassemble the redundant battery on the battery cover, but just to change the battery cover.

Tesla Invader 2/3

Here I would like to revise a conception. We are used to call the VV box mod “semi-mech”box mod.

However, this is not always accurate. After all, at the very beginning, the semi-mech box mod was just added protective chipset on the mech structure, but was not really featured with the function to adjust the output voltage. Later, the box mod installed with potentiometer appeared and its voltage was adjustable.

But people are still accustomed to call it semi-mech mod. Actually, the voltage of it can be adjusted, so it’s not right to call it semi-mech box mod. The right way to call it is VV box mod.


Tesla Invader 2/3

To sum up, the output and workmanship of this box mod has made great improvements compared with its predecessor Invader. The only point needs to be improved is the paint.

On the other side, for those vapers who likes to DIY the appearance of the box mod, Tesla Invader 2/3 is a very good choice for them. The can easily erase the paint and then process the shell with customized treatment, making it more unique.

Personally, I like the box mods adopting potentiometer. They have the features such as fierce explosion, fast ignition, easy for adjustment. Thought it doesn’t has the TC function, it makes the best on the output voltage.

Tesla Invader 2/3 box mod will satisfy your vaping need well. You can totally enjoy 38% off if you make the purchase now!

Relative Shop: www.urvapin.com

Recommend Products:





Smok Qbox Review

Recently, the ecig manufacture  tycoon Smok has released a portable kit named Q box. It has a compact size and multiple cute color schemes. This Q (short for cute in spoken language) is the role that we are going to talk about today.

Inside of the package, you can find the user manual with detailed instruction. This Q box has two different versions of tanks, the one for users abroad with the TFV8 Baby Tank and the one for users in China with the Smok Spiral tank. The kit we introduce here is with the TFV8 Baby Tank.

The bill of material in the package is consistent with the standard package of the Smok products, USB cable, Q Box mod, TFV8 Baby Tank, user manual and a spare 0.25Ω coil and other spare parts.

The atomizer is dealt with electroplating treatment and the paint on the QBox is the stoving varnish. Since the size of Qbox is small by 54.5mm*33.5mm*25mm,there will be a feeling of the head is heavy and the feet is light when it matches the TFV8 Baby Tank. Personally, I prefer to match this mod with single-coil RDA.

Similar to the other box mods of Smok, QBox is also featured with the standard functions—Temp Control, TCR and other modes. The only weakness is that the highest output watt is 50W. QBox is supported by a built-in 1600mah battery.  Under the watt mode, it can support the resistance lowest to 0.1Ω.  As regard to such a compact box mod like QBOX, its performance is impeccable, and it’s very convenient for carrying around.

From all the angles of the box mod, you can see clearly the positions and workmanship of the buttons. And it still uses the big screen to display the data. Beside the five heat emission holes, there is the USB connector. This connector is positioned at the bottom which has blind spot for using. For example, when the box mod match a RDTA, it cannot be charged in an upright position. It’s because that if the RDTA is put down on the side, it will leak. Thus, trouble will be that the user have to screw off the atomizer and then charge the box mod.

The 510 connector still conforms to the style of Smok. There is no independent connecting plate and scratched can appear when install the atomizer. On the positive side, the connector of Qbox can be perfectly compatible with 24mm-diametered atomizers without gap. Below the adjustable buttons of “+”and “-”, there is a RESET button, with which user can restore the procedures of the box mod to the factory settings.

Featured with a small size, accordingly , this box mod can be easily misunderstood as a weak-output box mod. I install a RDA of 0.23Ω on the box mod and set the output to the highest of 50w.  The performance of QBOX is very satisfying with no obvious delay or insufficient capacity. However, limited by the highest output of 50W, it is not suitable for Qbox to match an atomizer with too low resistance.

Maybe some vaping friends might think the battery capacity is too low and the maximum output limits the choice of atomizers. However, it is correctly positioned as a pocket-sized box mod and never appear in the market in the pose of main device. It is absolutely a best choice to take out on a short-distance trip. The high-resistance RTA, flavor-oriented RDA can be the perfect matches for QBox. In summer time when you wear thinly, light pocket-sized box mod such as QBox can be really of strong persuasion to you to take it away.

In summary,Smok Q Boxis a cute and portable kit. It can be the best choice for girl vapers to take to nightclubs.

Article Source:https://www.urvapin.com/blog/review-of-smok-q-box/

Relative Shop: https://www.urvapin.com/

Recommended products:





What is the difference between RBA, RDA, RTA and RDTA? 

RBA, RDA, RTA and RDTA, what’s all the about? Do you know how to sort them out?

