I have to say, for this time, Teslacigs impresses me again with its new release—Tesla Biturbo Mech Dual RDA Starter Kit. It has the ability to fire two RDAs at the same time!
From the appearance, Tesla Nano looks just like an old lighter at my first sight. Then it’s cool to find that there are actually two RDAs on it. Users can add two different juices of different flavors to enjoy a complex and unique taste on vaping.
The overall Tesla Biturbo Mech Dual RDA Starter Kit is constructed by the drip tip and top caps (together), two RDAs, and the battery compartment.
To build and burn the coil, you have to remove the top cap and trip tip. The two RDAs are both constructed by two electrodes and you build them just in the normal way separately. The most unique feature of this starter kit is that you can drip two different flavored juices to create a combined flavor.
On the side of the starter kit, it is the fire button. At the bottom of the kit, there are two black round buttons that you can control the two channels—meaning the two RDAs. There are two LED lights on the lower front side.
Except for vaping a complex combined flavor, you can also choose to vape two different pure flavor just by open or close either of the two RDAs.
To power the kit, you need dual 18650 batteries. Press the fire button five times consecutively, the kit will enter into the stand-by mode. By pressing the channel selection button A/B to open or close the channel A/B.
When channel A is opened, the LED A will be on and RDA A will work upon pressing the fire button; when channel A is closed, the LED A will be off and RDA A will not work upon pressing the fire button. When channel B is opened, the LED B will be on and RDA B will be on and RDA B will work upon pressing the fire button; when channel B is closed, the LED B will be off and RDA B will not work upon pressing the fire button.
Guys, please remember, safety is prior to vaping. Tesla Biturbo takes full consideration of safety. Four kinds of protections as below:
- Over Puffing Protection: The device will be deactivated after continuous puffing of more than 10 seconds. The corresponding LED will flash for 8 times and the device will enter into the stand-by mode.
- Reverse Connection Protection: If batteries are inserted incorrectly, the device will fail to power on and will prevent any damage to the chipset.
- Low Voltage Alert: When the voltage drops below 7.5V, corresponding LED will flash for 15 times and the device will power off.
- Atomizer Short-circuit Protection: When an atomizer short circuit occurs, corresponding LED will flash for 5 times rapidly and the device
Tesla Biturbo Mech Dual RDA Starter Kit Features & Spec:
1 or 2 RDAs Arbitrary Switch
Channel Selection Button
Dual 18650 Cells Setup
Connector Bridge For RDAs
Great Vapor Productions
Wide Bore Drip Tip
Airflow Control System
Enjoy Two Flavors Simultaneously
Biturbo Mech Mod
Dimension: 52*26*107mm(starter kit) / 52*26*88mm(Mod)
Material:Zinc Alloy(Die Cast)
Cell Type: 2 Hi-drain 18650 cell(Discharging current should be above 30A)
Thread Type: 510 thread
Min resistance: 0.1Ohm(Single RDA)/0.2Ohm(Dual RDAs)
Input Voltage Range: 6.0V~8.4V
Standby Current: < 5uA
LED Indicator: Blue
Protections: Over puffing protection/ Reverse connection protection/ Atomizer short-circuit protection/ Low voltage alert.
Biturbo Mech RDA
Adjustable Aiflow: Yes
Tesla Biturbo Mech Dual RDA Starter Kit Package:
1 * Biturbo Mech Mod
2 * Biturbo Mech RDAs
1 * Connector
1 * Drip Tip
4 * Clapton Wire
6 * Silicone Rings
1 * Screwdriver
8 * Screws
2 * Organic Cotton
1 * USER Manual
Tesla Biturbo Mech Dual RDA starter kit is right on sale at Urvapin!