Just like shopping for a proper pair of shoes for a special occasion, there is also need for you to know how to choose a proper tank to satisfy your personal need.

Small knowledge to share with you ~

From the usage, atomizers can be divided into two categories, the huge vapor oriented atomizers and the flavor oriented atomizers.

If you vape for replacing smoking, you can choose the flavor oriented atomizers. If you vape for playing and you like huge vapor, you can choose the huge vapor oriented atomizers.

Structurally, tanks can be divided into two big categories, finished atomizer and RBA.

Finished atomizers always comes with finished coils and come into two types, the huge vapor oriented atomizers and the flavor oriented atomizers.

RBA tank means you can build your own coil on it, including RDA, RTA and RDTA.

RDA is short for Rebuildable Dripping Atomizer; RTA is short for Rebuildable Tank Atomizer; RDTA is short for Rebuildable Dripping and Tank Atomizer.

Structures of different atomizers:

A finished atomizer is composed of drip tip, top cap, oil tank, finished coil and base.

RTA is composed of drip tip, top cap, atomization warehouse, oil tank, electrode base.

RDA is composed of drip tip, atomization warehouse cap, atomization warehouse and electrode base.

RDTA is composed of drip tip, atomization warehouse cap, atomization warehouse, electrode base and oil tank.

Suggestions for purchase:

1.Due to the fact that finished atomizers maintains the strengths of stable flavor and easy operation, they are more suitable for the new vapers or the vapers who don’t have the time or don’t want to build coils.

2.After a long time development, RTA starts to polarize into two directions. One is the mouth-to-lung RTA that focuses on the flavor of the oil. Another one is the direct-to-lung RTA that focuses on huge vapor and long duration time. The simplest way to distinguish them is size of the air inlet.

3.RDA also polarizes into two directions, one is oriented to the huge vapor and the other one is oriented to the flavor. Vapers can distinguish them by the size of the warehouse and air inlet. Generally speaking, the flavor-oriented RDA has smaller atomization warehouse and air inlet.

4.RDTA is equivalent to a RDA with a oil tank. Such design is to improve problem of RDA that it has low oil storage in the cotton.

After evolving for so many years, there appear various atomizers in the market according to the different requirements of the vapers. All in all, all the innovative structures aim at bringing better vaping experience to the vapers.

Article Source: What is the difference between RBA, RDA, RTA and RDTA?

Secure Link: www.urvapin.com

Recommended Products:





Review and Usage Experience of Limitless 200W Box Mod


Limitless 200w

Recently, Limitless company released a 200w high-powered TC box mod–Limitess 200w Box Mod. It is officially said that this box mod features three gears of explosion modes. It supports the minimum resistance low to 0.08Ω. Really few box mods can support the resistance low to 0.08Ω.

Limitless 200w

Limitless 200W TC box mod adopts the changeable side covers. Users can choose his or her favorable covers to decorate the box mod. The cover in the standard configuration are the ones showed in the picture with the logo of Limitless.

Limitless 200W

When you first hold the Limitless 200w, you must think this box mod features a built-in battery. Why? Because the width of Limitless reaches a length of 63.5mm. A box mod powered by dual batteries will in no way have such a big size.


But when you open the battery compartment, you will find this Limitless is really a dual-battery box mod. The pole pieces in the battery compartment are all made of the gold-plated materials which can assure electricity transformation to a large extent.

The resistance for installing the battery is at a moderate level.  The battery slots are not too tight.  Obviously, Limitless is made to be a “fatty. Its big size might bring surprises!

Limitless 200W

The 510 connection is adjustable and can match most atomizers.

Official Specifications:

The overall painting of Limitless 200w is very unique. It doesn’t adopt the layering such as the mainstream nacrolacquer but adopt the industrial uneven layering. On the surface, there are some raised granules. Such layering can give you a visual effect of thick industrial steel.

Its screen is like a mirror. Vapers may have countered the situations such as the screen not light enough outdoors, unclear screen, easy to be scratched. But after using it for few days, it’s not scratched at my hand. Moreover, unless the sunshine is especially strong, the screen is visible enough under normal circumstances.

The resilience force is at a moderate level. The costume  chip screen and its operation are both different to the mainstream box mods. The layout of the screen is comparatively simple without too much information. It only displays the actual wattage, memory groups, output gear, actual resistance and the output voltage. The battery volume is displayed at the bottom of the screen.  The memory groups are divided into three groups. The output wattage is adjustable in every memory group.

The operation guide and function interface introduction of Limitless:


How to enter into the function menu:

Press the fire button three times continually to enter into the locking/unlocking modes. Press the fire button five times continually to enter into the function menu. Press the fire button to switch between the options and press the adjust buttons to choose options.

Adjustment of the three gears of output modes: When you press”-”, the letter at the top right corner glitters. Press the adjust buttons to switch modes and press the fire button to choose the option.

Adjustment of memory groups and adjustment of output wattage: Press”+”, the letter M1 at the top right corner glitters and the memory group starts to operate. To change the wattage of the memory group, you only need to press “-”. When the display of wattage glitters, you can press the adjust buttons to adjust it.

Here comes the most crucial part! The resistance of Limitless can be lowered to 0.08Ω. The output wattage can reach 200w and the mod features three gears output. Obviously, the designer means to make it a huge vapor producer.  Besides, it features several protection modes which you can refer to the official instruction book.

You must have heard Limitless RDTA tank before. Today I will use this tank designed by Limitless to test the performance of Limitless 200w TC box mod. I build dual 22G/A1 coils of 0.17Ω on Limitless RDTA deck and use 80w at three different gears output modes to compare the vapor.

Maybe this can not reflect the violent output of Limitless. Next I will make a comparison between DNA200 and Limitless 200w under the same wattage but three different gears of output.

From the pictures showed above, we can easily see that under ST mode and PO mode, the ignition speed and vapor volume both  surpass that of DNA 200w. Only under the SO mode, the ignition speed is slower than the DNA 200.  It proves that the strength of this fatty Limitless 200w box mod.


The performance of Limitless 200w can well match its “fatty” body. The 200w output of its dual batteries in series connection is not inferior to DNA200 chipset box mod and even slightly surpasses its performance.

From the picture, we can see the fire button is paralleled to the panel and the button place is almost the same with that of many mainstream box mods. Personally, if the fire button could be at the Logo part on the top, it would be more comfortable to use. The side covers increases the play-ability of this box mod and “changing the decoration”can bring lots of fun to the vapers. Players don’t have to give up this Limitless 200W box mod when they get tired of the single color and patterns. I have to say this small design is of great usability.

Secure Link: www.urvapin.com

Recommended Products:




DIY Ecig? How do you like to do DIY the Icon Box Mod?

How to DIY an ecig? Or do you ever want to own a personal ecig?

CKS Technology has just released a fancy design of Icon Box Mod. If you don’t remember, the Skull pattern on it will remind you of this unique box mod.

It seems that the designer shows much partiality to the man vapers.  ╥﹏╥


Functionally, CKS Icon is a temperature control box mod with the control ranging from 212°F to 572°F or 100℃ to 300℃. It features a VV mode, output voltage ranging from 1.0v to 9.5v.It is supported by two 18650 batteries and the package is loaded with a USB cable. The battery compartment is slidable.

Personally, the functionality is quite appealing to me. If only the color could be more girlish!   (个_个)  How do you like it in this way? Ms and Mrs?

If the designer had a girlfriend, he might want to present it this way.  (ಥ_ʖಥ)


One vaper at home brings misunderstanding, two vapers at home make much of fun and communication. Why not buy a pair of them and DIY one of them to vape together with your spouse or would-be spouse? Vaping is fashion with no harm rather than bad addiction.

Icon Box Mod

Secure Link: www.urvapin.com

Recommended Products:





What is your most fashionable ecig in your stock?

Ecigs to vapers are what lipsticks to girls. How many ecigs you have in stock?

And what is the most fashionable ecig you have?

Fashionable in its appearance, Joyetech eGo Aio Starter Kit is liked by many youngsters. The designer endows this stunner ten colors in total , four with different crackle patterns and the other six are brushed gunmetal, wood, chinoiserie,  brushed bronze, dazzling and camouflage.

eGo AIO applies all-in-one style with atomizer inserted inside, looking like a pen and similar to the Smok Vape Pen Plus in shape. They are both convenient to use. Though petite, eGo AIO is powerful enough to produce vapor.

Though eGo Aio is pretty in its appearance, the designer also attaches great importance to its security, proving that the designer is quite practical.  eGo Aio applies  dual circuit system, realizing overall battery protection of over-charging, over-current and over-discharging, which makes eGo Aio more advanced and reliable. The atomizer cap is equipped with child lock so that one should press the cap to screw or unscrew the atomizer cap.

It comes in two ways, the standard Kit and easy package, appealing to different needs of different vaping people.

Vaping friends really should keep an eye on Urvapin’s online shop!  Don’t miss on it! If you have any question, you can leave your comments below!

Secure Link:www.urvapin.com

Article Source: https://www.urvapin.com/blog/what-is-your-most-fashionable-ecig-in-your-stock/

Recommended Products:






Usage Experience of Tesla Terminator

New Vapers check out the device we are going to talk about today —Tesla Terminator!  

“What wattage should I choose?””What voltage should I choose?”

In the daily communication, new vapers usually have such questions. In spite that vapers are free of the trouble to build coils when using the finished coils, they still have confusions on choosing the wattage.

Surely, there are lots of cigarette alternatives applying” fool-style operation”, but most of them are positioned as “cigarette alternative” and adopt designs that can not be compatible with other atomizer devices. Today I will share a starter kit from Teslacigs with you guys. You don’t need any basic knowledge to operate this starter kit—.



The Tesla Terminator Kit adopts white roll-shaped package. In the package, there is a terminator box mod, a finished atomizer, a spare glass tube and sealing rings, spare finished coils, a USB cable, a certificate of qualification and separate instruction books of box mod and atomizer.

The Terminator box mod is supported by a single 18650 battery. Though its size is compact  with only 80*36.5*22mm, it still features the same strong industrial style as Tesla Invader 3.  Compared with Invader 3, Terminator has an extra 2A fast charging and supports vaping while charging. In using, it is more human.

It is said officially that the box mod is painted with black metallic paint and comes in four colors. At the two sizes of the box mod, there are heat emission holes connecting directly to the compartment. There are LED indicator lights and USB charge port on both sizes (beside the TESLACIGS LOGO). The compartment cover is carved with the TERMINATOR LOGO and the five convex lines on it  which can add the friction force of the hand and can also play a role of decoration.


When you take a full look at the Terminator, it’s not hard to find that there is only a fire button on it. The silver-lighted fire button is somewhat incompatible with the body. The operation of terminator adopts the “machinery concept “. Your operation only need a fire button and the mod will automatically match output wattage for you.

The 510 thread is silver-plated. At the bottom, there is carved with relative information, max 90w, supports 0.1Ω, designed by Teslacigs, input 5V-2A.

The well-made compartment utilizes the combining form with strong magnets. When you open the cover, you can see the negative and positive signs (if the batteries are not installed right, the box mod will not be able to turned on normally.) Though the box mod is not equipped with the auxiliary bar to disassemble the battery, there is a sunken slot at the X position. Vapers can use fingers directly to get the battery out easily. There is no connection gap between the compartment and the cover, but slight wobbling appears sometimes.

Terminator is a box mod features single 18650 battery. It has stronger generality than the ordinary cigarette alternative and can connect any atomizers with 510 thread. However, if the diameter of atomizers are equal to or bigger than 24mm, the edge will be exposed. Picture above is a RDA of 24mm.

The matched finished atomizer is also named Terminator. The structure and style are both very similar to the previous Captain and Blade made by Teslacigs. From the  Glass tube, you can see the huge filling hole of the finished coil. There are four such holes in total. For testing, I fill the tank with 60% VG oil fully and stand it for a night. It was found that only slight oil frying appears and no leaking appears.

Terminator Tank is still the ordinary structure of TESLACIGS RDTA atomizers. The coil connects directly to the top cap. Such structure decreases the length of the vapor flue and makes the vapor get into mouth through a shortest journey. In the light of the workmanship of the atomizer, there is no big problems. However, there is no burs on the black sealing ring at the bottom of top cap, but you might have a not very good hand feel.

The popular gold-plated electrodes are very common, while this  unique TESLACIGS brand uses the silver-plated electrodes. When you disassemble the atomizer, you will see just several parts (not very many) which is convenient for cleaning. After you finish a tank and want to clean it, you can disassemble the coil and wipe the condensed liquid inside the base with tissue.

The terminator atomizer adopts the top filling system. The official instruction book suggests that the air inlet be closed before opening the top cap for filling.  The inflow of the atomizer is positioned by a post. When you look into the inside of the airflow hole, you can see there is a buffer space. In actual use, the  suction resistance of this atomizer will not be to empty. When the inlet hole is half closed, the feel of suction is very comfortable.

In the light of flavor, the reducing capacity of the oil by using the 0.2Ω coil is very satisfying. The overall reducing degree is very even. For example,  when you use the fruit oil flavored mint blackcurrant,  this atomizer will not amplify the flavor of mint, neither the sweet flavor of blackcurrant. All the flavors are very even.

There is no ignition delay. The simple single button operation is really basic. On the instruction book, there is the detailed information introducing the instruction lights. It can instruct the remaining capacity of battery and malfunction by different colors and glittering.

In the light of the atomizer of Tesla Terminator, there is no leaking problem and the oil deflecting speed is also satisfying to most new vapers.

Secure Link: www.urvapin.com 

Recommended Products:




“Mech Mod Users”—Reviews on 5 Mods of Teslacigs

With its unique output mode, short delay, stable and secure functionality, and easy-to-operation, Semi-mech mod has always possessed a unique position in the market of ecig mod. Teslacigs has never stopped its research and innovation on mec mod. Here, I’m going to review the history of Teslacigs’ evolvement with you guys!

Looking back to the history of Teslacigs’s products releasing history, it seems that since its first built-in mod Stealth, Teslacig has gone far on the road on Semi-mech mod, from the initial chip voltage-stabilizing mod, step to step, to potentiometer-regulating-voltage semi-mech mod.

Let’s start from its first built-in voltage-stabilizing mod Stealth!

Teslacigs Stealth

The built-in design conception of Stealth is not originated from Teslacigs, but this Stealth Kit is the real one that brings this design conception to such a situation.

Teslacig has compressed the atomizer and mod to a much smaller size, giving the mod a size of 7(height)*5(length)*5(width). Only one hand can grab the whole body of the mod, a very mini feeling. Rubber Paint brings fine and smooth hand feeling, combined with tiny mellow and full arc and fine workmanship, making the hand feeling of this mod a bright spot.

The most important point, also the theme of this article “constant voltage output”, since it features the mech output mode, the mod has  no  other buttons other than the firing button, no screen either. Which is very easy for operation. Combined with the Kit-matched atomizer, the mod can give a very good usage experience.

The other feature of the mech-styled output mode is that it is easy to ignite  and the explosion time is extremely short, which is another plus index for user experience. Of course, the output mode of constant voltage is very unique. The specific output power is decided by the resistance value of the coil, calculation formula U²÷R=P, which can give the atomizer a constant output. However, the atomizer of Stealth is configured with the 316 stainless heating coil. The resistance value of the 316 stainless steel heating coil will increase gradually with the rising temperature, thus resulting a curve output. The low temperature on ignition results a low resistance value, accordingly bringing strong current and rapid temperature rising. When the temperature rises to some extent, the resistance value will increase and the current becomes weak, consequently the output power is lowered.

Teslacigs allocates this atomizer with two finished coils, 0.28Ω and 0.6Ω. The 0.28Ω coil can bring huge vapor and the 0.6Ω coil can be used for small air inlet. They are fit for different users with different habits. This mod can support a minimized 0.1Ω coil and can match up to most RDTA tank with the capacity of 22mm. But the appearance design of the mod decides that it can match up with most of the 22mm RBA. But the design of the mod has decided that it cannot match with the RDA and RDTA atomizer which is very pitiful.  The battery capacity is also the short slab of this mod. After all, you can not sell the cow and drink the milk. When owning its small size, you can not ensure that it will have a long battery endurance. Its battery capacity is 2200mah, which is equivalent to a Sony C4. However, with the charging current of 1A, it will only take 3 hours to charge the mod to the full, which can be a makeup to its battery durance.

 Teslacigs Invader 3

Since the first two generations of the Invader styled with the wooden gunstock shape didn’t appear in the inland market, I can not find a way to review on them. Let’s start our review from the third generation! The Teslaecigs Third Generation can be regarded as the masterpiece in all the semi-mech devices. In the situation that ecig mods develop rapidly, after nearly one year competition in the market, with its violent output, simple operation and rapid response, the third Generation is still popular among the vapers, becoming a symbol representing semi-mech ecig mods in Chinese vapers’ hearts.

Except for its constant voltage box, this mod is also equipped with a setting of potentiometer, which can adjust the voltage in some extent. In this way, the output mode is not single voltage output. The user can adjust it to a  proper mouth feel and vapor volume. The potentiometer can separate the voltage into 5 gears and it’s pretty easy to operate. Moreover, the operation mode that clicking the ignition button five times continuously to start the mod can also well avoid the mindless touch  on the ignition button when carrying with it.  Meanwhile, it features fast ignition bringing by mechanical power supply and rapid explosion, together with the lowest voltage 3.6V to the highest voltage 6.6v, making the violent output of this mod to a stunning degree!

This third generation Invader adopts a design that dual batteries in series connection, when increasing the voltage, it also increases its battery durance. The durance of the dual batteries are pretty good, and the endeavor is made on the matching of the mod body and battery compartment. Among the dual batteries mods, the body of this mod is pretty mini.

Of course, this mod is not that perfect. The baking finish is not strong enough to resist heavy abrasion and is easy to get abraded. And it is not harmonious to have a 22mm atomizer built on it. Moreover, the user can not know the battery reserve accurately except guessing, and the body is also heavy.  Apart from it has so many weakness, but its excellent performance and performance versus price ratio make this mod a big success!

Teslacigs three 150w

Teslacigs three mod is a mech mod with protective chipset. On hearing its name, you might think it’s the same mod as Invader 3, and in the ecig field, these two mods are always compared. Actually, their working mode are totally different! The Invader 3 adopting the  potentiometer structure can achieve the effects of increasing voltage and stabilizing voltage output! While, the output of Teslacigs 3 totally depends on the voltage of the battery. That is to say, the output voltage of this mod is the same with 18650 battery. Theoretically, the highest voltage is 4.2V, thus in the natural output of the battery, the real output will decrease, approximately 3.7V. However, the Invader 3 can reach the highest to 6.6V, thus, the performance and mode of the two mods are different fundamentally.

Also because of the output mode, it’s not proper for this mod to use the fancy coil made of ordinary A1 heating coil. Since the fancy coil of the A1 heating coil is featured with slow heating, and the mechanical output is relatively fixed and cannot make the coil heat fast just like the variable voltage mod by setting output curve or directly adjust the output power up. So, if the user wants to use the fancy coil,  a preheating process is needed to  achieve good effect. But in this mode , if the user uses the simple-structured and low resistance coil, it can perform pretty well, fast response, rapid explosion and huge vapor.

This mod uses the built-in battery, the capacity of the battery is 5000mah.  The highest charging current is 2A. When charging with an 2A charger, it only takes 3 hours for the battery to be full charged. Also, the most important feature of this mod is that it can be used as a power bank when other electronic devices are out of power.  Try to think that

when you are outside by yourself, what are you going to do when your cell phone is out of power while you are using the navigation. At this time, you can take out your ecig and connect it to your cell phone with a USB, then all the embarrassment is soon solved.

So, The advantage of this mod is its simple operation, no delay, low resistance explosion, long battery endurance, LED battery indication light and the power bank design, which are the unique features of mechanical mode. The weakness is also relative, the battery is irreplaceable, the output of the high-valued resistance doesn’t perform well, the fancy coil needs preheating, the mouth feel cannot be adjusted by adjusting the output and etc.  All in all, this mod fits well for the lazy people and inexperienced vapers.

Teslacigs Stealth Mini 

This mod is the compact version of the Stealth. On the basis of the original handy mod, this mod is further compressed to an extent of 4(length)*2(width)*6.5 (height). The coating is changed into painting, together with the round body, bringing this mod a very good grabbing feel.

The compressed body of the mod results that this mod can only use the matched original 16.5mm atomizer. The oil tank is only 1.5ml, the matched atomizer is a SS316 coil of 1 Ω, which is more inclined to the mouth feel, thus it can match with the matched atomizer of this mod regarding to the oil consuming of this mod!

The compressed body also brings imperfect performance. The maximal output current is decreased from 40A to 16.5A, and the battery capacity is also decreased from 2200mah to 1300mah. Even if the body is compressed, it can match up with the matched coil of the atomizer. And as regard to its endurance, the high resistance means low battery consumption, the actual endurance time does not shrink obviously.

Teslacigs Nano 120w Box Mod

This mod is a new release from Teslacigs. It’s an elegant mod with a special design. The pattern engraved on it gives it a very solemn industrial feeling. The metal-looked body weighs very heavily, totally 250g, not easy to carry around!

Different from other traditional mech mods with click buttons, Tesla Nano features a on-off switch, which is both secure and convenient, no need to worry about hit it by accident.

With an OLED screen, it is easy to monitor the wattage and battery capacity. This mod is not chargeable, instead, it has to be supported by two 18650 cells. The Max Output Voltage is 9v and the Max output current is 35A. In the VW mode, the resistance can lower down to 0.1 ohm, creating huge vapor. This mod is also different from the traditional box mod with a Taste Mode, 4 modes in total, norm, soft, hard, user.

With its multifunction, Tesla Nano 120w is much applicable to those ecig players.


According to these five mech mods, we can find the features of Teslaecigs products. The Teslaecigs products are separated into two parts, one is oriented to the ecig players, and the other part is oriented to the smokers who wants to get rid of smoking or find the substitute of cigarettes.  The products oriented to the players is gifted with pretty strong performance, more adjustment and using space, and comfortable operation experience.

The products designed for the smokers are simple for operation, can provide stable experience to users,  features with handy volume and comfortable grabbing feel.  I must say, such designs are much close to the original intention of ecigs. Ecigs were born for quitting smoking and replacing cigarettes. Nowadays, many devices when equipped with good performances and variable operation modes, they are also added with many complicated operations for using and too big volume and heavy weight.

These devices are OK for the players, but for those who only needs quitting smoking and replacing cigarettes, they are too complicated. On this basis, it is actually not good for the promotion and propagation of cigarettes. Especially in the situation inland, many elder smokers have bias to ecigs. The expensive prices of the high-end mods can scare people off, huge vapor easily leading people to think the bad side, complicated operation makes it hard for people to use it. DIY is also another problem that increasing the operation difficulty. All these can hinder the promotion to these people. So, actually these high-end mods can be only used in the player groups.

For promotion, we actually need those ecigs that are easy for using, can provide excellent experience for users and are portable.  Personally, the polarized concept of Teslaecigs are pretty good.  In one way, it satisfy the needs of the players, in another way, it can promote VAPE well and make more people envisaging and understanding it.

Article Source:  “Mech Mod Users”—Reviews on 5 Mods of Teslacigs

Secure Link:www.urvapin.com

Recommended Products:





Coolvapor Lava RTA Atomizer reveiw

With the development of the ecig industry, many creation groups constituted by ecig players gradually emerged. They are full of enthusiasm to summarize the accumulated usage experience of devices and collect them together. Then based on the same design model and in the name of an independent group, they will launch some strong-targeted products.

The Lava RTA shared today was launched by a rising research team named Coolvapor. What a Lava Rta this research team constituted by experienced players and professional ecig practitioner will bring to us? Let’s move forward!

Lava Rta adopts a brief package,  and the brown paper sealed by a rope gives the package a slight of retro feel.  Apart from the sign of Coolvapor  and the QR code of the Official account, the side face is printed with a  diagram of the sectional structure.  When you open the package, the first thing into your sight is an scratch card with anti-counterfeit label. It is said that this scratch card can be used for the lucky draw and the gifts include Iphone7, limited Lava Rta as well as some other attractive stuff (subject to the final confirmation of the official information)

Apart from the Scratch card mentioned previously, when you open the package, you will also find a very intimate Chinese manual, which elaborates how to use the atomizer, how to make the heating coil and the detailed structure of the atomizer. The spare seal ring, Allen Key, glass tube and atomizer are fastened separately with dense cotton.  The reason why there is detailed description on the package is that before you use he Lava Rta, he or she can feel the full sincerity of the ground breaking work from all its aspects.

It features a diameter of 24 MM and there are two colors for choice, the SS original color and the electroplating black.  The brief straight outlook is matched with the short bold POM drip tip, and the slash on the side face can rightly echoes the strokes of its name LAVA. From the perspective of its outlook, the good looking of this RTA can please many players. No matter it matches the box mod or mech mod, it is pretty in both ways and appealing to the eyes!

The POM drip tip with big diameter conforms to the conception of integration. The cap on the top is made of POM materials and the lower part is made of SS metal gold.  The two parts are integrated into one and are inseparable. The one with the match color of SS metal gold can be clearly distinguished between the two materials. The drip tip adopts an incision of slope angle, giving the shape of the atomizer a strong feeling. During using, no condensation situation appears.  From the bottom, you can see the design mark of the group  and the serial number of the atomizer. The protrusion length of the gold-plating electrode can drive the mech mod securely and the overall workmanship is excellent.

The air inflow adjustable ring can be dissembled separately.  Structurally, it can make users to associate it with the radiant PETRI RTA released a  while ago.  And in the inner side of the bottom inflow adjustable ring, you can see the bayonet and the groove. The groove is convenient for positioning the base thus for applying force to dissemble them. The slot is speculated to have two usages. The first one is to give the adjustable ring a comfortable sense of damping, and the second one is to avoid leaking of air after closing the intake.

After you dissemble the atomizer, you will see the bottom part is a split type. It soon makes you to think of the Petri Rta which needs loosening and fastening the electrode screw, and the Pico Rta which needs to lock the ring on the unfixed split base and some other troublesome operation method.

But after the practical usage experience, we can find that the Lava Rta needs an extra step, but the step has never caused a “irritating” using feel. It will be elaborated in details below.

The atomizer tube and the base are the structural core of Lava Rta. There is a groove in the inner side of the gold-plating atomizer tube, which is used for positioning the filling hole and locking the electrode for spin assembling and disassembling.

As regard to the workmanship and finishing degree, it is difficult to find the workmanship weakness of this atomizer, especially the damp is appropriate when dissembling and assembling the parts, and the size of the sealing ring are just right.

The electrodes adopt the most common style of two poles with four holes. The locking hole can just allow in an entwining rod with the diameter of 1 MM. The bottom of the LAVE electrode directly adopts the standard 510 connection, not very many complicated procedures brought by the rotation-typed unfixed base of PICO RTA and the unscrew/screw positive electrode screw of PETRI RTA. The electrode of LAVA RTA is separate from the base. Coil making  and burning can be operated on the510 connection thread which is for connecting the mod and work table.

The electrodes adopt the most common style of two poles with four holes. The locking hole can just allow in an entwining rod with the diameter of 1 MM. The bottom of the LAVE electrode directly adopts the standard 510 connection, not very many complicated procedures brought by the rotation-typed unfixed base of PICO RTA and the unscrew/screw positive electrode screw of PETRI RTA. The electrode of LAVA RTA is separate from the base. Coil making  and burning can be operated on the510 connection thread which is for connecting the mod and work table.

Before making the coil,  you can observe the structure of the top.  The “L” seal ring can fix the glass tube more effectively and reach a more effective cushion effect. And the filling seal ring on the top is also slightly different from the ordinary type. LAVA RTA uses the embedded seal ring and the other side is the “outer convex” metal. The two parts connecting together to form a close “valve”.

If the mech mod is adopted, the material of NI80 can be used for the coil. If the mod is of ordinary power, the material of A1 can be used. Since the coil making table is of limited space, we suggest that you

choose the coil with a diameter of 24G, the circle diameter of 2.5 and twist into 6 to 8 loops, thus to bring a balanced taste experience.

It’s worth mentioning that it’s also very simple to make the cotton of LAVA RTA, just trimming the cotton to the proper length and then put it in the cotton slot. When installing the glass tube, you can find the four filling holes are positioned very precisely by the groove. As long as the quantity of the cotton is not too little, leaking will not appear. When the cotton on the base is installed, you can aim the top part of the atomizer to the groove directly, insert it to the base and screw on the base.

Because of the sealing effect of the intake adjusting ring, there are completely no back flow in the process of using. To adjust the air hole has an obvious effect on the drawing resistance. The top lid is very thick, apart from its good insulation effect, biggest highlight of it is that you can completely put the drip tip of the atomizer much deeper into the mouth. In this way the huge vapor can reach the tongue tip directly, thus you can vape mouth-to-lung at your will. No matter the volume, the density and the reduction degree of the oil flavor, they can all give you a pretty good usage experience.

All in all, this LAVA RTA has a balanced performance on vapor and flavor. Excepting that you need to take one more step when making the coil, you can hardly find other weaknesses on its workmanship, reliability and taste. However, as a research team constituted by experienced players and professional practitioner,their ground breaking work can be really satisfying—endowed with good looking, but choose to stand out by functionality! Good both inside and outside is the feeling after using this LAVA RTA.

Article Source: Experiences bring out creation! Vape on with Cool Vapor Lava Rta!

Secure Link: www.urvapin.com

Recommended Products:





Stylish Vape Pen–Smok Stick V8 3000mAh Baby Starter Kit


smok stick v8/smok stick v8 kit/ smok stick v8 kit/ stick v8 baby kit

Brief introduction: Smok Stick V8 3000mah baby starter kit is the newest pen style starter kit from Smok.

Sometimes, I chat with vaping friends. Most of them agree that vaping can be a really cool habit in life. It’s healthier than smoking and can be a better cigarette alternative for the smokers. However, after you have deeper understanding on this device, you will realize it’s not only a alternative to replace cigarette. It’s actually a daily habit and a kind of fashion in life.

Recently, I have just had Smok Stick V8 Baby in my collection. After vaping on it for a few days, I have to say I really love it. Unlike other hefty ecig devices, this Smok Stick V8 Starter Kit is really convenient for carrying out. The only one button is pretty easy for operation.

Stick V8 is composed of the TFV8 big baby tank and the Stick V8 Battery. The TFV8  Big Baby tank features a juice capacity of 5ml, a medium level. The most unique design of Smok Stick V8 is its rotary filling system. When refilling the tank, you just need to screw off the drip tip.

The Stick V8 box mod adopts a built-in 3000mAh battery which is powerful and durable and can bring you massive cloud of vapor.  The voltage range is from 3.4v to 4.2v. Its charge time is about 2 hours and vape time turns out to be more  than 3-4 hours.

Last weekend, I was invited to join an outdoor trip. I was worrying about it might be boring there. So I grabbed this Stick V8 Starter Kit with me. It was during this trip that I thought this Smok Stick V8 Starter Kit was really suit for carrying out. When you go out,  you just put it in your pocket and when you need to use it, you just take it out and click the fire button five times to start vaping on. The 5ml juice capacity and 3000mah battery capacity can keep it operating for several hours.

In summary, this Smok Stick V8 is worth trying with the simple operation, especially the new vapers.  Most importantly, it’s a good ecig device to carry out.

Article Source:  Stylish Vape Pen–Smok Stick V8 3000mAh TFV8 Big Baby Starter Kit

Secure Link: www.urvapin.com

Recommended Products: